Contractor Security Clearance Customers may designate certain duties and/or positions as positions of “special trust” because they involve special trust responsibilities, are located in sensitive locations, or have key capabilities with access to sensitive or confidential information. The designation of a special trust position or duties is at the sole discretion of the Customer. Contractor or Contractor’s employees and Staff who, in the performance of this Contract, will be assigned to work in positions determined by the Customer to be positions of special trust, may be required to submit to background screening and be approved by the Customer to work on this Contract.
Removal or Replacement of a Lender Anything contained herein to the contrary notwithstanding, in the event that: (a) (i) any Lender (an “Increased Cost Lender”) shall give notice to Borrower that such Lender is an Affected Lender or that such Lender is entitled to receive payments under Section 2.18, 2.19 or 2.20, (ii) the circumstances which have caused such Lender to be an Affected Lender or which entitle such Lender to receive such payments shall remain in effect, and (iii) such Lender shall fail to withdraw such notice within five Business Days after Borrower’s request for such withdrawal; or (b) (i) any Lender shall become a Defaulting Lender, (ii) the Default Period for such Defaulting Lender shall remain in effect, and (iii) such Defaulting Lender shall fail to cure the default as a result of which it has become a Defaulting Lender within five Business Days after Borrower’s request that it cure such default; or (c) in connection with any proposed amendment, modification, termination, waiver or consent with respect to any of the provisions hereof as contemplated by Section 10.5(b), the consent of Requisite Lenders shall have been obtained but the consent of one or more of such other Lenders (each a “Non-Consenting Lender”) whose consent is required shall not have been obtained; then, with respect to each such Increased Cost Lender, Defaulting Lender or Non-Consenting Lender (the “Terminated Lender”), Borrower may, by giving written notice to Administrative Agent and any Terminated Lender of its election to do so, elect to cause such Terminated Lender (and such Terminated Lender hereby irrevocably agrees) to assign its outstanding Loans and its Revolving Commitments, if any, in full to one or more Eligible Assignees (each a “Replacement Lender”) in accordance with the provisions of Section 10.6 and Borrower shall pay the fees, if any, payable thereunder in connection with any such assignment from an Increased Cost Lender, a Non-Consenting Lender or Insolvency Defaulting Lender, and the Funds Defaulting Lender (if not also an Insolvency Defaulting Lender) shall pay the fees, if any, payable thereunder in connection with any such assignment from such Defaulting Lender; provided, (1) on the date of such assignment, the Replacement Lender shall pay to Terminated Lender an amount equal to the sum of (A) an amount equal to the principal of, and all accrued interest on, all outstanding Loans of the Terminated Lender, (B) an amount equal to all unreimbursed drawings that have been funded by such Terminated Lender, together with all then unpaid interest with respect thereto at such time and (C) an amount equal to all accrued, but theretofore unpaid fees owing to such Terminated Lender pursuant to Section 2.11; (2) on the date of such assignment, Borrower shall pay any amounts payable to such Terminated Lender pursuant to Section 2.18(c), 2.19 or 2.20; or otherwise as if it were a prepayment; (3) in the case of any assignment resulting from a claim for compensation under Section 2.19 or payments required to be made under Section 2.20, such assignment will result in a reduction in such compensation or payment and (4) in the event such Terminated Lender is a Non-Consenting Lender, each Replacement Lender shall consent, at the time of such assignment, to each matter in respect of which such Terminated Lender was a Non-Consenting Lender; provided that Borrower may not make such election with respect to any Terminated Lender that is also an Issuing Bank unless, prior to the effectiveness of such election, Borrower shall have caused each outstanding Letter of Credit issued thereby to be cancelled. Upon the prepayment of all amounts owing to any Terminated Lender and the termination of such Terminated Lender’s Revolving Commitments, if any, such Terminated Lender shall no longer constitute a “Lender” for purposes hereof; provided that any rights of such Terminated Lender to indemnification hereunder shall survive as to such Terminated Lender. Each Lender agrees that if Borrower exercises its option hereunder to cause an assignment by such Lender as a Terminated Lender, such Lender shall, promptly after receipt of written notice of such election, execute and deliver all documentation necessary to effectuate such assignment in accordance with Section 10.6. In the event that a Terminated Lender does not comply with the requirements of the immediately preceding sentence within one Business Day after receipt of such notice, each Lender hereby authorizes and directs the Administrative Agent to execute and deliver such documentation as may be required to give effect to an assignment in accordance with Section 10.6 on behalf of such Terminated Lender and any such documentation so executed by the Administrative Agent shall be effective for purposes of documenting an assignment pursuant to Section 10.6.
Valid First or Second Lien The Mortgage is a valid, subsisting, enforceable and perfected, first lien (with respect to a First Lien Loan) or second lien (with respect to a Second Lien Loan) on the Mortgaged Property, including all buildings and improvements on the Mortgaged Property and all installations and mechanical, electrical, plumbing, heating and air conditioning systems located in or annexed to such buildings, and all additions, alterations and replacements made at any time with respect to the foregoing. The lien of the Mortgage is subject only to:
Removal or Replacement of a Manager Any Manager may be removed or replaced without “Cause” at any time by a majority of the Board and each Manager may be removed and or replaced and our Board can be reconstituted for any reason by the Class C Member, if any.
