Acceptable Standards definition

Acceptable Standards means the standards for Trade Waste as set out in Schedule 2 to this agreement and as prescribed by the Corporation from time to time.
Sample 1Sample 2Sample 3
Acceptable Standards means the standard of maintaining and repairing a building of similar structure and use that would be followed by a prudent owner of a similar building and acceptable to NRH;
Sample 1Sample 2
Acceptable Standards means:
Sample 1

Examples of Acceptable Standards in a sentence

  • Acceptable Standards of DressEmployees who are not required to wear uniforms must present for work in a professional manner and be suitably attired for their work activities.

  • Minimum Acceptable Standards for Measurement and Reporting of Surface and Ground Water Diversions.

  • Examples include ground training, deviations from the syllabus, combining flight lessons, poor training continuity, lack of progress, Below Average or Below Acceptable Standards grades, etc.

  • Closing instructions will be sent to the title company once funds, Minimum Acceptable Standards (MAS) inspection, environmental review, COFW borrower disclosures, and all conditions have been received.

  • Acceptable Standards of Dress All clothing worn by the driver must be clean and in good condition, and the driver must have good standards of personal hygiene.

  • For a longitudinal study, unit record data are gathered for the same Measuring Economic DisadvantageEconomic disadvantage can be defined and measured in different ways, both quantitatively and qualitatively.

  • The Proponent shall maintain the Project to Acceptable Standards.

  • The department will in turn forward the Form MO W-4 to the Division of Child Support Enforcement.

  • A major part of upholding our Acceptable Standards policy is the Disciplinary Committee.

  • Acceptable Standards The Secretary informed the members that anyone attending meetings should attend in suitable business attire or uniform.


More Definitions of Acceptable Standards

Acceptable Standards means the following:
Sample 1

Related to Acceptable Standards

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Generally accepted auditing standards means Canadian Generally Accepted Auditing Standards as adopted by the Canadian Institute of Chartered Accountants applicable as of the date on which such record is kept or required to be kept in accordance with such standards.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Operating Standards shall have the meaning given such term in Section 2.1.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Generally applicable environmental radiation standards means standards issued by the U.S. Environmental Protection Agency (EPA) under the authority of the Atomic Energy Act of 1954, as amended, that impose limits on radiation exposures or levels, or concentrations or quantities of radioactive material, in the general environment outside the boundaries of locations under the control of persons possessing or using radioactive material.

  • auditing standards means auditing standards as defined in National Instrument 52-107 Acceptable Accounting Principles and Auditing Standards;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • State minimum standards means minimum requirements

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Common Reporting Standard means the standard for automatic exchange of financial account information in tax matters (which includes the Commentaries), developed by the OECD, with G20 countries;

  • Common Reporting Standard (CRS) means the Standard for Automatic Exchange of Financial Account Information (“AEOFAI”) in Tax Matters and was developed in response to the G20 request and approved by the Organisation for Economic Co-operation and Development (OECD) Council on 15 July 2014, calls on jurisdictions to obtain information from their financial institutions and automatically exchange that information with other jurisdictions on an annual basis. It sets out the financial account information to be exchanged, the financial institutions required to report, the different types of accounts and taxpayers covered, as well as common due diligence procedures to be followed by financial institutions.

  • Service Standards means the set of Service Measures, Service Levels, conditions and Service Guarantee Payments as set out in Schedule 1;

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Uniform Grant Management Standards or “UGMS” means uniform grant and contract administration procedures, developed under the authority of Chapter 783 of the Texas

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;