Asphalt Binder Clause Samples

Asphalt Binder. THE SECOND PARAGRAPH IS CHANGED TO: When specified, use PG 64E-22 asphalt binder that is a storage-stable and conforms to AASHTO MP 19 (AASHTO M 332), including compliance with the elastic response requirement in Appendix 1. THE FOLLOWING SUBPART IS ADDED:

Asphalt Binder. (a) Five 1-gallon samples of the asphalt binder to be used in the mixture; (b) Recent quality test results from the manufacturer for the asphalt binder including a temperature-viscosity curve; and (c) Manufacturer’s MSDS and product data sheet.

Asphalt Binder. The binder shall be rapid-setting polymer-modified emulsion CRS-2P, conforming to OPSS 1103. A Certificate of Conformance shall be included with the Job Mix Formula submission. As a guideline, the application rate of the emulsion shall range from 1.5 to

Asphalt Binder. Use a PG 76-22 asphalt binder meeting the requirements of 916-1. Mixture acceptance shall meet the requirements of 334-6.

Asphalt Binder a. Use asphalt binder that conforms to AASHTO M 320, Table 1; PG 64-22, PG 58-28 or an approved blend of both grades. The asphalt binder producer is required to provide the asphalt binder quality control plan annually to the ME for approval. Ensure that the quality control plan conforms to AASHTO R 26. Submit to the ME a certification of compliance, as specified in 106.07, for the asphalt binder. The ME will perform quality assurance sampling and testing of each asphalt binder lot as defined in the approved quality control plan. b. Use one or more of the following types of warm mix asphalt (WMA) additives or processes:

Asphalt Binder a. Percent of asphalt binder;