Floor Covering means the planning or measuring or cutting or laying of all floor covering materials.
Floor Covering means any surface used to cover the basic floor or sub flooring construction, including carpet, vinyl, tile, laminate and hardwood.
Floor Covering means any surface used to cover the basic floor or subflooring construction, including carpet, vinyl, tile, laminate and hardwood.
Examples of Floor Covering in a sentence
Standard Test Method for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source.
Installer Qualifications: An experienced installer who is certified by the Floor Covering Installation Board or who can demonstrate compliance with its certification program requirements.
Remove resilient floor coverings and adhesive according to recommendations of the Resilient Floor Covering Institute's (RFCI) "Recommended Work Practices for the Removal of Resilient Floor Coverings" and Addendum.
Standard Specification for Rubber Sheet Floor Covering Without Backing.
Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials.
More Definitions of Floor Covering
Floor Covering. If broadloom carpet, Mohawk Xxxxxxx Cross Knit or equivalent or better; if carpet tile, Mohawk Xxxxxxx Headstrong or equivalent or better. Sheet vinyl if used is Xxxxxxxxx Medintech with welded seams, or equivalent or better. Rubber base Flexco or equivalent or better at least 4” continuous flat at carpet; Flexco or equivalent or better at least 4” continuous coved at resilient flooring and at sealed concrete floors. Floors may be left as sealed polished concrete; no carpet, sheet vinyl, or other covering is required. Standard floor finishes exclude quarry or ceramic tiles, wood flooring, raised computer floors, anti-static flooring, and other special floor finishes. PAINTING AND WALL COVERING: Tenant shall have the right to paint the walls in the Premises with colors of Tenant’s choosing and to finish the walls in the Premises with non-paint finishes of Tenant’s choosing, subject to approval as part of the Tenant Improvements.
Floor Covering. A sealant shall be used in body to floor corners to provide a water resistant seal as an aid in floor cleaning. Ramp area, interior floor, and lower walls shall be seamless gray sprayed-in Poly Urea coating for durability and allow the floor to be easily cleaned. The cab floor shall have the OEM insulated floor covering. A white standee line shall be included at the forward area of the passenger compartment. The entry steps to include a white step nosing covering the leading edge of the step riser. Combination Roof Ventilator/Emergency Exit: A non-closing, static exhaust vent shall be included on the roof hatch. The combination ventilator-emergency escape hatch, with the dimensions of 24” x 24” inches, shall be installed in the vehicle roof. When the hatch is open and the vehicle is in a forward motion, fresh air enters inside the vehicle.
Floor Covering. A. Carpet is to be selected from building standard samples. Allowance is based on $1 5.00 per square yard installed, including base.
Floor Covering. All floor covering shall be installed by the Tenant. Acoustical Ceiling Tile (ACT) All ACT shall be installed by the Tenant. Doors: All interior doors shall be installed by the Tenant.
Floor Covering. The floor surface shall be covered with wall-to wall, slip-resistant, minimum 2.7 millimeter Altro Chroma or approved equal color to be specified by buyer. All step edges shall have Altro T36T Aluminum Step edge (or equal) with band of 2 ½ inch of bright yellow Altro inserted into the step edge using contact adhesive (described below) running the full width of each step. An aisle width standee line of at least two (2") in width of bright yellow contrasting color shall be in the aisle just behind stepwell. Flooring to be installed using manufacturers instructions using proper tools and adhesives. Alternative flooring selections may be proposed as priced options on a separate attachment to be approved by CITY. All corners to be cut and welded (sealed properly as per flooring supplier instructions). No flooring to be rounded or molded to uneven parts of subfloor. All step track nosing should include rivets or sheet metal screws along with approved gluing to insure strips do not lift from wear.
Floor Covering. Modular or broadloom carpet as selected by Landlord and Tenant. VCT Xxxxxxxxx Excelon 12”x12”xl/8” or similar. Sheet vinyl Mannington Commercial, fine fields with welded seams, or similar. Rubber base Xxxxx Xxxxxx or similar 4” continuous coved base at carpet and resilient flooring; Xxxxx Xxxxxx or similar 6” continuous coved base at toilet rooms. Standard floor finishes exclude quarry or cerainic tiles, wood flooring, raised computer floors, anti-static flooring, and other special floor finishes. PAINTING AND WALL COVERING: Colors and finishes as selected by Landlord and Tenant. Gypsum board painted with primer and two coats of satin latex paint. Vinyl, fabric, and other special wall coverings are non-standard items. WINDOW COVERINGS: Horizontal mini-blinds, Levelor Riviera or similar, color as selected by Landlord. Window coverings on doors and interior glass systems are non- standard items.
Floor Covering. Carpet: Textured Loop, 26 oz per square yard face weight, solution dyed yarn, 1/10" gauge, 10 stitches per inch., 0.132 inches pile thickness, 6,591 oz per cubic yard, polypropylene primary backing, and 'ActionBac' secondary backing.