Billing and Payment Procedure for Forest Products Delivered Sample Clauses

Billing and Payment Procedure for Forest Products Delivered. The State will compute and forward to Purchaser a billing statement of charges for forest products delivered during the billing period at the delivered rate shown in P- 028.2 clause. After receipt of the billing statement, Purchaser’s payment must be received by the Department of Natural Resources on or before the due date shown on the billing statement. Purchaser agrees to make payment, payable to the Department of Natural Resources. Failure to pay on time for forest products delivered is considered a breach of contract. Included with the billing statement will be a summary report for the billing period compiled by the State or their log and load reporting service. The State will adjust final xxxxxxxx to account for any State approved payment reductions. P-080 Payment Account Refund Advance payments made under P-045 or P-045.2 remaining on account above the value for the charges shall be returned to Purchaser within 30 days following the final report of charges. Refunds not made within the 30 day period will accrue interest at the interest rate, as established by WAC 000-000-000, computed on a daily basis until paid.
AutoNDA by SimpleDocs
Billing and Payment Procedure for Forest Products Delivered. The State will compute and forward to Purchaser a billing statement of charges for forest products delivered during the billing period at the delivered rate shown in P-028.2 clause. After receipt of the billing statement, Purchaser’s payment must be received by the Washington State Parks and Recreation Comission on or before the due date shown on the billing statement. Purchaser agrees to make payment, payable to the Washington State Parks and Recreation Comission. Failure to pay on time for forest products delivered is considered a breach of contract. Included with the billing statement will be a summary report for the billing period compiled by the State or their log and load reporting service. The State will adjust final xxxxxxxx to account for any State approved payment reductions. P-080 Payment Account Refund Advance payments made under P-045 or P-045.2 remaining on account above the value for the charges shall be returned to Purchaser within 30 days following the final report of charges. Refunds not made within the 30 day period will accrue interest at the interest rate, as established by WAC 000-000-000, computed on a daily basis until paid.
Billing and Payment Procedure for Forest Products Delivered. The State will compute and forward to Purchaser a billing statement of charges for forest products delivered during the billing period at the delivered rate shown in P- 028.2 clause. After receipt of the billing statement, Xxxxxxxxx’s payment must be received by the Department of Natural Resources on or before the due date shown on the billing statement. Purchaser agrees to make payment, payable to the Department of Natural Resources. Failure to pay on time for forest products delivered is considered a breach of contract. Included with the billing statement will be a summary report for the billing period compiled by the State or their log and load reporting service. The State will adjust final xxxxxxxx to account for any State approved payment reductions. P-080 Payment Account Refund Advance payments made under P-045 or P-045.2 remaining on account above the value for the charges shall be returned to Purchaser within 30 days following the final report of charges. Refunds not made within the 30 day period will accrue interest at the interest rate, as established by WAC 000-000-000, computed on a daily basis until paid. DRAFT DRAFT DRAFT Section L: Log Definitions and Accountability L-010.2 Forest Products Conveyed Forest products conveyed are logs or parts of logs delivered meeting the sorting criteria defined by clause G-022.2 and manufacturing standards defined by clause G-024.2 of this contract L-014.2 Sorts Delivered to Incorrect Destination Purchaser has agreed to purchase the sort as described in the G-022.2 clause. In the event a load from a different sort is delivered to Purchaser, Purchaser may reject the load. If Purchaser receives an incorrectly delivered load, they shall notify the State within 24 hours. If the Purchaser accepts the load, provisions in the P-035.2 or P-036.2 clause may apply.
Billing and Payment Procedure for Forest Products Delivered. The State will compute and forward to Purchaser a billing statement of charges for forest products delivered during the billing period at the delivered rate shown in P- 028.2 clause. After receipt of the billing statement, Xxxxxxxxx’s payment must be received by the Department of Natural Resources on or before the due date shown on the billing statement. Purchaser agrees to make payment, payable to the Department of Natural Resources. Failure to pay on time for forest products delivered is considered a breach of contract. Included with the billing statement will be a summary report for the billing period compiled by the State or their log and load reporting service.

Related to Billing and Payment Procedure for Forest Products Delivered

  • Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. P-036.2 Missorts and Payment Reduction for Delivered Forest Products Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R Where: B = Bid rate from P-028.2 clause M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code P-037.2 Mismanufacture and Payment Reduction for Delivered Forest Products Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.

  • Billing and Payment Procedures All invoices must be submitted electronically via email in PDF format to xxxxxxxxxx@xxx.xxx. Each email may only contain one invoice and must include Provider’s name and the CPS Purchase Order number. All invoices must include: ● Provider name and payment address ● Unique invoice number (determined by Provider) ● Valid purchase order number (only one PO number may be referenced on each invoice) ● Invoice date ● Itemized description of the Services rendered and/or goods delivered ● Date the Services were provided and/or goods were delivered to CPS ● Detail pricing information such as quantities, unit prices, discount, and final net amount due Invoices shall be submitted in a timely manner. The final invoice shall be submitted no later than ninety (90) days after the expiration or termination of this Agreement. If Provider has more than one contract with the Board, separate invoices must be submitted for each contract. The Board shall process payments in accordance with the Local Government Prompt Payment Act (50 ILCS 505/1 et seq.). The Board reserves the right to request additional information and supporting documentation necessary for the Board to verify the Services and Products provided under this Agreement.

