Electrical Plans. 5.2.2.3.1 Floor plans, single line and panel schedule.
Electrical Plans. Service and distribution equipment location: Electrical service, transformer, electrical meter and panel location Exit sign locations, light fixtures layout and emergency lighting Electrical outlets and circuits Fire alarm/detection system Light fixture schedule Panelboard circuit schedule/calculations One-line diagram ❑ S. Specifications Describe structural, mechanical and electrical systems Complete specification sections for principal materials and finishes Provide statement of special inspections required
Electrical Plans. For the concept plans the backbone of the electrical system will be shown and conceptual street light locations provided.
Electrical Plans. Plans included are single line diagrams, conduit routing plans, and wire and conduit size tables for both AC and DC, and string diagrams per array and combiner box. The AC electrical design will be assumed to terminate at designated switchgear. Electrical Design - The electrical design of the system will be provided in accordance with the current prevailing NEC Electrical Code (2014) and will be based on the approved interconnection single line diagram to be provided by Client. EPC Contractor will require to be provided all updates to the single line approval during construction drawings preparation. The system will be designed considering a maximum of 2.5% voltage loss, unless Client requests a different value. EPC Contractor will include within the construction drawings, tables of AC and DC wire sizes, fuse sizes as well as associated calculations. All conduit and wiring must be UL Listed and labelled to show voltage rating. Electrical Interconnection Support - Provide design and office support for assisting with interconnection approval based on previously submitted application and single line diagrams by others. Conduit Layouts: Detail layouts of conduit routing including lengths and pull box locations.
Electrical Plans. To include power and lighting layout with circuits and home runs; electrical load requirements; panel schedules; service riser diagrams; telephone conduits; and load calculations.
Electrical Plans. (a) The above plans are to indicate:
Electrical Plans. In addition to the construction documents, include a three-line diagram, or a line diagram that meets the requirements of the local government, and complies with the state NEC. The local government should determine appropriate level of professional design requirements (e.g. preparation by a master electrician licensed by TDLR; designed and sealed by an engineer, if required by the Texas Engineering Practice Act; or PV equipment manufacturer’s engineered line diagram). A proper line diagram should include: AC and/or DC circuit arc fault protection as required by the NEC or ordinance (if any) □ Inverter listed to the U L 62109 or UL 1741 Safety Standard; photovoltaic module(s) listed t o the UL 1703 safety standard. Listings conducted by a Nationally Recognized Testing Laboratory. □ □ □ □ □ □ □ Inverter AC output disconnect location, utility disconnect location, and AC output over-current protection device rating. Location of combiner box(es), disconnect switch, size o f source circuit overcurrent protection, if required Service panel bus rating and main circuit breaker/fuse ampere rating Circuit diagram with conduit, wire type and sizes, and/or cable type and wiresizes Equipment grounding and bonding conductors and grounding electrode conductor, if applicable Battery disconnect and overcurrent protection, if applicable List of all appropriate labels and marking per NEC and IFC requirements Hot taps not allowed on line or load side service conductions. □ ADDITIONAL COMMERCIAL BUILDING INFORMATION □ Building Information: Information about the building the PV system will be attached to: □ Occupancy Group: □ Number of Stories: □ Year Built □ Construction Type: □ Area (Square Feet): □ Roof Type: □ Fire Sprinkler System (for fully sprinkled building only) SOLAR PANEL PERMIT APPLICATION 000 X. Xxxxxx Xx., Xxxxxxxx, XX 00000 Phone: (000) 000-0000 Email: xxxxxxxxxxx@xxxxxxxx.xxx Project Address (Location ): Project Valuation: $ _ NUMBER STREET Property Owner: Phone: Contractor: Contact Name: Address: _ NUMBER STREET CITY STATE ZIP Phone: Email:
Electrical Plans. The team’s electrical engineering consultant will develop an electrical plan to illustrate the locations of all site power distribution requirements to support the site lighting and irrigation system. Initial electrical will be routed and coordinated with other disciplines. Photometric plans will be provided illustrating overall illumination levels.
Electrical Plans. Prepare electrical, instrumentation, and control drawings for the proposed improvements including one-line diagram, electrical site plan, power distribution and signal plans, lighting and receptacle plans, grounding plans, motor control center details, electrical equipment details, electrical installation details and schedules, process and instrumentation diagrams, control logic diagrams, and control panel drawings.
Electrical Plans. (3) Construction plans shall be designed in accordance with the current practices of the CITY and in accordance with the principles, standards, and practices as specified in the GUIDE and shall be developed in accordance to, or be coordinated with the latest edition of the State of Wisconsin, Department of Transportation, Standard Specifications for Highway and Structure Construction, 2015 Edition, hereinafter referred to as STANDARD SPECIFICATIONS.
