Dimensions and Characteristics. Details of the Vessel’s length, breadth, depth, draft, machinery and all other particulars as well as the definitions and methods of measurement and calculation are as shown in the Specifications.
Dimensions and Characteristics. Length, overall appx. 259.8 m Length, between perpendiculars appx. 244.8 m Breadth, moulded appx. 32.25 m Depth, moulded appx. 19.3 m Designed loaded draught, moulded appx. 11.0 m Xxxxxxxxx draught, moulded appx. 12.6 m
Dimensions and Characteristics. Details of the DRILLSHIP’s dimension and characteristics including capabilities, length, breadth, depth, draft, machinery, speed and variable load capacity and all other particulars are as shown in the SPECIFICATIONS.
Dimensions and Characteristics. Length, overall Max. 228 meters Length, between perpendiculars abt. 219.4 meters Breadth, moulded abt. 42 meters Depth, moulded abt. 19 meters Xxxxxxxxx draft, moulded abt. 13 meters Speed, guaranteed: The trial speed shall not be less than 12.0 knots on the transit draught of 8.5 meters and at total thruster motor output of 28,700 KW. Guaranteed Fuel Consumption, Diesel Generator Prime Drivers (in relation to each engine): The fuel consumption shall be not more than the engine manufacturers’ nominal fuel consumption plus five percent (5) % with engine driven pumps at manufacturer’s shop trial, burning marine diesel having the lower calorific value of 10,200 kCal/kg, at 85% MCR under the environment condition of ISO 3046/1-1986 specified in the Specifications.
Dimensions and Characteristics. The VESSEL is a Xxxxxx and Xxxxxxx Millennium ExD semi-submersible drilling unit which will bear BUILDER's Hull No. P.2003 of approximate dimensions 98.82 metres long, 78.68 metres wide and 36.0 metres in height from the keel to main deck level. The details of the above particulars as well as the definitions and method of measurements and calculations are as indicated in the Specifications.
Dimensions and Characteristics. 3. Classification, Rules and Regulations ............. 4. Registration ...................................... 5.
Dimensions and Characteristics. Length, overall Max. 221.5 meters Length, between perpendiculars abt. 213.0 meters Breadth, moulded abt. 42.0 meters Depth, moulded abt. 20.0 meters Scantling draft, moulded abt. 13.0 meters The Generaxxx Xxxxx Driver will be manufactured by Wartsila at their facility in Finland. Thruster Motor: 4 MW with 77 tons thrust and 3.8 meter diameter Displacement, guaranteed: 103,000 metric tons at the scantling draft, mouldxx, xx 00.0 meters.
Dimensions and Characteristics. The Vessel shall have the following principal dimensions and characteristics:- Length overall: Approx. 299 metres Length between perpendiculars: 283.1 metres Breadth moulded: 50.0 metres Depth moulded, to upper deck: 26.5 metres Design Draft, moulded (in seawater of specific gravity 1.025): 11.7 metres Xxxxxxxxx Draft, moulded (in seawater of specific gravity of 1,025): 13.0 metres Air Draft at normal ballast condition (9.4m of moulded draft with even keel): 54.4 metres Deadweight at 11.7 metres of moulded summer draft (in sea water of gravity of 1.025) 79,970 tonnes Guaranteed Gross LNG Cargo Capacity at a temperature of -163 degrees Celsius (°C): 172,410 cubic metres (If the revised IGC Code in terms of the minimum allowable proximity of the cargo tanks to the ship’s side which will apply to gas carriers constructed on/after 1 July 2016 is waived by the Flag State, 172,410 cubic metres shall be changed to 172,610 cubic metres.) Cargo containment system type: GT NO 96-GW Guaranteed Speed in Open Water: 19.5 knots Guaranteed Speed in Ice Condition 1.5m level ice, astern: 5.0 knots Guaranteed Speed in Ice Condition 1.5m level ice, ahead: 2.0 knots Guaranteed Speed in Ice Condition 4.0m brash ice, astern: 4.0 knots Main propulsion plant: POD propulsion system and Main generator engine POD propulsion system: ABB POD propulsion system POD Propulsion power at rating and No. of sets: 15,000 kW x 3 sets Normal POD propulsion power at open sea with 21% sea margin: 39,600 kW Main generator engine and No. of sets: Wärtsilä 12V50DF x 4 sets, Wärtsilä 9L50DF x 2 sets Main generators engine power at rating: Wärtsilä 12V50DF: 11,700 kW, Wärtsilä 9L50DF: 8,775 kW Guaranteed Fuel Consumption of main diesel generator engine: 189.0 g/kWh at engine MCR during shop test with fuel oil with lower calorific value of 42.7 MJ/Kg, engine driven HT CW, LT CW and LO pumps and methane number (MN) of 80 and above under ISO reference conditions (ISO 3046-1:2002) Guaranteed Fuel Gas Power Ratio: Ninety-six per cent (96%) Guaranteed Boil-off Rate: 0.130 per cent per laden day of the Guaranteed Gross LNG Cargo Capacity. Cargo Discharge / Loading Rate: Approx. 16,000/14,000 m3/hour, for the details, Section 326 of the Specifications shall be referred to The Vessel shall have a Green Passport. The details of the above particulars as well as the definitions and method of measurements and calculations are as indicated in the Specifications.
Dimensions and Characteristics. Length overall: [****] Beam molded [****] Depth, molded (baseline @ midship) [****] The details of the above dimensions, as well as definitions and methods of measurements and calculations are more fully described in the Specifications. [****] Confidential Treatment
Dimensions and Characteristics. Length, overall appx. 259.8 m Length, between perpendiculars appx. 244.8 m Breadth, moulded appx. 32.25 m Depth, moulded appx. 19.3 m Designed loaded draught, moulded appx. 11.0 m Xxxxxxxxx draught, moulded appx. 12.6 m Main Engine : MAN B&W 8K 90MC-C type License Made MCR 49,680 bhp at 104 r.p.m. Deadweight, guaranteed : 50,500 metric tons at the moulded 8 xxxxxxxxx draught of 12.6 meters. Speed, guaranteed : 24.5 knots at a draught of 11.0 meters and main engine developing power of 38,880 bhp (metric). Fuel Consumption, guaranteed :