  • Reporting and Payment Procedures Risk Summary Sheets for each risk and a monthly Bordereaux of all risks ceded shall be submitted to the Reinsurer within 20 working days after the last day of each month. Any premium amounts due the Reinsurer shall be paid with the Bordereaux. Risk Summary Sheets for each insured shall include the following information:

  • Billing and Payment Procedures and Final Accounting 6.1.1 The Connecting Transmission Owner shall xxxx the Interconnection Customer for the design, engineering, construction, and procurement costs of Interconnection Facilities and Upgrades contemplated by this Agreement on a monthly basis, or as otherwise agreed by those Parties. The Interconnection Customer shall pay all invoice amounts within 30 calendar days after receipt of the invoice.

  • BILLING PROCEDURES AND PAYMENT COMMERCE will pay Contractor upon acceptance of services and deliverables provided and receipt of properly completed invoices, which shall be submitted to the Representative for COMMERCE not more often than monthly nor less than quarterly. The parties agree this is a performance-based contract intended to produce the deliverables identified in Scope of Work (Attachment A). Payment of any invoice shall be dependent upon COMMERCE’S acceptance of Contractor’s performance and/or deliverable. The invoices shall describe and document, to COMMERCE's satisfaction, a description of the work performed, the progress of the project, and fees. The invoice shall include the Contract Number 00-00000-000. If expenses are invoiced, provide a detailed breakdown of each type. A receipt must accompany any single expenses in the amount of $50.00 or more in order to receive reimbursement. Payment shall be considered timely if made by COMMERCE within thirty (30) calendar days after receipt of properly completed invoices. Payment shall be sent to the address designated by the Contractor. COMMERCE may, in its sole discretion, terminate the Contract or withhold payments claimed by the Contractor for services rendered if the Contractor fails to satisfactorily comply with any term or condition of this Contract. No payments in advance or in anticipation of services or supplies to be provided under this Agreement shall be made by COMMERCE. Grant Start Date COMMERCE will pay the Contractor for costs incurred beginning July 1, 2022, for services and deliverables described under this Agreement.

  • Billing and Payment Terms 3.1 You acknowledge and agree that NCR Voyix will charge all applicable fees and charges due to the payment card or other form of non-invoice payment method that you provided to NCR Voyix: (a) at the beginning of each billing cycle for all recurring fees for the Service; (b) at the end of the billing cycle for all transaction fees incurred during the billing cycle; (c) upon Order placement and prior to shipment of any Hardware purchased outright or subject to the terms of an Extended Payment Program (as defined below) when applicable; and (d) upon Order placement for any additional services that are not included as part of the recurring fees for the Service. NCR Voyix or its vendor may charge an additional fee for payments processed by credit card.

  • Billing and Payment The Price will be itemized and included on your xxxx from the DSP, and is due and payable to the DSP on the same day your DSP xxxx is due. You will continue to be billed by your DSP taxes and other charges consistent with filed tariffs at the Illinois Commerce Commission to transmit and distribute the Retail Power supplied to you per this Agreement. You should continue to follow any xxxx payment procedures set forth between you and the DSP. You agree to accept the measurements as determined by the DSP for purposes of accounting for the amount of Retail Power services provided by DES under this Agreement. If the DSP is unable to read your meter, the DSP will estimate your usage and your charges will be calculated accordingly and adjusted on a future xxxx. DES’S ability to supply you under this Agreement is conditioned on the DSP accepting DES’S enrollment of your account for consolidated billing and purchase of receivables by the DSP. If you are not eligible for your DSP’s consolidated billing and purchase of receivables, you will need to secure eligibility with your DSP before DES can serve you. Should the DSP cease providing consolidated billing and purchase of receivables for your account and/or commence billing DES for any charges relating to you, DES will xxxx you directly and you will pay DES for all such charges pursuant to the payment provisions specified in DES’S xxxx.

  • Rates and Payment Process Subject to the SAA, the Project Funding for the provision of the Services shall be as specified in Appendix A to this PFA.

  • Certification for Federal-Aid Contracts Lobbying Activities A. The CONSULTANT certifies, by signing and submitting this Contract, to the best of its knowledge and belief after diligent inquiry, and other than as disclosed in writing to the LPA prior to or contemporaneously with the execution and delivery of this Contract by the CONSULTANT, the CONSULTANT has complied with Section 1352, Title 31, U.S. Code, and specifically, that:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!