Nominal Energy definition

Nominal Energy herein means the initially rated capacity of the Products as printed on the label of the Products. The precondition of the valid 10year Performance Warranty shall be as follows:

Split View

AI-Powered Contracts

Draft, Review & Redline at the Speed of AI

Get StartedBook a Demo

Nominal Energy herein means the initially Nominal Energy of the products as printed on the label of Products. The precondition of the valid 10 year Performance Warranty shall be followed as the Products should be used in accordance with Appendix 1 - Usage and Transportation requirements. Product Type Nominal Energy (kWh) Minimum Energy Throughput (MWh) UE-48Li2500I 2.4 6.7 UE-48Li3750I 3.6 10.05

Nominal Energy herein means the initially Nominal Energy of the products as printed on the label of Products. The precondition of the valid 10year Performance Warranty shall be followed as the Products should be used in accordance with Appendix 1 - Usage and Transportation requirements. B4850 ESS unit 2.4 kWh 6.70MWh B3 ESS unit 3.6kWh 10.05MWh Powerbox F2.5 ESS unit 2.4kWh 6.70MWh Powerbox F5.0 unit 4.8kWh 13.40MWh Powerbox F7.5 unit 7.2kWh 20.10MWh Powerbox F10.0 unit 9.6kWh 26.80MWh Powerbox Pro 10.24kWh 28.59MWh PowerDepot H5 4.8kWh 6.70MWh PowerDepot H5B 5.12kWh 14.29MWh

Examples of Nominal Energy in a sentence

• Subject to the terms and conditions of this Limited Warranty, Q CELLS warrants to the Customer that Q CELLS Product conforms with Technical Specification and the User Manual provided by Q CELLS and Q CELLS warrants, for (10) years from the Warranty Start Date or when its energy throughput of Product reaches “A” MWh, whichever comes earlier, that Product maintains at least “B”% of Nominal Energy (“Performance Warranty”).

• Subject to the terms and conditions of this Limited Warranty, Q CELLS warrants to the Customer that Q CELLS Product conforms with Technical Specification and the User Manual provided by Q CELLS and Q CELLS warrants, for (10) years from the date specified in Clause 2 of this Limited Warranty or when its energy throughput of Product reaches “A” MWh, whichever comes earlier, that Product maintains at least “B”% of Nominal Energy (“Performance Warranty”).

• Minimum Capacity means at least 7 0% of the Nominal Energy during the Warranty Period.

• Dyness warrants that the Products retains seventy percent (70%) of the Nominal Energy for ten (10) years from the Invoice Date.

• Payment of the liquidated damages set forth in Exhibit B and Exhibit I shall, without duplication, constitute the sole and exclusive remedy of Buyer and the sole and exclusive liability and measure of damages of Supplier with respect to the failure of the Wind Turbines to maintain the Nominal Energy Output or achieve the Sound Level Performance Standard.

More Definitions of Nominal Energy

Nominal Energy herein means the initially rated capacity of the NV14 (14.4 kWh) and/or NV24 (24.0 kWh). The warranty is contingent on the following:

Nominal Energy means the nominal rated watt-hour (“Wh”) energy published for the Battery in Discover technical documentation at the time of manufacture.

Nominal Energy herein means the initially Nominal Energy of the products as printed on the label of Products. The precondition of the valid 10year Performance Warranty shall be followed as the Products should be used in accordance with Appendix 1 - Usage and Transportation requirements. B4850 ESS unit 2.4kWh 6.70MWh B3 ESS unit (B3 ESS unit has 3 kinds of specifications, please match according to product nameplate) 3.36kWh 9.38MWh 3.55kWh 9.91MWh 3.60kWh 10.05MWh C24100 ESS unit 2.56kWh 7.15MWh The corresponding Minimum Energy Throughput of the Dyness Powerbox, Powercube System is that the corresponding Energy Throughput of the matched battery module in the above table times the total number of modules. Examples are as follows： For POWERBOX F-10, hypothesis it matches with 4 pcs B4850 ESS unit, it’s Minimum Energy Throughput calculated as follows:

Nominal Energy means the initial nominal capacity of the products which is also reported on the label, at the minimum tolerance value, on the label of products according to EU standards. The conditions necessary to maintain the safest condition of the battery are: • The room temperature should not fall below (-10) ℃ or exceed (45) ℃. • Products must not be charged below (-7) ℃. • Coefficient of charge between (0) ℃ and (15) ℃ must not exceed 0.2 ℃. • Coefficient of charge between (15) ℃ and (45) ℃ must not exceed 1 C. The BMU will interrupt the discharge process at -20 ° C, as the battery can operate in discharge up to this threshold even though the use outside the ranges indicated at the upper points is beyond this specific guarantee for indoor domestic use. Uses in environments with temperatures below -10 ° C are to be understood as excluded from this performance guarantee. The standard operating temperature to ensure optimum performance must be within 25 ° C +/- 5 ° C. Codice Etichetta Batteria Capacità ( +/- 3% ) Voltaggio Vdc HeSU 5k3 5,3 kWh 48 (45,3-58.4) Cut off 42 • STC room temperature: 20 ~ 30 ℃ (yearly) • Initial battery temperature from BMS: 20 ~ 30 ℃ • Charge: (0.2) CC / CV (constant voltage (58.8) V • Interruption current (0.05) C • Discharge: (0.5) CC (extreme interruption voltage 43.8 V) Measurement of current and voltage on the DC side of the battery.

Nominal Energy herein means the initially Nominal Energy of the products as printed on the label of Products. The precondition of the valid 10-year Performance Warranty shall be followed as the Products should be used in accordance with Appendix M-2.4 module 2.4kWh 6.70MWh The corresponding Minimum Energy Throughput of the BPE PowerDepot System is that the corresponding Energy Throughput of the matched battery module in the above table times the total number of modules. Examples are as follows: For PowerDepot H10, hypothesis it matches with 4 pcs M-2.4 module, it’s Minimum Energy Throughput calculated as follows:

Nominal Energy herein means the initially Nominal Energy of the products as printed on the label of Products. The precondition of the valid 10year Performance Warranty shall be followed as the Products should be used in accordance with Appendix 1 - Usage and Transportation requirements. Product Type Nominal Energy (kWh) Minimum Energy Throughput (MWh) B4850 ESS unit 2.4 6.70 B3 ESS unit (B3 ESS unit has 3 kinds of specifications, please match according to product nameplate) 3.36 9.38 3.55 9.91 3.60 10.05 B48100 4.8 13.40 B51100 5.12 14.29 PowerDepot H5 4.8 13.40 PowerDepot H5B 5.12 14.29 A48100 4.8 13.40 The corresponding Minimum Energy Throughput of the Dyness Powerbox, Powercube System is that the corresponding Energy Throughput of the matched battery module in the above table times the total number of modules. Examples are as follows： For POWERBOX F-10, hypothesis it matches with 4 pcs B4850 ESS unit, its Minimum Energy Throughput calculated as follows:

Nominal Energy herein means the initially rated capacity of the Subject of the Warranty as printed on the label of the Subject of the Warranty. The precondition of the valid Performance Warranty shall be as follows: