Common use of BASIC FLAT CHARGE Clause in Contracts

BASIC FLAT CHARGE. An individual flat charge shall be allowed for each size of Snap-Out form. Only one basic flat charge per form ordered shall be allowed. The basic flat charge shall include all of the following specifications: All preparatory cost such as press make ready including any paper roll change for the first ply, negatives and plates necessary prior to actual press operations shall be included in the basic flat charge. Construction into individual sets shall include the following: All paper and carbons shall be line glued into a 5/8" or a 3/4" stub. Stub size shall be at contractor's option. All paper parts shall be perforated at the stub either 5/8" or 3/4" from edge. All carbon stubs shall be 1/2" shorter than the paper parts on the end opposite the stub unless otherwise specified by the agency. An additional charge will not be allowed if agency requests carbon to extend the remaining 1/2". All carbon sheets shall extend approximately 3/8" into the stub. Carbon paper must be a minimum weight of 7 lb., medium grade, non-processed black, fully coated on one side and horizontally perforated between all sets. The paper included in the basic flat and running charges shall be as indicated below. PLEASE NOTE THIS CONTRACT INCLUDES VIRGIN AND RECYCLED PAPERS. THOSE RECYCLED PAPERS LISTED BELOW MUST BE USED IN LIEU OF VIRGIN PAPER FOR JOBS PRODUCED UNDER THIS CONTRACT. THE CONTRACTOR IS ENCOURAGED TO USE OTHER RECYCLED PAPERS WHEN AVAILABLE. These paperweights for the basic forms are listed as a guide to the contractor. Two and three part forms - All 15# paper Four, Five and Six part forms - 15# on part one, all others 12# paper Seven and Eighth part forms – All 12# paper Agency may request other combinations of the 12 or 15 pound, #4 Grade Registered Sulphite Bond, White or colored at no additional charge. RECYCLED PAPER WEIGHTS AND COLORS THAT MUST BE USED WHEN A FORM USING THESE PAPER WEIGHTS OR COLORS IS REQUESTED. 12 LB. Canary and Pink bond 15 LB. White bond

BASIC FLAT CHARGE. An individual flat charge shall be allowed for each size of Snap-Out form. Only one basic flat charge per form ordered shall be allowed. The basic flat charge shall include all of the following specifications: All preparatory cost such as press make ready including any paper roll change for the first ply, negatives and plates necessary prior to actual press operations shall be included in the basic flat charge. Construction into individual sets shall include the following: All paper and carbons shall be line glued into a 5/8" or a 3/4" stub. Stub size shall be at contractor's option. All paper parts shall be perforated at the stub either 5/8" or 3/4" from edge. All carbon stubs shall be 1/2" shorter than the paper parts on the end opposite the stub unless otherwise specified by the agency. An additional charge will not be allowed if agency requests carbon to extend the remaining 1/2". All carbon sheets shall extend approximately 3/8" into the stub. Carbon paper must be a minimum weight of 7 lb., medium grade, non-processed black, fully coated on one side and horizontally perforated between all sets. The paper included in the basic flat and running charges shall be as indicated below. PLEASE NOTE THIS CONTRACT INCLUDES VIRGIN AND RECYCLED PAPERS. THOSE RECYCLED PAPERS LISTED BELOW MUST BE USED IN LIEU OF VIRGIN PAPER FOR JOBS PRODUCED UNDER THIS CONTRACT. THE CONTRACTOR IS ENCOURAGED TO USE OTHER RECYCLED PAPERS WHEN AVAILABLE. These paperweights for the basic forms are listed as a guide to the contractor. Two and three part forms - All 15# paper Four, Five and Six part forms - 15# on part one, all others 12# paper Seven and Eighth part forms – All 12# paper Agency may request other combinations of the 12 or 15 pound, #4 Grade Registered Sulphite Bond, White or colored at no additional charge. RECYCLED PAPER WEIGHTS AND COLORS THAT MUST BE USED WHEN A FORM USING THESE PAPER WEIGHTS OR COLORS IS REQUESTED. 12 LB. Canary and Pink bond 15 LB. White bond.