As-Built Sample Clauses
POPULAR SAMPLE Copied 5 times
As-Built. Drawings
(a) As-built drawings,” as used in this clause, means drawings submitted by the Contractor or subcontractor at any tier to show the construction of a particular structure or work as actually completed under the contract. 'As-built drawings” shall be synonymous with 'Record drawings.”
(b) As required by the Contracting Officer, the Contractor shall provide the Contracting Officer accurate information to be used in the preparation of permanent as-built drawings. For this purpose, the Contractor shall record on one set of contract drawings all changes from the installations originally indicated, and record final locations of underground lines by depth from finish grade and by accurate horizontal offset distances to permanent surface improvements such as buildings, curbs, or edges of walks.
(c) This clause shall be included in all subcontracts at any tier. It shall be the responsibility of the Contractor to ensure that all as-built drawings prepared by subcontractors are submitted to the Contracting Officer.
As-Built. Drawings
As-Built. Drawings The Contractor shall prepare, and keep up-to-date, a complete set of "as-built" records of the execution of the Works, showing the exact "as-built" locations, sizes and details of the work as executed, with cross references, to relevant specifications and data sheets. The Contractor shall obtain the consent of the Engineer as to their size, the referencing system, and other pertinent details. These records shall be kept on the Site and shall be used exclusively for the purposes of this Sub-Clause. Prior to the issue of any Performance Certificate, the Contractor shall submit to the Engineer one electronic DWG and pdf copy, one full-size original copy and six printed copies of the relevant "as-built drawings" specified in the Specification.
As-Built. SPECIFICATIONS. Upon substantial completion of the Tenant Work, Tenant agrees to provide Landlord with two (2) complete sets of "As-Built" plans and specifications for the Premises and all ancillary improvements constructed by Tenant.
As-Built. LESSEE shall provide KPB with an as-built of the site following initial construction and after any substantial improvements to the site.
As-Built. The Contractor shall submit as-built sketches for assigned projects under this contract to include services and quantities/measurements of work completed and accepted by the County. Before and after pictures shall also be submitted with the as-built and invoice for the project. The cost for the as-built sketch and required pictures (including labor, materials and incidentals) shall be included on the unit prices for services provided under this contract.
As-Built. Drawings and Specifications. A CADD-DXF diskette file and a set of mylar reproducibles of all "as-built" drawings and specifications of the Premises (reflecting all field changes and including, without limitation, architectural, structural, mechanical and electrical drawings and specifications) prepared by Tenant's Architect and Engineers or by Contractors (defined below) shall be delivered by Tenant at Tenant's expense to the Landlord within thirty (30) days after completion of the Tenant Work. If Landlord has not received such drawings and diskette(s) within thirty (30) days, Landlord may give Tenant written notice of such failure. If Tenant does not produce the drawings and diskette(s) within ten (10) days after Landlord's written notice, Landlord may, at Tenant's sole cost which may be deducted from the Allowance, produce the drawings and diskette(s) using Landlord's personnel, managers, and outside consultants and contractors. Landlord shall receive an hourly rate reasonable for such production.
As-Built. The documents prepared by Contractor, and subject to review and reasonable verification and approval by Design Consultant, showing the condition of the Work of the Project as actually built, including, without limitation, the locations of mechanical, electrical, plumbing, HVAC or similar portions of the Work that are shown diagrammatically in the Contract Documents.
As-Built. The Owner acknowledges and agrees to submit an as-built grading plan showing actual ground elevations to geodetic datum at front, rear and side of house, driveways at edge of pavement and at garage, all lot corners, swale inverts, terraces and top and bottom of retaining walls. The grades must be taken under the supervision of a professional Civil Engineer or Ontario Land Surveyor. The Owner acknowledges and agrees to have a Civil Engineer licensed in the Province of Ontario or an Ontario Land Surveyor certify that the final lot grading is within 0.2 metres of the approved grades on the grading and drainage plan. The Owner acknowledges and agrees to have a Civil Engineer licensed in the Province of Ontario or Ontario Land Surveyor certify the elevation of the top of footings prior to completion of the foundation walls, and the Owner shall remove said footing if found to be out by more than 0.1 metre from the approved design grading plan. Said elevation shall be submitted by the professional engineer or Ontario land Surveyor to the General Manager, Planning, Infrastructure and Economic Development for approval prior to the completion of the foundation walls.
As-Built. Not later than 60 days after completing the Project construction activities, the Permittee shall submit an as-built report to the Water Board. The report shall include a description of the areas of actual disturbance during Project construction and the photographs and map specified in Condition 12. The as-built report shall provide a written explanation of the need for any deviations from the approved Project plans. The map included with the as- built report shall include an as-planted map of the willow cuttings (CWC Section 13267);