Pavement width means the portion of a street available for vehicular traffic; where curbs are laid, it is the portion between the faces of the curbs.
Pavement width means the actual paved surface measured between faces of curbs of streets or from edge to edge of alley road surface. (Ord. 3428 § 22, 2008).
Pavement width means the paved surface, including paved shoulder on shoulder-type roads, or paved surface between curb, thickened edge, or gutter flow line.
Examples of Pavement width in a sentence
Pavement width includes, bike lane, street parking, travel lanes and median.
Pavement width beyond the end of the island shall be tapered at a rate of 8:1 to the typical pavement width.
Pavement width design shall be in accordance with most current AASHTO Policy on Geometric Design of Highways and Streets standards for WB-40 vehicles.
Pavement width shall be sufficient to serve the projected traffic on and use of the street, but in no way shall the pavement width be less than that required in Table 5.1 (Design Standards Chart).
Pavement width should be adequate for anticipated traffic movements and future capacity requirements.
More Definitions of Pavement width
Pavement width means the portion of the surface of a street available for vehicular traffic. Where curbs are laid, “pavement width” shall be measured from back of curb to back of curb. In the absence of curbs, it is that portion of vehicular improvements.
Pavement width means a paved area or paved surface between curb, or gutter flow line roads as depicted on Drawings No. MV-1-001 through MV-1-011.
Pavement width means the portion of a street available for vehicular traffic and which is specified in Appendix 9: County Details and Specifications for various right-of-way widths.
Pavement width means the width of the paved surface measured from the outer edges of that surface, or in the case of a curbed surface, measured from the back of the curb to the back of the opposite curb.
Pavement width means paved area on shoulder type roads or paved surface between curb, thickened edge or gutter flow line; on all other roads as depicted on drawings contained in the Pacific County road standards.
Pavement width. MEANS THE SURFACED PORTION OF THE STREET CROSS- SECTION AS MEASURED PER FIGURES 16-1, 16-2, 16-3, AND 16-4.
Pavement width means the surfaced portion of the street cross-section as measured from outside to outside of opposite curbs, or the total surfaced width of those streets not requiring curbs. the surfaced portion of the street cross-section as measured per figures 16-1, 16-2, 16-3, and 16-4.