Wide Area definition

Wide Area means the entire Reliability Coordinator Area as well as the critical flow and status information from adjacent Reliability Coordinator Areas as determined by detailed system studies to allow the calculation of Interconnected Reliability Operating Limits.**
Sample 1Sample 2Sample 3
Wide Area. Sites are defined as follows:
Sample 1Sample 2Sample 3
Wide Area means the qualification of an alert state, emergency state or blackout state when there is a risk of propagation to the interconnected transmission systems;
Sample 1Sample 2Sample 3

Examples of Wide Area in a sentence

  • Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

  • Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by TI, SLIN, or CLIN level.

  • End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003.

  • Free public access is available on a Wide Area Information Server (WAIS)through the Internet and via asynchronous dial-in.

  • AF sites may include commercial-off-the-shelf (COTS) National Security Systems (NSS), intelligence data handling equipment, C2 equipment, Local Area Networks (LAN), Wide Area Networks (WAN), secure and non-secure video, voice and data systems, and/or mission equipment.

  • It is available on a Wide Area Information Server (WAIS) through the Internet and viaasynchronous dial-in.

  • No activity shall be assigned acceptance responsibility unless that activity has acceptors registered in Wide Area WorkFlow (WAWF).

  • Free public access is available on a Wide Area Information Server (WAIS) through the Internet and via asynchronous dial-in.

  • Except as provided in paragraph (d) of this clause, the Contractor shall submit payment requests and receiving reports in electronic form using Wide Area WorkFlow (WAWF).

  • However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.


More Definitions of Wide Area

Wide Area means the entire Reliability Coordinator Area as well as the critical flow and status information from adjacent Reliability Coord inator Are as as determ ined by detailed syste m studies to allow the calculation of Interconnected Reliability Operating Limits.**
Sample 1Sample 2
Wide Area means of RCA delivery
Sample 1Sample 2
Wide Area. Sampling to Assess Natural Recruitment, 2023 In June and August, 2023 staff of PSRF together with community and agency volunteers conducted a sampling program in Xxxxxxx Bay designed to provide a current population estimate of Olympia oysters now present in the bay. The methods and locations for the 2023 sampling were different than the methods used in 2018 and were based on a statistical analysis of the 2018 dataset and the provisions of the Quality Assurance Project Plan (QAPP) (Xxxxxx 2023). Olympia oyster sampling in 2023 was based on a "Bootstrapping" analysis conducted by PSRF staff of the 2018 oyster sampling dataset. Bootstrapping is any test or metric that uses random sampling with replacement (e.g., mimicking the sampling process), and falls under the broader class of resampling methods. Bootstrapping assigns measures of accuracy (bias, variance, confidence intervals, prediction error, etc.) to sample estimates This technique allows estimation of the sampling distribution of almost any statistic using random sampling methods (Efron 1987), and was used in place of the fixed transect method applied in 2018 (Xxxxxx 2018). Based on PSRF's analysis, the best approach to generate a bay-side population estimate in 2023 was to define a single population that is distributed across four regions (March Point, Xxxxxxxxxx Spit, the rip rap causeway and the south bay channels). In each region, and within discrete polygons, PSRF defined the Olympia oyster distribution between +2' and -1.5' Mean Lower Low Water (approximately where the eelgrass starts), except in the south, where samples were restricted to the channels. Using GPS, PSRF randomly distributed 397 sample positions within these polygons, which were located in the field with a GPS R-1 receiver. The 397- sample size was estimated to give a mean density estimate of +/- 25% of the true population mean (which exceeds the +/-30% standard for this type of fishery resource assessment). Sample placement in the field was determined and marked with temporary flags. Survey teams leapfrogged through the survey, collecting quadrat samples (Fig. 8) at the marked flags and retrieving the flags. Sample size varied with each location. In areas with relatively high oyster densities sample size was usually 1/10m2 or 1/4m2. For low density areas, the sample size varied up to 1m2 by counting oysters in the first 1/10m2 sample and then "flipping" the quadrat to adjacent locations up to 9 times and counting oysters in each ...
Sample 1
Wide Area. Sampling to Assess Natural Recruitment In 2018 when the last "wide-area" survey was conducted in Xxxxxxx Bay, 19 discrete areas were sampled via quadrates (1/10m2) spaced along pre-established transects (Xxxxxx 2018, Table 5). A population estimate was calculated for each of these areas. which provided a bay-wide estimate. The sampling represented a total area of 136,678 m2 in which 1,067 samples were collected yielding a bay-wide estimate of 2,911,733 oysters. In 2023 the wide-area sampling effort was consolidated into 4 strata, which contained most of the areas sampled in 2018. This sampling effort, led by PSRF staff and aided by numerous volunteers differed from 2018 as described in the Methods section above. Locations of each of the samples are shown in Figure 9. Results of the 2023 sampling showed that there is a healthy and expanding Olympia oyster population in Xxxxxxx Bay. A total of 398 samples collected in 2023 were representative of 113,020 m2 and resulted in a bay-wide population estimate of 5,544,124 oysters for an increase of about 90% over the five years since the 2018 survey (see Appendix 1 for PSRF's Summary Report to Skagit MRC). The largest number of Olympia oysters were found on the March's Point tidelands (4,257,230 oysters), especially in the five constructed shell beds. The second largest number of oysters was in the southern xxxxx channels (1,267,028 oysters) (Fig. 14 and Appendix 1, Table 1), which was an amazing increase for this area compared to the 18,360 oysters in estimated in 2017. PSRF's sampling program (and Skagit MRC's 2018 survey) largely ignored areas of the bay where qualitative observations indicated oyster densities of <1 oyster/m2. Thus, the population estimates given above are deemed to be conservative. Volunteer Monitoring Marine bivalves, including oysters, provide many "goods and services" to human populations in the areas of water quality, coastal protection, harvests of wild and cultured foods/shells, biodiversity, biotechnology (especially drugs and pharmaceuticals) and volunteerism. Restoration projects and programs benefit from community participation via an added labor force and by fostering community investment and support, which is critical for project success and future restoration investments. Community participants gain physically and psychologically rewarding experiences from being a part of restoration projects, while fostering an environmental ethos. Oyster restoration serves as particularly ideal ...
Sample 1
Wide Area means an operating area more than 3 kilometres in radius from a specified location;
Sample 1
Wide Area means an operating area greater than 3 km and typically up to 30 km in radius from a specified location;
Sample 1

