Broad Form Sample Clauses

A Broad Form clause is designed to extend the scope of indemnification or liability coverage to include not only the direct actions of a party but also those arising from the actions of third parties, such as subcontractors or agents. In practice, this means that one party may be required to assume responsibility for losses or damages caused by others connected to the project, even if the indemnified party is partially at fault. The core function of a Broad Form clause is to maximize protection for the indemnified party by shifting a wider range of risks and liabilities onto the indemnifying party, thereby reducing potential gaps in coverage and disputes over responsibility.
Broad Form. The Contractor’s insurance shall contain broad form contractual liability coverage.
View SourceView Similar (6)

Related to Broad Form

  • Policy Form Each insurance policy required pursuant to Paragraph ----------- 15. a. above shall be issued by an insurance company licensed in the State of California and with a general policyholders' rating of "A+" or better and a financial size ranking of "Class VIII" or higher in the most recent edition of Best's Insurance Guide. Each insurance policy, other than Tenant's workers' compensation insurance, shall (i) provide that it may not be materially changed, cancelled or allowed to lapse unless thirty (30) days' prior written notice to Landlord and any other insureds designated by Landlord is first given, (ii) provide that no act or omission of Tenant shall affect or limit the obligations of the insurer with respect to any other insured, (iii) include all waiver of subrogation rights endorsements necessary to effect the provisions of Paragraph 16 below, and (iv) provide that the policy and the coverage provided shall be primary, that Landlord, although an additional insured, shall nevertheless be entitled to recovery under such policy for any damage to Landlord or the other Indemnitees by reason of acts or omissions of Tenant, and that any coverage carried by Landlord shall be noncontributory with respect to policies carried by Tenant. Each such insurance policy or a certificate thereof shall be delivered to Landlord by Tenant on or before the effective date of such policy and thereafter Tenant shall deliver to Landlord renewal policies or certificates at least thirty (30) days prior to the expiration dates of expiring policies. If Tenant fails to procure such insurance or to deliver such policies or certificates, Landlord may, at its option, procure the same for Tenant's account, and the cost thereof shall be paid to Landlord by Tenant upon demand. Landlord may at any time, and from time to time, inspect and/or copy any and all insurance policies required by this Lease. Nothing in this Paragraph 15 shall be construed as creating or implying the existence of (i) any ownership by Tenant of any fixtures, additions, Alterations, or improvements in or to the Premises or (ii) any right on Tenant's part to make any addition, Alteration or improvement in or to the Premises.

  • Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.

  • Timing and Form of Payment Once a Restricted Stock Unit vests, the Participant will be entitled to receive a Share in its place. Delivery of the Share will be made as soon as administratively feasible following the vesting of the associated Restricted Stock Unit. Shares will be credited to an account established for the benefit of the Participant with the Company’s administrative agent. The Participant will have full legal and beneficial ownership of the Shares at that time.

  • SECURITIES FORMS SECTION 201.

  • Time and Form of Payment (a) Each Actual Award shall be paid in Common Stock pursuant to the Award Agreements, subject to any required withholding for income and employment taxes. Dividend equivalent rights shall be paid in cash in a single lump sum to the extent earned. (b) Actual Awards will be paid on or after the third business day after the Company’s annual audit for the last fiscal year of the applicable Performance Period has been completed and the Company’s annual report on Form 10-K for such fiscal year has been filed with the Securities and Exchange Commission, but in no event later than the last day of the calendar year that begins immediately following the end of the applicable Performance Period. (c) Notwithstanding 4.3(b), in the event of a Participant’s death, the Participant’s estate will be eligible to receive an amount not greater than one-hundred percent (100%) of the Participant’s Target Award, prorated to reflect the number of days he or she worked during the applicable Performance Period, and such amount, which will be determined in the Committee’s sole discretion, will be paid in the year following Participant’s death. For clarity, prorated awards will be calculated as follows: one-hundred percent (100%) of a Participant’s Target Award will be multiplied by a fraction, the numerator of which is the number of days the Participant was continuously providing services to the Company during the applicable Performance Period through the date immediately prior to the Participant’s death, and the denominator of which is the total number of days in the applicable Performance Period. (d) Notwithstanding anything to the contrary in this Plan, no payments contemplated by this Plan will be paid during the six-month period following a Participant’s Separation from Service unless the Company determines, in its good faith judgment, that paying such amounts at the times indicated in paragraphs 4.3(b) and (c) would not cause the Participant to incur an additional tax under Code section 409A, in which case the Actual Award shall be paid on the first day of the seventh month following the Participant’s Separation from Service. (e) The Compensation Committee of the Board may require forfeiture or a clawback of any incentive compensation awarded or paid under this Plan in excess of the compensation actually earned based on a restatement of the Company’s financial statements as filed with the Securities and Exchange Commission for the period covered by this Plan.