Common use of Action & Distribution Clause in Contracts

Action & Distribution. When a Submittal is approved, Contractor may proceed with the Work to which the Submittal pertains. Contractor must promptly distribute copies of the approved Submittals to its Subcontractors, Suppliers, vendors, Fabricators and/or Manufacturers as applicable. Use in Construction Contractor agrees that if a Submittal contains deviations, Contractor shall use only accepted Submittals bearing mark(s) marks indicating acceptance by the Designer of Record in the performance of the construction Work. No portion of Work requiring acceptance of a Submittals shall commence until the Submittal has been accepted. Contractor must Fabricate, construct and furnish all Work in accordance with any accepted Submittals. Contractor must keep at least one (1) copy of each accepted Submittal at the job. Owner’s Review Owner will review Contractor’s submitted Shop Drawings, Product Data, and Samples, but only for the limited purpose of checking for conformance with information provided and the design concept expressed in the authorized Service Work Order. Review of Submittals is not conducted for determining the accuracy and completeness of other details, such as dimensions and quantities, nor for substantiating instructions for installation or performance of equipment or systems, all of which are and remain the responsibility of Contractor.

Action & Distribution. When a Submittal is approved, Contractor may proceed with the Work to which the Submittal pertains. Contractor must promptly distribute copies of the approved Submittals to its Subcontractors, Suppliers, vendors, Fabricators and/or Manufacturers as applicable. Use in Construction Contractor agrees that if a Submittal contains deviations, Contractor shall use only accepted Submittals bearing mark(s▇▇▇▇(s) marks indicating acceptance by the Designer of Record in the performance of the construction Work. No portion of Work requiring acceptance of a Submittals shall commence until the Submittal has been accepted. Contractor must Fabricate, construct and furnish all Work in accordance with any accepted Submittals. Contractor must keep at least one (1) copy of each accepted Submittal at the job. Owner’s Review Owner will review Contractor’s submitted Shop Drawings, Product Data, and Samples, but only for the limited purpose of checking for conformance with information provided and the design concept expressed in the authorized Service Work Order. Review of Submittals is not conducted for determining the accuracy and completeness of other details, such as dimensions and quantities, nor for substantiating instructions for installation or performance of equipment or systems, all of which are and remain the responsibility of Contractor.