Field Service definition

Field Service means installation, inspection, servicing, reconditioning, start-up, alteration, repair, replacement, or correction of Equipment, or a part thereof, or assistance and supervision with respect thereto, as better defined in the work sheet to be filled in and signed every day after such service has been performed by Seller or weekly as agreed between the Parties;
Field Service. If field service at the request of the purchaser is rendered and the difficulty is found not to be with TIE DOWN's product, the purchaser shall pay the time and expense (at the prevailing rate at the time of service) of seller's field representative(s). Charges for service, labor and other expenses that have been incurred by the purchaser, its customer or agent without prior written authorization of TIE DOWN will not be accepted. TIE DOWN EXTENDS NO WARRANTY, EXPRESS OR IMPLIED, ON PRODUCTS NOT MANUFACTURED BY TIE DOWN OR TO TIE DOWN'S DESIGN SPECIFICATION, INCLUDING BUT NOT LIMITED TO SUCH ITEMS AS NON-TIE DOWN TIRES, BRAKES, ACTUATORS, BEARINGS, HOSE AND TUBING. PURCHASER'S RECOURSE SHALL BE LIMITED TO ANY WARRANTY OF THE RESPECTIVE MANUFACTURERS. THIS WARRANTY EXCLUDES ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY PURPOSE. THIS WARRANTY DOES NOT COVER NOR EXTEND TO INCIDENTAL OR CONSEQUENTIAL DAMAGE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. No representative has authority to make any representation, promise or agreement except as stated in this Limited Warranty. TIE DOWN reserves the right to make design and other changes upon its products without any obligation to install the same on any previously sold or delivered products. DUE TO THE WIDE VARIATION IN USES TO WHICH TIE DOWN PRODUCTS (WHEELS, HUBS, BRAKES, ETC.) ARE SUBJECTED BY USERS, WE ARE UNABLE TO SPECIFY CARRYING CAPACITIES OR SPEEDS FOR A PARTICULAR APPLICATION. THEREFORE, THE MANUFACTURER MUST TEST HIS EQUIPMENT UNDER THE MOST SEVERE CONDITIONS TO DETERMINE THAT TIE DOWN PRODUCTS ARE SUITABLE. C571; 1-11-17 THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THOSE DESCRIBED ABOVE. EFFECTIVE JANUARY 2016 THIS WARRANTY SUPERSEDES ALL PRIOR WARRANTIES, WRITTEN OR IMPLIED. Part #08202 TIE DOWN ENGINEERING • Atlanta, GA 30336
Field Service. Any applicable field service, technical support, installation supervision, or related service shall be governed by a separate written agreement. Back Orders: Seller reserves the right to cancel back orders. Return of Products: Written authorization is required from Seller prior to any return shipment, which may be granted or denied by Seller in its sole discretion. In certain circumstance no more than ten percent (10%) of any one item may be eligible for return. Custom colors, special orders, or limited-shelf-life materials are not returnable. Likewise, excess product due to Buyer’s overestimate of requirements or need is not subject to return. The acceptance and fees associated with all U.S. returns will be based upon the Seller’s Returned Goods Authorization, as amended from time and which can be accessed at xxxxx://xxx.xxxxxxxxx.xxx/about/policies/rga-usa-policy/ and is incorporated herein by reference. Non-U.S. returns may have additional terms and conditions as designated by Seller. In the event any terms or conditions of any authorization conflict with these Terms and Conditions, the Seller’s returned goods authorization shall prevail. Authorized returns must be shipped using the carrier selected by Seller and routed to the location of Seller’s choice. Xxxxx is responsible for all freight charges. Returns must be shipped in their original unopened cartons Claims: Claims resulting from losses, shortages or damage in transit must be acknowledged on the delivery papers at receipt. Buyer shall further promptly notify Seller of any delivery of any damaged product(s) purchased from Seller, or of any complaint whatsoever Buyer may have concerning delivery. Xxxxx’s failure to give such notice and to note such damage constitutes a waiver of any claim against Seller relating to the damaged product. Any claim for any other cause not specifically set forth in these Terms and Conditions shall be deemed waived and released by Xxxxx unless made in writing within five (5) business days after Xxxxx’s receipt of the product(s).

Examples of Field Service in a sentence

  • Manufacturer’s Field Service: Engage factory authorized service representatives to inspect components, assemblies, and equipment installations, including connections, and to assist in testing.

