thickness of a projecting sign means the horizontal dimension of such sign measured parallel to the plane of the main wall to which such sign is affixed.
thickness means the horizontal dimension measured through a sign at right angles to the length.
thickness means the measurement of all the visible natural resource, including any thinner resource beds seen above or below the main bed that comprise part of what is generally understood to be a logical mining unit. The thickness used in calculating the annual acres mined are set forth in Section 4 of this rule.
Examples of thickness in a sentence
Thickness of laminates to be used shall be 1 mm except where specified.
Glove Thickness: For general applications, we recommend gloves with a thickness typically greater than 0.35 mm.
Thickness = 1 Inch L = 100 LF L= Length of Edge Key 1-3309 Edge key by Ton 01/02//2012 SPECIAL NOTE FOR ASPHALT MILLING AND TEXTURING Begin paving operations within 48 hours of commencement of the milling operation.
Thickness of Wall: Brick walls upto and including three bricks in thickness shall be measured in multiples of half-brick which shall be deemed to be inclusive of the mortar joints.
Dry Film Thickness Testing: Owner may engage the services of a qualified testing and inspecting agency to inspect and test paint for dry film thickness.
More Definitions of thickness
thickness. Not to exceed 2'-0" EXHIBIT F-1 Content: -------- o Galleria North logotype o Street Address o Approximately one half of the sign will contain the Tower I building name and not more than four tenant names. o Approximately one half of the sign will contain the Tower II building name and not more than four tenant names.
thickness. Not to exceed 2'-0" Content: -------- The first (top) line of each sign shall be the building name. With respect to the building name, the size, location on the sign, color, font and method of lighting will be prescribed by the graphics consultant and will be identical for all monument signs. Building names are as follows:
thickness means the greatest thickness at any point and is measured from the inner to the outer part of the midrib.
thickness means that institutions promote growth and provide numerous pathways to development (Amin and Thrift, 1995) as cited in Beer and Lester (2015).
thickness means the dimension as measured from the front edge to the back edge of a die; and
thickness means the greatest distance between outer surfaces of any two (2) faces of a sign exposed to public view.
thickness. Not to exceed 2'0" Method of Illumination Monument signage will be designed to be visible at night. Acceptable metods of illumination are (a) ground mounted flood light(s) in front of the sign, or (b) back lit translucent plastic letters cut as stencils within a metal panel background, or (c) raised solid letters back lit with concealed neon, or (d) some combination of (a), (b) or (c). Complex Monument Sign Size