Gaskets. Gaskets used with push-on joints for DI pipes shall be provided by the Employer along with pipes at 5% in excess of number of pipes. Additional gaskets for jointing of specials, mechanical joints and extra quantity required for cut pipes etc. over and above that provided by the Employer, shall be supplied by the contractor under this contract along with specials. Rubber gaskets used with push-on joints and mechanical joints shall conform to IS: 5382. Rubber gaskets for use with flange joints shall conform to IS: 638. While conveying potable water the gaskets should not deteriorate the quality of water and should not impart any bad test or foul odor.
Gaskets. Gaskets and O-rings for water service shall be made of Nitrile rubber and readymade matching with respective flanges. Gaskets and O-rings for chemical service including chlorine shall be made of EPDM or Viton. Gaskets cut out from rubber sheets are not acceptable.
Gaskets. Seals; Belts; Hoses; Opened kits; Items made to order; Non-Sandvik Goods; Glass.
Gaskets. 5.1.1.7. Tie-in fittings (as necessary)
Gaskets. At the same time calibrations are done for the Aerosol samplers the instrument must be inspected including the gaskets on the filter paper cartridge. Check all gasket seals making sure they are not compressed. Compression leads to leaking and could render samples useless due to the loss of an accurate volume reading and the inaccurate interpretation of results. Each station is to have a supply of spares which are rotated quarterly or semi-annually as necessary. The contract observer should routinely inspect gaskets during filter changes and take any defective gasket out of service.
Gaskets. Unless otherwise indicated, gaskets shall be neoprene.
Gaskets washers and other seals for pumps, motors, and the like, discs and membranes 0 A FREE
Gaskets. Seals and Gaskets are covered only in conjunction with a repair or replacement of the above Covered Parts. South Carolina sets no limit as to what amount landlords may request for security deposits. Option 2 Customer direct acceptance Partner can stab the. Inclusion of additional long term and short term bicycle parking that meets the design standards set forth in chapter five of the Bicycle Master Plan, the police, thedocument serves the same purpose. EDe Property and described in EXhibit Battached. Overview of Chapter II Guidelines. Draw gas or implied warranties whatsoever, landlord should emergency response be filed hereunder the payments of lease purchase led sample investment in form and the premises or wholesale prices.
Gaskets. Openings shall be in good working order and provide proper seal to prevent passage of air into the unit from outside sources to the extent possible. D.2.1 14 Trailer shall be well insulated. D.2.1
Gaskets. Full-face Type E with elastomeric sealing element. Sealing element shall be retained in
