Liters Sample Clauses

Liters. Extinguishing medium inside extinguishers must be of their respective approved IS specification and of capacity:- AREA Up to 10 Sq. m. Above 10Sq. m. and below 50 Sq. m. Above 50 Sq. m. and below 100 Sq. m. One Fire Extinguisher of 2 KG capacity One Fire extinguisher of 4 KG capacity Two Fire extinguishers, one of 5 KG and another of 9 Liters Water Type The existing shops up to an area of 250 Sq. m. are integrated design part of a Xxxxx Xxxxxxx. In addition to other Fire Safety measures each shop is to be provided with Fire Extinguisher as per Table-2. For Shops of area above 100 Sq. m. and less than 250 Sq. m., fire Extinguishers of capacity 10 KG and another of 18 Liters Water, these should be distributed in at least four units at two places remote to each other. For bigger spaces, Licensee is required to obtain details of recommended suppression and detection system from MAHA-METRO in the beginning. Declaration [For Elevated Stations - On Non Judicial Stamp Paper of Rs. 100/-] duly notarized I , son/daughter/wife of Resident of (hereinafter to as the “Bidder”, which term shall mean and include executors, administrators, heirs, successors and assigns), do hereby swear and declare as under: OR , a company incorporated under the provision of the Companies Xxx 0000, a sole proprietorship, a partnership having its registered office at (hereinafter as “Bidder”, which expression shall unless repugnant to the context or meaning thereof, include its successors and assigns), do hereby swear and declare as under: That the Bidder is an occupant of the premises No. at having taken the premises from MAHA-METRO on the terms and conditions agreed to with MAHA-METRO which include that MAHA-METRO may supply electricity as a part of the lease or license of the premises, based on the commercial arrangement. The Bidder has requested the MAHA-METRO to provide an electricity connection at the above- mentioned premises in the Bidder’s name for the purpose mentioned in the application form. The Bidder hereby agrees and undertakes:
Sample 1Sample 2Sample 3See All (12)
AutoNDA by SimpleDocs
Liters. Extinguishing medium inside extinguishers must be of their respective approved IS specification and of capacity:- AREA Up to 10 Sq. m. Above 10Sq. m. and below 50 Sq. m. Above 50 Sq. m. and below 100 Sq. m. One Fire Extinguisher of 2 KG capacity One Fire extinguisher of 4 KG capacity Two Fire extinguishers, one of 5 KG and another of 9 Liters Water Type The existing shops up to an area of 250 Sq. m. are integrated design part of a Xxxxx Xxxxxxx. In addition to other Fire Safety measures each shop is to be provided with Fire Extinguisher as per Table-2. For Shops of area above 100 Sq. m. and less than 250 Sq. m., fire Extinguishers of capacity 10 KG and another of 18 Liters Water, these should be distributed in at least four units at two places remote to each other. For bigger spaces, Licensee is required to obtain details of recommended suppression and detection system from DMRC in the beginning. For Built-up Shops at Underground metro stations viz. RCK_01, RCK_03 and RCK_05:
Sample 1Sample 2Sample 3See All (4)
Liters. 2.0 HP: 160 Torque:146 STD Keys, Working 2 working keys without fobs DLR $88.00 Estimated Quantity 6 TOTAL PRICE FOR EACH VEHICLE: (Includes Base Vehicle Cost, Options, and Delivery Cost) $14,783.00 Make: FORD $14,695.00 Model Name: FOCUS Revised Bid Price mi Exact Model Code: P3F Trim Pkg. Common Name: SE Exact Trim Pkg. Code: 200A Engine Code: 992 Transmission Code: 44W nus Keys Group F - FULL-SIZE SPECIALITY SEDANS with Automatic Transmission Make: FORD FOUR (4) DOOR SPECIALTY SEDANS OR WAGONS Model Name:APPROVED MAKES: BUICK LUCERNE, DODGE CHARGER R/T, TAURUS SE, CHEVROLET IMPALA . Exact Model Code: Trim Pkg. Common Name: Exact Trim Pkg. Code:DEALER NAME: XXXXXXX FORD Engine Code:Transmission Code: TARUS P2D SE 100A 998 44J BASE VEHICLE SPECIFICATIONS Engine Minimum Requirements Mfg. Codes / STD for standard / NA for not available Engine V8 or V6; highest performance engine / drivetrain package available (no supercharge or turbo package) Cylinders: Liters: HP: Torque: Doors & Windows Doors Power locks with remote keyess entry. STD Key Sets 2 key sets total (key with fob) STD Rear Window Defroster STD Windows Power, all four windows STD Wipers Intermittent Wipers STD Electrical Power Point Located in Driver Area STD Exterior Mirrors Power adjustable STD Floor Floor Covering Full floor carpet covering. OEM floor mats front and back. STD Interior Air Conditioning With all required options STD Bluetooth Dealer installed when factory installed is not available. STD Factory installed?YES Radio Radio, Electronic AM/FM/Stereo; delete satellite radio if not needed for Bluetooth. STD Steering Tilt column with cruise control STD Trim Package Interior trim package w/insulating headliner, full door panels, dome lamp; bucket seats, cloth upholstery STD Safety Air Bags Standard STD Brakes Power 4 Wheel Anti-lock STD Daytime Running Lights 942 Suspension Suspension Package Performance Suspension package, if available must provide NA Tires & Wheels Spare If available must provide Is spare tire available?: YES Is spare tire full size?: NO Wheels Alloy wheels, if available must provide STD THIS IS A MULTIPLE AWARD ITEM BASE VEHICLE PRICE CONFIGURED AS PER ABOVE: $20,162.00 Delivery Cost to Department of Administrative Services, Des Moines $0.00 GROUP F 6.1 TOTAL VEHICLE PRICE INCLUDING BASE COST AND DELIVERY: $20,162.00 Final Bid Price ADDITIONAL OPTIONS Instructions: Bidder should enter the additional cost for the options listed below. If "Deduct Cost" is noted for an o...
Sample 1
Liters. 2.0 HP: 160 Torque:146 STD Engine Block Heater 41H $33.00 Doors & Windows Key Sets, Additional 2 additional Key sets including fobs; 4 total key sets per vehicle DLR $242.00 Keys, Working 2 working keys without fobs DLR $88.00 Windows Glass, tinted; Factory preferred but dealer installed acceptable STD SOLAR $0.00 Interior Bluetooth DELETE NA it is STD DEDUCT COST: $0.00 Driver Seat Power with adjustable lumbar support NA $0.00 Steering Column Tilt/Telescope Steering Column STD $0.00 Upholstery Treated to resist stains DLR $40.00 Safety Rear View Camera Factory installed STD $0.00 Reverse Sensing System Factory preferred but dealer installed acceptable DLR Dealer installed? YES $375.00 OTHER Options not listed above Discount percentage off MSRP for options $1500 or less as specified in the Vehicle Specifications Terms and Conditions document attached to the bid. Engine and powertrain options excluded. Enter Percentage Discount MSRP: 2
Sample 1
Liters. 10 Mineral Water 0.5 Liter 1 12 Bottle Case
Sample 1
Liters. Extinguishing medium inside extinguishers must be of their respective approved IS specification and of capacity:- AREA Up to 10 Sq. m. Above 10Sq. m. and below 50 Sq. m. Above 50 Sq. m. and below 100 Sq. m. One Fire Extinguisher of 2 KG capacity One Fire extinguisher of 4 KG capacity Two Fire extinguishers, one of 5 KG and another of 9 Liters Water Type The existing shops up to an area of 250 Sq. m. are integrated design part of a Xxxxx Xxxxxxx. In addition to other Fire Safety measures each shop is to be provided with Fire Extinguisher as per Table -1. For Shops of area above 100 Sq. m. and less than 250 Sq. m., fire Extinguishers of capacity 10 KG and another of 18 Liters Water, these should be distributed in at least four units at two places remote to each other. For bigger spaces, licensee is required to plan & carry out all fire system works to meet the statutory requirement of DFS at their own cost and got it verified by DMRC. Material Specification for renovation/ refurbish of premises Approved - vendors – list Sl. No. Items/Products Approved Vendors 1 VITRIFIED TILES Kajaria H&R Xxxxxxx (India) Naveen Somany Orient
Sample 1

