Transformation time definition

Transformation time means the time difference between a change of concentration or flow (t0) at the reference point and a system response of 50 per cent of the final reading (t50).

Transformation time means the difference in time between the change of the component to be measured at the reference point and a system response of 50 per cent of the final reading (t50) with the sampling probe being defined as the reference point. The transformation time is used for the signal alignment of different measurement instruments.

Transformation time means the time between the change of the component to be measured at the sampling probe and a system response of 50 per cent of the final reading (t50). The transformation time is used for the signal alignment of different measurement instruments;

Examples of Transformation time in a sentence

• Gilardi operationalisierte die Dimensionen formaler Unabhängigkeit auf der Basis von messbaren Einzelindikatoren, die er dann zu einem linearen Index auf einer Skala zwischen 0 (keine Unabhängigkeit) und 1 (maximale Unabhängigkeit) aggregierte.

• In this section, we will present an experiment on our transformation, this transformation which takes as input theFigure 6: Transformation time for the three projects.

• A.5.1.3. Rise time is the difference in time the 10 per cent and 90 per cent response of the final reading (t90 – t10) A.5.1.4. Transformation time is the difference in time between the change of the component to be measured at the reference point and a system response of 50 per cent of the final reading (t50) with the sampling probe being defined as the reference point.

• Transformation time and memory usage shows a stable linear behavior as model size increases.The syntactic transformation performance showed a linear tendency for both transformation time and memory usage.

• Recordings were then transferred to a computer and spectrograms1081were extracted using a Fast Fourier Transformation (time steps = 1000, frequency steps =1082500, Gaussian window shape, window length = 0.05ms and dynamic range = 70dB) in1083PRAAT 5.4.13 (www.praat.org).

• Different Transformation time with different BC size and supersaturation Time, hour Time, hour The transformation time diagnosed in MOZART II.

• The comparison was made to ensure high reproducibility in the measured small currents, since it is in general difficult to compare absolute values of the DC conductivity due to that leakage currents can be inuenced by sample thickness, electrode materials, humidity, protective pressing lm and sample preparation etc.19,33 Ghorbani et al.34 recently demonstrated that, in spite of those challenges, it is possible to obtain reproducible DC conductivity data from thinlm-shaped samples.

• Transformation time relations for random distribution of nuclei, J Phys Chem, 8(2), 212–24, 1940.

• Transformation time for the Appalachian elktoe occurs within 18 to 22 days at a mean temperature of l 8°C.

• II Transformation time relations for random distribution of nuclei,” The J.

More Definitions of Transformation time

Transformation time means the time between the change of the component to be measured at the sampling probe and a system response of 50 % of the final reading (t50). The transformation time is used for the signal alignment of different measurement instruments;

Transformation time means the time difference between a change of concentration or flow (t0) at the reference point and a system response of 50 per cent of the final reading (t50), as depicted in Figure 2(see Figure 2).

Transformation time means the time difference between a change of concentration at the reference point and a system response of 50 per cent of the final reading." Annex 9A Paragraph 2.4.1., amend to read:

Transformation time means the difference in time between the change of the component to be measured at the reference point and a system response of 50 per cent of the final read- ing (t50) with the sampling probe being defined as the reference point. See Figure 1;

Transformation time means the time between the change of the component to be measured at the sampling probe and a system response of 50 per cent of

Transformation time means the time difference between a change of...