Engineering controls definition

Engineering controls means constructed containment barriers or systems that control one or more of the following: downward migration, infiltration, or seepage of surface runoff or rain; or natural leaching migration of contaminants through the subsurface over time. Examples include caps, engineered bottom barriers, immobilization processes, and vertical barriers.
Engineering controls means mechanisms used to protect health and minimize damage to life and property through engineering specifications, design, and construction of the product or facility including all of the security and safety features. This includes, but is not limited to, auxiliary security and safety features such as additional external shielding, barriers, and operational interlocks with associated processes.
Engineering controls means controls that isolate or remove the blood borne pathogens hazard from the workplace and include sharps with engineered sharps injury protection, needleless devices, and shielded needle devices. Where engineering controls will reduce employee exposure by removing, eliminating or isolating the hazard, they must be used.

Examples of Engineering controls in a sentence

  • Ventilation and Engineering Controls: Use with adequate ventilation to ensure exposure levels are maintainedbelow the limits provided above.The following information on appropriate Personal Protective Equipment is provided to assist employers in complying with OSHA regulations found in 29 CFR Subpart I (beginning at 1910.132) or equivalent standard of Canada, or standards of EU member states (including EN 149 for respiratory PPE, and EN 166 for face/eye protection), and those of Japan.

  • EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls Ensure adequate ventilation, especially in confined areas.

  • Based upon the approved Final Reports (see Section VIII of this Consent Decree) documenting the Work performed pursuant to the ISM Work Plan and https://www.epa.gov/sites/default/files/2016-06/documents/r5-final_0.pdf, and “Guidance for Quality Assurance Project Plans,” available at https://www.epa.gov/sites/default/files/2015-06/documents/g5-final.pdf.Remediation Work Plan, KYDEP will determine if any additional work and/or Institutional Controls or Engineering Controls are required at the Facility.

  • Engineering Controls: The SVE system and site cover discussed above.

  • Such additional work and/or Institutional Controls or Engineering Controls, if any, is not included within the scope of this Consent Decree.VIII.


More Definitions of Engineering controls

Engineering controls means any mechanism to contain or
Engineering controls means any mechanism used to contain or stabilize contamination that ensures the effectiveness of a remedial action and acts as a physical barrier between the contamination and contact with humans or the environment.
Engineering controls means any mechanism to contain or stabilize contamination or ensure the effectiveness of a remedial action. Engineering controls may include, without limitation, caps, covers, dikes, trenches, leachate collection systems, signs, fences and physical access controls;
Engineering controls means an aspect of the built space or a device that removes a hazard from the workplace or creates a barrier between the worker and the hazard. For purposes of reducing workplace violence hazards, engineering controls include, as applicable, but are not limited to: electronic access controls to employee occupied areas; weapon detectors (installed or handheld); enclosed workstations with shatter-resistant glass; deep service counters; separate rooms or areas for high risk patients; locks on doors; furniture affixed to the floor; opaque glass in patient rooms (protects privacy, but allows the health care provider to see where the patient is before entering the room); closed-circuit television monitoring and video recording; sight-aids; and personal alarm devices.
Engineering controls means any physical mechanism defined as such pursuant to the Technical Requirements for Site Remediation, N.J.A.C. 7:26E.
Engineering controls or “ECs” means physical controls
Engineering controls means physical modifications to a site to reduce or eliminate the potential for exposure to chemicals of concern.