Battery Technical Specifications Sample Clauses

Battery Technical Specifications. Items RESU10H Prime (EH153064P8S1) RESU16H Prime (EH257064P8S1) Voltage Range Charge 420 ~ 450V Discharge 350 ~ 410V Usable Energy1) (at battery DC output) 9.6kWh 16.0kWh Max. Power / Max. Current 5kW / 14.3A 7 kW / 20A Peak Power (for 10sec) 7kWp 11kWp Standard Charging /Discharging Condition Charging Power Following Power limit under 0.3 CP @ 25±2℃ (77±3.6℉) Cut off Condition Charge Power limit = 0 or SoC 100% Discharging Current Following Power limit under 0.3 CP @ 25±2℃ (77±3.6℉) Cut off Condition Discharge Power limit = 0 or SoC 0% Round-trip Efficiency >90.3% (under specific condition) Communication Interface CAN 2.0B (500kbps), RS485 Environmental Installation Method Standing / Wall Mount Fixture Standing Installation Site Indoor2) / Outdoor Operating Temperature Range Discharge -20 ~ 50℃ (-4 ~ 122℉) -20 ~ 50℃(-4 ~ 122℉) Charge -10 ~ 50℃ (14 ~ 122℉) Optimal Range 15 ~ 30℃ (59 ~ 86℉) Storage Temperature Range (At shipping state) 1) - 30℃ ~ 60℃ (-22 ~ 140℉) (acceptable for 7 days in total)2) - 20℃ ~ 45℃ (-4 ~ 113℉) (acceptable for the first 6 months)3) - 20℃ ~ 30℃ (-4 ~ 86℉) (acceptable for 7th ~ 12th month) Operating/Storage Humidity Range 5 ~ 95%, RH (Non Condensing) Altitude Max. 2,000m (6562ft) Cooling Strategy Natural convection Reliability & Certification Safety Cell UL1642 Battery Pack CE/ FCC / RCM / IEC 62619/ UL1973/ IEC62477 Hazardous Materials Classification Class 9 Transportation UN38.3 (UNDOT) Ingress IP55 1) DOD 100%. DC/DC converter one way efficiency 97.5%. Ambient 77°F (25°C) 2) The ‘Products’ shall not be installed in an airtight enclosure or in an area without adequate air flow to support natural air convection cooling methods. The ‘Product’ shall not be installed in sleeping areas or near flammable materials.
View SourceView Similar (5)

Related to Battery Technical Specifications

  • Technical Specifications The purpose of the Technical Specifications (TS), is to define the technical characteristics of the Goods and Related Services required by the Procuring Entity. The Procuring Entity shall prepare the detailed TS consider that:

  • General specifications For the purpose of this Regulation, the vehicle shall fulfil the following requirements:

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.