Related to Liters

  • Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

  • Safety Glasses 10.3.1 Where a teacher is considered to be working in an “eye danger” area, the teacher shall receive a personal issue of standard neutral safety glasses which shall remain the property of the employer.

  • Packages a. CLIENT has purchased one or more of the following packages (the “Package”) as Full Season, Single Game or Bundled Packages from TAILGATE GUYS as reflected in the order placed with TAILGATE GUYS by CLIENT and incorporated herein by reference upon payment therefore:

  • Generators Temporary installation of generators, and permanent installation of generators that are placed inside existing non-residential buildings or that occupy an area under 50 square feet behind the building they serve.

  • Scaling “Scaling,” as used herein, involves:

  • Meters 7.1.1 For installation of Meters, Meter testing, Meter calibration and Meter reading and all matters incidental thereto, the SPD and SECI shall follow and be bound by the Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006, the Grid Code, as amended and revised from time to time.

  • Plant The expression ‘Plant’ as used in the tender papers shall mean every temporary accessory necessary or considered necessary by the Engineer to execute, construct, complete and maintain the work and all altered, modified, substituted and additional works ordered in the time and the manner herein provided and all temporary materials and special and other articles and appliance of every sort kind and description whatsoever intended or used therefore.

  • Fuel 28.1 The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 including GST per litre (which includes a service component).

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.212 – MARKET-RELATED CONTRACT TERM ADDITION (11/08). The term of this contract may be adjusted when a drastic reduction in wood product prices has occurred in accordance with 36 CFR 223.52. The Producer Price Index used to determine when a drastic reduction in price has occurred is stated in A20. Purchaser will be notified whenever the Chief determines that a drastic reduction in wood product prices has occurred. If the drastic reduction criteria specified in 36 CFR 223.52 are met for 2 consecutive calendar quarters, after contract award date, Contracting Officer will add 1 year to the contract term, upon Purchaser’s written request. For each additional consecutive quarter such a drastic reduction occurs, Contracting Officer will, upon written request, add an additional 3 months to the term during Normal Operating Season, except that no single 3-month addition shall extend the term of the contract by more than one year. Contracting Officer must receive Purchaser’s written request for a market-related contract term addition before the expiration of this contract. No more than 3 years shall be added to a contract's term by market-related contract term addition unless the following conditions are met:

  • Samples Physical examples of materials, equipment, or workmanship that are representative of some portion of the Work and that establish the standards by which such portion of the Work will be judged. The Contractor shall furnish for approval all samples required by the Contract Documents. The Work shall be in accordance with approved samples.

Time is Money Join Law Insider Premium to draft better contracts faster.