Thermostats. Lessor shall provide and install 7-day digital, programmable thermostats, type VisionPRO 8000, as manufactured by Honeywell International, Inc., or approved equal. Model of thermostat to be that which is most compatible with HVAC equipment. Location of control(s) shall be as determined by the landlord’s engineer, and as approved by the PLCB. There shall be one thermostat per HVAC unit.
Thermostats. Thermostats are to be mercury bulb, Honeywell Tradeline, #Y594G-1252 multistage heat pump thermostats.
Thermostats. Thermostats shall be mounted in the vacinity of the air return inlets and should be installed in such a way to minimize unauthorized tampering with the temperature setting controls. A lock box cover on a conventional thermostat may be required if unauthorized temperature resetting is anticipated. Normal Set-Points and Sensitivities: Temperature: Relative Humidity (RH): Minimum RH: 35%, +5% - Maximum RH: 50%, +5% -
Thermostats. 17.1 Please leave your thermostat settings within a normal comfortable range.
Thermostats. Thermostats shall be provided for each zone. Honeywell Pneumatic, Model TP970A, 2004 Direct Acting, Range 60° ☐to 90°, Color White
Thermostats. AAPC requests that the Client leave thermostat settings within a normal comfortable range. If the house temperature is outside of a comfortable range, AAPC will adjust the thermostat.
Thermostats. Thermostats shall be provided for each zone per btilding standard type and color. NOTE: - If Pneumatic controls are building standard use Honeywell Pneumatic, Model TP970A, 2004 Direct Acting, Range 60.10 90°, Color White
Thermostats. Carrier model#MP-10
Thermostats a. Programmable Thermostats: Nicor Gas shall remove programmable thermostats from most residential offerings, including the prescriptive rebate, retail, and single family direct installation offerings. Nicor Gas may continue to include programmable thermostats in the multifamily direct installation and single-family offerings, including moderate income single family and multi- family program offerings, where the customer’s circumstances substantially prevent it from taking advantage of smart thermostat technology.
Thermostats. Honeywell TP970A2145 4 with blank insert installed on cover. Thermostats will be mounted to on the side of the light switch on the opposite side from the door latch, and centered on the switch. SCHEDULE “2” Heating Valve: Heating valves will be Honeywell normally open two-way valve with a 2-5 psi spring range. Contractor will select the proper size and Cv rating for the application. All new or relocated VAV boxes will receive a new heating valve. Heating Water Piping: Piping will be type L copper with wrought copper fittings. Piping will be insulated with one-inch thick molded fiberglass insulation with a vapor barrier. Each VAV will have an individual shut off valves on the supply and return lines placed within 2.5 feet of the heating control valve. There will be a 3/8” vent installed at the highest point on each line and a brass ball valve and pipe plug installed to remove air from the system. SCHEDULE “2” EXHIBIT C
