Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load in American Electric Power Company Control Area as listed in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. The meter owner shall cause to be provided to the Transmission Provider, Network Customer and applicable Transmission Owner, on a monthly basis such data as required by Transmission Provider for billing. The Network Customer’s load shall be adjusted, for settlement purposes, to include applicable Transmission Owner transmission and distribution losses, as applicable, as specified in Sections 8.5 and 8.6, respectively. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly Network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load in the Westar Energy Control Area as defined in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility and at each wholesale customer’s interconnection point on Host Transmission Owner’s transmission system. For billing purposes, the amount of retail load will be defined as the amount of load connected to the Host Transmission Owner’s transmission system, less all load referenced in Appendix 3 of this Service Agreement. Such loads shall be adjusted to system input for transmission and distribution losses. The meter owner shall cause to be provided to the Transmission Provider, Network Customer and applicable Transmission Owner, on a monthly basis such data as required by Transmission Provider for billing. The Network Customer’s load shall be adjusted, for settlement purposes, to include applicable Transmission Owner transmission and distribution losses, as applicable, as specified in Sections 8.5 and 8.6, respectively. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly Network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for the KMEA member cities of Ashland, Beloit, Hoisington, Lincoln, Osborne, Pratt, Xxxxxxx, Stockton and Washington. KMEA’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. If KMEA provides retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with SPP’s standards and practices for similarly determining the loads of SPP, Mid-Kansas and KMEA. The actual hourly network loads, by delivery point, internal generation site and point where power may flow to and from KMEA, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load in American Electric Power Company Control Area as listed in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point and at each generating facility. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load in the Cities of Ashland, Beloit, Hoisington, Lincoln Center, Osborne, Pratt, Russell, Stockton, and Washington, Kansas in the Sunflower Electric Power Corporation Control Area as listed in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. The meter owner shall cause to be provided to the Transmission Provider, Network Customer and applicable Transmission Owner, on a monthly basis such data as required by Transmission Provider for billing. The Network Customer’s load shall be adjusted, for settlement purposes, to include applicable Transmission Owner transmission and distribution losses, as applicable, as specified in Sections 8.5 and 8.6, respectively. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly Network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load in the Southwestern Power Administration Zone(s) as listed in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. The meter owner shall cause to be provided to the Transmission Provider, Network Customer and applicable Transmission Owner, on a monthly basis such data as is required by Transmission Provider for billing. The Network Customer’s load shall be adjusted, for settlement purposes, to include applicable Transmission Owner transmission and distribution losses, as applicable, as specified in Sections 8.5 and 8.6, respectively. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters, may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly Network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network customer loads within the Southwestern Public Service Company control area. Network customer delivery points are at Lubbock, Texas which is a member of the West Texas Municipal Power Agency. Delivery points are listed in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. The meter owner shall cause to be provided to the Transmission Provider, Network Customer and applicable Transmission Owner, on a monthly basis such data as required by Transmission Provider for billing. The Network Customer’s load shall be adjusted, for settlement purposes, to include applicable Transmission Owner transmission and distribution losses, as applicable, as specified in Sections 8.5 and 8.6, respectively. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly Network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load in the Control Area. Network Customer delivery points are as metered at its generation and transmission interconnection points.American Electric Power Company Control Area as listed in Appendix 3. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. and at each generating facility. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for Network Customer load of the City of Hill City, Kansas in the Westar Energy Control Area as listed in Appendix 3. The City of Hill City delivery point is physically located on the Midwest Energy transmission system. The City of Hill City delivery point is dynamically telemetered to and included in the Sunflower Electric Power Corporation's control area. The Network Customer’s Network Load shall be measured on an hourly integrated basis, by suitable metering equipment located at each connection and delivery point, and each generating facility. The meter owner shall cause to be provided to the Transmission Provider, Network Customer and applicable Transmission Owner, on a monthly basis such data as required by Transmission Provider for billing. The Network Customer’s load shall be adjusted, for settlement purposes, to include applicable Transmission Owner transmission and distribution losses, as applicable, as specified in Sections 8.5 and 8.6, respectively. For a Network Customer providing retail electric service pursuant to a state retail access program, profiled demand data, based upon revenue quality non-IDR meters may be substituted for hourly integrated demand data. Measurements taken and all metering equipment shall be in accordance with the Transmission Provider’s standards and practices for similarly determining the Transmission Provider’s load. The actual hourly Network Loads, by delivery point, internal generation site and point where power may flow to and from the Network Customer, with separate readings for each direction of flow, shall be provided.
Network Loads. The Network Load consists of the bundled native load or its equivalent for KPP In the Sunflower Control Area as shown in Appendix 3.