Information Security Program (1) DTI shall implement and maintain a comprehensive written information security program applicable to the Personal Information ("Information Security Program") which shall include commercially reasonable measures, including, as appropriate, policies and procedures and technical, physical, and administrative safeguards that are consistent with industry standards, providing for (i) the security and confidentiality of the Personal Information, (ii) protection of the Personal Information against reasonably foreseeable threats or hazards to the security or integrity of the Personal Information, (iii) protection against unauthorized access to or use of or loss or theft of the Personal Information, and (iv) appropriate disposal of the Personal Information. Without limiting the generality of the foregoing, the Information Security Program shall provide for (i) continual assessment and re-assessment of the risks to the security of Personal Information acquired or maintained by DTI and its agents, contractors and subcontractors in connection with the Services, including but not limited to (A) identification of internal and external threats that could result in unauthorized disclosure, alteration or destruction of Personal Information and systems used by DTI and its agents, contractors and subcontractors, (B) assessment of the likelihood and potential damage of such threats, taking into account the sensitivity of such Personal Information, and (C) assessment of the sufficiency of policies, procedures, information systems of DTI and its agents, contractors and subcontractors, and other arrangements in place, to control risks; and (ii) appropriate protection against such risks.
Technical and Organisational Measures (1) Before the commencement of processing, the Supplier shall document the execution of the necessary Technical and Organisational Measures, set out in advance of the awarding of the Order or Contract, specifically with regard to the detailed execution of the contract, and shall present these documented measures to the Client for inspection. Upon acceptance by the Client, the documented measures become the foundation of the contract. Insofar as the inspection/audit by the Client shows the need for amendments, such amendments shall be implemented by mutual agreement.
Security Protocols Both parties agree to maintain security protocols that meet industry standards in the transfer or transmission of any data, including ensuring that data may only be viewed or accessed by parties legally allowed to do so. Provider shall maintain all data obtained or generated pursuant to the Service Agreement in a secure digital environment and not copy, reproduce, or transmit data obtained pursuant to the Service Agreement, except as necessary to fulfill the purpose of data requests by LEA.
Security for Secured Obligations This Patent Security Agreement and the Security Interest created hereby secures the payment and performance of the Secured Obligations, whether now existing or arising hereafter. Without limiting the generality of the foregoing, this Patent Security Agreement secures the payment of all amounts which constitute part of the Secured Obligations and would be owed by Grantors, or any of them, to Agent, the other members of the Lender Group, the Bank Product Providers or any of them, whether or not they are unenforceable or not allowable due to the existence of an Insolvency Proceeding involving any Grantor.
Table C - Receiving Organisation Enterprise The Receiving Organisation/Enterprise will provide financial support to the trainee for the traineeship: Yes ☐ No ☐ If yes, amount (EUR/month): ……….. The Receiving Organisation/Enterprise will provide a contribution in kind to the trainee for the traineeship: Yes ☐ No ☐ If yes, please specify: …. The Receiving Organisation/Enterprise will provide an accident insurance to the trainee (if not provided by the Sending Institution): Yes ☐ No ☐ The accident insurance covers: - accidents during travels made for work purposes: Yes ☐ No ☐ - accidents on the way to work and back from work: Yes ☐ No ☐ The Receiving Organisation/Enterprise will provide a liability insurance to the trainee (if not provided by the Sending Institution): Yes ☐ No ☐ The Receiving Organisation/Enterprise will provide appropriate support and equipment to the trainee. Upon completion of the traineeship, the Organisation/Enterprise undertakes to issue a Traineeship Certificate within 5 weeks after the end of the traineeship. By signing this document, the trainee, the Sending Institution and the Receiving Organisation/Enterprise confirm that they approve the Learning Agreement and that they will comply with all the arrangements agreed by all parties. The trainee and Receiving Organisation/Enterprise will communicate to the Sending Institution any problem or changes regarding the traineeship period. The Sending Institution and the trainee should also commit to what is set out in the Erasmus+ grant agreement. The institution undertakes to respect all the principles of the Erasmus Charter for Higher Education relating to traineeships. Commitment Name Email Position Date Signature Trainee Trainee Responsible person12 at the Sending Institution Supervisor13 at the Receiving Organisation During the Mobility Table A2 - Exceptional Changes to the Traineeship Programme at the Receiving Organisation/Enterprise (to be approved by e-mail or signature by the student, the responsible person in the Sending Institution and the responsible person in the Receiving Organisation/Enterprise) Planned period of the mobility: from [month/year] ……………. till [month/year] ……………. Traineeship title: … Number of working hours per week: … Detailed programme of the traineeship period: Knowledge, skills and competences to be acquired by the end of the traineeship (expected Learning Outcomes): Monitoring plan: Evaluation plan: After the Mobility Table D - Traineeship Certificate by the Receiving Organisation/Enterprise Name of the trainee: Name of the Receiving Organisation/Enterprise: Sector of the Receiving Organisation/Enterprise: Address of the Receiving Organisation/Enterprise [street, city, country, phone, e-mail address], website: Start date and end date of traineeship: from [day/month/year] …………………. to [day/month/year] ……………….. Traineeship title: Detailed programme of the traineeship period including tasks carried out by the trainee: Knowledge, skills (intellectual and practical) and competences acquired (achieved Learning Outcomes): Evaluation of the trainee: Date: Name and signature of the Supervisor at the Receiving Organisation/Enterprise:
Withdrawal or Removal of Partners Section 11.1 Withdrawal of the General Partner.
