Anchoring means the evolution of maneuvers made to approach and anchor a vessel in an anchorage, beginning with the briefing of the maneuver to the training pilot and ending when the anchor is set and the scope of chain deployed;
Anchoring means securing a vessel temporarily to the bottom of the water column by dropping an anchor or other ground tackle from that vessel.
Anchoring means the holding of a vessel solely by means of an anchor which is dropped to underwater lands and which is carried aboard the vessel.
Examples of Anchoring in a sentence
Anchoring the mulch with netting, peg and twine or other suitable method may be required to maintain the mulch cover.
Anchoring through the vertical portion of the curb cap flange is recommended.
Fasteners for Anchoring Railings to Other Construction: Select fasteners of type, grade, and class required to produce connections suitable for anchoring railings to other types of construction indicated and capable of withstanding design loads.
Anchoring methods may include, but are not limited to, use of over-the-top or frame ties to ground anchors.
Ground Anchoring PermitThis permit must be applied for, for the installation of ground anchors under Council’s footway/road reserve.
More Definitions of Anchoring
Anchoring when a Tug service rendered to assist a Vessel as above commences or terminates with Tugs assisting alongside at a designated anchorage.
Anchoring means the securing of any RENTAL as required by the MANUFACTURER or [POLICY-SOP]. While AEG may install ANCHORING devices for RENTER, the RENTER shall provide unobstructed anchor THIS POLICY IS PART OF AND ATTACHED TO THE EO BETWEEN THE PARTIES and shall be in addition to and not in lieu of any other terms or conditions. Definitions herein are as provided by the T/C’s. locations suitable for the type of anchors contracted and shall MAINTAIN all such devices to assure they are and remain suitable for the anchoring load and task required. Straps connecting to ANCHORING devices are not be installed at more than a 45o angle (or more than 8-ft away from an 8-ft tall item). Anchoring shall be on BEST EFFORTS basis only and solely dependent upon RENTER’s provision of suitable locations. RENTER indemnifies AEG from all costs, damage and loss due to anchoring or its failure.
Anchoring means securing a vessel to the bottom of the water column by dropping an anchor or other ground tackle from that vessel for a period of time not to exceed 14 days; not a mooring.
Anchoring means the securing of any RENTAL as required by the MANUFACTURER and/or [POLICY-SOP]. While AEG may install ANCHORING devices for USER, the USER shall provide unobstructed anchor locations suitable for the type of anchors contracted and shall MAINTAIN all such devices to assure they are and remain suitable for the anchoring load and task required. Straps connecting to ANCHORING devices are not be installed at more than a 45o angle (or more than 8-ft away from an 8-ft tall item). Anchoring shall be on BEST EFFORTS basis only and solely dependent upon USER’s provision of suitable locations. USER indemnifies AEG from all costs, damage and loss due to anchoring or its failure.
Anchoring. Means to secure a vessel temporarily to the bottom of a waterbody by dropping an anchor or anchors or other ground tackle from a vessel.
Anchoring means the set of operations to ensure the tightness of the nautical units to the seabed, carried out exclusively by anchoring the anchor.
Anchoring means that the various edges of the control are virtually (not actually) bound to part of the container. For example, if a control is anchored to the right edge of the form (cAnchor contains “R”), as the form is widened, the control will move to the right. If cAnchor is set to “LR”, the control won’t move since its left edge is bound to the left edge of the container but will instead become wider because its right edge is bound to the right edge of the container. You can use various combinations of anchor settings to achieve the desired result. For example, “LRTB” means the object will grow horizontally and vertically as the container is resized. Use “V” and “H” when you want an object to be centered (for example, “BV” will keep OK and Cancel buttons centered at the bottom of a form) or for objects that need to be resized that sit beside other objects that are also resized.