Related to Wide Area

  • CONE Area means the areas listed in Tariff, Attachment DD, section 5.10(a)(iv)(A) and any LDAs established as CONE Areas pursuant to Tariff, Attachment DD, section 5.10(a)(iv)(B).

  • Lot area means the total horizontal area within the lot lines of a lot.

  • Carpet Area means the net usable floor area of an apartment, excluding the area covered by the external walls, areas under services shafts, exclusive balcony or verandah area and exclusive open terrace area, but includes the area covered by the internal partition walls of the apartment.

  • Common Area means all areas and facilities within the Project that are not designated by Landlord for the exclusive use of Tenant or any other lessee or other occupant of the Project, including the parking areas, access and perimeter roads, pedestrian sidewalks, landscaped areas, trash enclosures, recreation areas and the like.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • the Building means any building of which the Property forms part.

  • Building means any structure used or intended for supporting or sheltering any use or occupancy.

  • Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.

  • Work area means a room or defined space in a workplace where hazardous chemicals are produced or used, and where employees are present.

  • Slum area means any area where dwellings predominate which, by reason of depreciation, overcrowding, faulty arrangement or design, lack of ventilation, light or sanitary facilities, or any combination of these factors, are detrimental to the public safety, health or morals.

  • the Area means the area for which for the time being the Appointee holds the appointment as water undertaker or, as the case may be, sewerage undertaker;

  • Building Area means the greatest horizontal area of a building within the outside surface of the exterior walls.

  • Areas means such areas within the DAS Areas that are identified in Annexure A annexed to this Agreement;

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • Parking Area means the area designated as a permitted parking area and as a special parking area by the Road Traffic (Permitted Parking Area and Special Parking Area) (County of Denbighshire) Order 2004 and “permitted parking area” and “special parking area” are to be read accordingly;”.

  • mixed-use building means a building or structure containing a residential and non- residential use other than a home occupation;

  • Landscaped area means all the planting areas, turf areas, and water features in a landscape design plan subject to the Maximum Applied Water Allowance and Estimated Applied Water Use calculations. The landscaped area does not include footprints of buildings or structures, sidewalks, driveways, parking lots, decks, patios, gravel or stone walks, other pervious or non-pervious hardscapes, and other non-irrigated areas designated for non-development (e.g., open spaces and existing native vegetation).

  • Premises means the location where the Services are to be supplied, as set out in the Specification.

  • movement area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, consisting of the manoeuvring area and the apron(s);