  • May have knowledge about Charter agreements concerning the Church.6136 Rose TerracePlantation, FL 33317 Josh Christ (South Florida Council Director of Field Service) c/o the South Florida CouncilKnowledge of his contacts with the family of the decedent prior to the suit, primarily as it relates to helping arrange a tribute to Michael Sclawy-Adelman.

  • In FY 2014, the 73 Field Service VSOs helped Illinois veterans to obtain more than $127.4 million in initial and retroactive claims from the USDVA, with an operating budget $5.1 million.

  • Indicate if the defect was corrected and if so, indicate if repair action should have been accom- plished at unit by unit, at unit by Depot Field Team (DFT), returned to Depot for repair, or at unit by Manufactures’ Field Service Team.

  • The ADM is provided on a separate software disk and is installed by qualified Field Service Engineers (FSEs).

  • Board/District Goals- NJSBA Field Service Reprehensive, Mary Ann Friedman.

  • In any event, the Field Service Superintendent or Field Service Supervisor always follow-up by phone to make sure the customer is satisfied.

  • The approved staffing establishment of the Civil Affairs Section consists of 17 posts (1 P-5, 2 P-4, 1 P-3, 1 Field Service, 4 National Professional Officer and 8 national General Service).

  • Presented at the 3rd joint meeting of the International Gravity Field Service and Commission 2 of the International Association of Geodesy “Gravity Geoid and Height Systems 2022” – GGHS2022, Conference, September 12-14, Austin TX, USA.Natsiopoulos DA, Mamagiannou E, Tzanou EA, Triantafyllou A, Vergos GS, Tziavos IN, Ramnalis D, Polychronos V (2022) GeoNetGNSS, a newly established CORS network in Northern Greece in support of high- accuracy positioning applications.

  • Field Service Representative and Supervision to Support ISW and HAT of the Improved Galley.


More Definitions of Field Service

Field Service. We have an in-house technician available to field-service cafeteria tables should the need arise. This is a complimentary service offered to our customers if the need arises.
Field Service means installation, inspection, servicing, alteration, replacement, or correction of Equipment, or a part thereof, or assistance with respect thereto, as better defined in the Field Service Report to be filled in and signed every day after service has been performed by Seller and Time Sheet to be filled in and signed weekly.(Attachment 1.1; Attachment 1.2).
Field Service means any one or combination of professional or administrative services provided by Xxxxxxx employees, consultants, contractors or agents and other persons expressly permitted by Xxxxxxx in connection with a Service provided under this Agreement for Customer including but not limited to Activation, on-site implementation, Maintenance Services, training, set-up of Services, consulting, advisory, or any other similar services.
Field Service means maintenance services provided by Leica Geosystems for its Solutions at the customer’s site.
Field Service means work that is predominately performed in the field, which may include maintenance and/or service work at various locations (other than a Business Centre) to provide customer or business support.

Related to Field Service

  • Cloud Service means any distinct, subscription-based, hosted, supported and operated on-demand solution provided by SAP under an Order Form.

  • Food Service means the distribution of prepared foods for consumption, including those food items prepared at the child care center; received by the center from approved food establishments; milk placed in a pitcher or other serving container; ice transported, stored and dispensed; bagged lunches sent from home; and the use of utensils to minimize direct food contact.

  • Gas supply service means the provision to customers of the

  • Basic gas supply service means gas supply service that is

  • Electric generation service means the provision of retail

  • Basic generation service or "BGS" means electric generation

  • Police Service ’ means the South African Police Service established in terms of section 5(1) of the South African Police Service Act;

  • Basic generation service provider or "provider" means a

  • 911 Service means a universal telephone number which gives the public direct access to the Public Safety Answering Point (“PSAP”). Basic 911 service collects 911 calls from one or more local exchange switches that serve a geographic area. The calls are then sent to the correct authority designated to receive such calls.

  • Electric related service means a service that is directly related

  • Transportation Service means a service for moving people and goods, such as intercity bus service and passenger rail service.

  • Water Service means the procurement, treatment, and distribution of water for domestic use or any other purpose for which water can be used.

  • Transit Service means the delivery of Transit Traffic.

  • Cloud Services means SAP’s then-current cloud services offered under and described in detail in the applicable SAP PartnerEdge Model.

  • Gas service means the provision of gas service to customers. The gas provided shall be a service and shall not constitute goods for any purpose. Main and Service Extension Related Terms

  • energy service provider means a natural or legal person who delivers energy services or other energy efficiency improvement measures in a final customer’s facility or premises;