Antenna Mounting Sample Clauses

Antenna Mounting. The antenna mast and mounting shall comply towards the following minimum requirements: 2.2.1. The antenna mast should preferably consist of a round aluminium tube 38mm x 1.2mm x 3000mm capable to provide sufficient clearance to allow the antenna to be mounted above the 2.2.2. lowest part of the roof. If practical problems are experienced and there is a need to divert from this type of installation the project manager need to be informed. 2.2.3. A rust-resistant Tripod Wall Bracket (Hot dip, Galvanized) providing minimum distance of 47cm from wall to pole mounting positions shall be used to properly secure the mast with 10mm coach screws and plugs to the outer wall of the building. If there is a requirement to deviate from this type of installation the project manager need to be notified prior to the installer continuing with the installation. 2.2.4. The bracket and antenna pole should be mounted utilizing a water-level to ensure that both the bracket and pole it orientated properly in a vertical position;