Heating Value contain a Gross Heating Value of at least nine hundred fifty (950) Btu per cubic foot; and
Heating Value. The term "heating value" shall mean the number of Btus per cubic feet of Gas at the base condition of 14.73 psia 60 degrees Fahrenheit dry. The Btu value will be determined utilizing the complete actual composition of the Gas according to the methods in GPA Standard 2172-96, titled "Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis," and corrected to the base conditions. For reporting purposes, Btu conversion factors will be reported to not less than three (3) decimal places and Pressure Base conversion factors will be reported to not less than six (6) decimal places. For calculation purposes, not less than six (6) decimal places will be used for both conversion factors.
Heating Value. The Committed Gas shall not have a Gross Heating Value of less than 950 Btu per Cubic Foot of gas under the conditions of measurement contained herein. In the event that the quality specifications of any pipeline receiving gas from Processor’s Pipeline System or at the Plant is more stringent than the applicable quality specification set forth in this ITEM 2.1, then notwithstanding any reasonableness standard agreed to by Processor regarding said quality specifications, all Committed Gas delivered by Shipper to Processor shall meet the quality specifications of that pipeline. Notwithstanding anything to the contrary contained in this ITEM TWO, the quality specifications set forth herein shall not apply during the period of time when any Well dedicated herein is being completed/recompleted and is flowing into Processor’s Pipeline System during said completion/recompletion phase; provided, however, for the suspension of the quality specifications set forth herein during the completion/recompletion phase to apply to any Well which has been connected to Processor’s Pipeline System pursuant to this Contract, Shipper shall require the Contracted Parties (as defined in ITEM 4.1) to furnish, install, and maintain, or use their respective reasonable efforts to cause the operator of such Well to furnish, install, and maintain equipment at the well site of such Well (such as a separator) as is reasonably necessary for the removal of the objectionable liquids from such Well, as reasonably determined by such Contracted Parties in their sole discretion.
Heating Value. The quality characteristic or property of the Product measured in Btu per Barrel (Btu/BBL) in accordance with the applicable ASTM Standard and which is the quantity of heat liberated when a unit mass of the fuel is burned in oxygen in an enclosure of constant volume.
Heating Value. The gas delivered shall contain a heating content of not less than nine hundred fifty (950) Btu s per cubic foot. (h)
Heating Value. The minimum gross heating value of the gas delivered to/by Enbridge hereunder, shall be thirty-six point zero (36.0) megajoules per cubic metre. The maximum gross heating value of the gas delivered to/by Enbridge hereunder shall be forty-one point three (41.3) megajoules per cubic metre. The gas to be delivered hereunder to Enbridge may be a commingled supply from Xxxxxxx’s gas sources of supply. The gas to be delivered by Enbridge may be a commingled supply from Enbridge’s sources of gas supply; provided, however, that helium, natural gasoline, butane, propane and other hydrocarbons, except methane, may be removed prior to delivery to Shipper. Further, Enbridge may subject, or permit the subjection of, the gas to compression, dehydration, cooling, cleaning and other processes.
Heating Value. The Committed Gas shall not have a Gross Heating Value of less than 950 Btu per Cubic Foot of gas under the conditions of measurement contained herein. In the event that the quality specifications of any pipeline receiving gas from Processor’s Pipeline System or at the Plant is more stringent than the applicable quality specification set forth in this ITEM 2.1, then notwithstanding any reasonableness standard agreed to TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). by Processor regarding said quality specifications, all Committed Gas delivered by Shipper to Processor shall meet the quality specifications of that pipeline.
Heating Value have a Gross Calorific Value not less than eight hundred fifty (850) BTU per cubic foot and not more than eleven hundred fifty (1,150) BTU per cubic foot.
Heating Value. Refers to the Heating Value of Product as measured in BTU per gallon using ASTM Test designation D-240 as supplemented or amended. Unless mutually agreed by the Parties, the most recent revision of this test will be utilized. August 31, 1995
Heating Value. The gas shall have a gross heating value of not less than nine hundred ninety-five (995) Btus per standard cubic foot on a dry basis, but with the consent of Shipper, GTN may deliver gas at a lower gross heating value.
