EXHIBIT 2.01 STOCK PURCHASE AGREEMENT ACQUISITION OF THE STOCKStock Purchase Agreement • January 31st, 2000 • Ufp Technologies Inc • Plastics foam products • Massachusetts
THIRD AMENDMENT TO CREDIT AGREEMENTCredit Agreement • March 30th, 1999 • Ufp Technologies Inc • Plastics foam products • Massachusetts
AMENDED AND RESTATED CREDIT AGREEMENT Dated as of February 1, 2018. among UFP TECHNOLOGIES, INC., as Borrower, MOULDED FIBRE TECHNOLOGY, INC., SIMCO INDUSTRIES, INC., STEPHENSON & LAWYER, INC., PATTERSON PROPERTIES CORPORATION, and DIELECTRICS, INC.,...Credit Agreement • March 16th, 2018 • Ufp Technologies Inc • Plastics foam products • Massachusetts
Any increase or decrease in the Applicable Rate resulting from a change in the Consolidated Leverage Ratio shall become effective as of the first Business Day immediately following the date a Compliance Certificate is delivered pursuant to Section 6.02(a); provided, however, that if a Compliance Certificate is not delivered when due in accordance with such Section, then, upon the request of the Required Lenders, Pricing Level 3 shall apply, in each case as of the first Business Day after the date on which such Compliance Certificate was required to have been delivered and in each case shall remain in effect until the first Business Day following the date on which such Compliance Certificate is delivered. In addition, at all times while the Default Rate is in effect, the highest rate set forth in each column of the Applicable Rate shall apply.
Exhibit 10.38.30 SUPPLY AGREEMENT THIS AGREEMENT is made as of January 1, 1999, BETWEEN:Supply Agreement • March 22nd, 2000 • Ufp Technologies Inc • Plastics foam products • Ontario
UFP TECHNOLOGIES, INC. and AMERICAN STOCK TRANSFER & TRUST COMPANY RIGHTS AGENT RIGHTS AGREEMENT Dated as of January 13, 1999Rights Agreement • January 28th, 1999 • Ufp Technologies Inc • Plastics foam products • Delaware
ASSETS FOR CASHPurchase Agreement • March 30th, 1999 • Ufp Technologies Inc • Plastics foam products • California
SECOND AMENDMENT TO CREDIT AGREEMENT ----------------Credit Agreement • November 13th, 1997 • Ufp Technologies Inc • Plastics foam products • Massachusetts
CITIZENS BANK OF MASSACHUSETTS THE LENDER UFP TECHNOLOGIES, INC. MOULDED FIBRE TECHNOLOGY, INC. THE BORROWERLoan Agreement • March 22nd, 2000 • Ufp Technologies Inc • Plastics foam products • Massachusetts
SECOND AMENDED AND RESTATED CREDIT AGREEMENT Dated as of December 22, 2021 among UFP TECHNOLOGIES, INC., as Borrower, CERTAIN SUBSIDIARIES OF UFP TECHNOLOGIES, INC. PARTY HERETO, as Guarantors, BANK OF AMERICA, N.A., as Administrative Agent, Swingline...Credit Agreement • December 23rd, 2021 • Ufp Technologies Inc • Surgical & medical instruments & apparatus • Massachusetts
Any increase or decrease in the Applicable Rate resulting from a change in the Consolidated Leverage Ratio shall become effective as of the first Business Day immediately following the date a Compliance Certificate is delivered pursuant to Section 6.02(a); provided, however, that if a Compliance Certificate is not delivered when due in accordance with Section 6.02(a), then, upon the request of the Required Lenders, Pricing Level 4 shall apply, in each case as of the first Business Day after the date on which such Compliance Certificate was required to have been delivered and in each case shall remain in effect until the first Business Day following the date on which such Compliance Certificate is delivered. In addition, at all times while the Default Rate is in effect, the highest rate set forth in each column of the Applicable Rate shall apply.
Exhibit B STOCK UNIT AWARD AGREEMENT (Granted under the UFP Technologies, Inc. 2003 Incentive Plan)Stock Unit Award Agreement • February 8th, 2024 • Ufp Technologies Inc • Surgical & medical instruments & apparatus • Delaware
This Stock Unit Award Agreement is entered into as of the 6th day of February, 2024 by and between UFP Technologies, Inc. (hereinafter the “Company”) and _______________ (the “Awardee”). Capitalized terms used but not defined herein shall have the meanings assigned to them in the Company’s 2003 Incentive Plan, as amended (the “Plan”). Stock Unit Awards (SUA’s represent the Company’s unfunded and unsecured promise to issue shares of Common Stock at a future date, subject to the terms of this Award Agreement, including, without limitation, the performance objectives set forth in Schedule A hereto, and the Plan. Awardee has no rights under the SUAs other than the rights of a general unsecured creditor of the Company.
STOCK UNIT AWARD AGREEMENT (Granted under the UFP Technologies, Inc. 2003 Incentive Plan)Stock Unit Award Agreement • February 26th, 2016 • Ufp Technologies Inc • Plastics foam products • Delaware
This Stock Unit Award Agreement is entered into as of the 22nd day of February, 2016 by and between UFP Technologies, Inc. (hereinafter the “Company”) and (the “Awardee”). Capitalized terms used but not defined herein shall have the meanings assigned to them in the Company’s 2003 Incentive Plan, as amended (the “Plan”). Stock Unit Awards (SUA’s represent the Company’s unfunded and unsecured promise to issue shares of Common Stock at a future date, subject to the terms of this Award Agreement, including, without limitation, the performance objectives set forth in Schedule A hereto, and the Plan. Awardee has no rights under the SUAs other than the rights of a general unsecured creditor of the Company.
EXHIBIT 10.43 BUSINESS PROPERTY LEASE 1. THIS LEASE made this 23RD day of AUGUST 2000, by and between QUADRATE DEVELOPMENT, L.L.C., a Michigan Limited Liability Company 15801 23 Mile Road Macomb Township, MI 48042 hereinafter designated as the...Ufp Technologies Inc • March 26th, 2001 • Plastics foam products • Michigan
UFP TECHNOLOGIES, INC. and AMERICAN STOCK TRANSFER & TRUST COMPANY, LLC, as Rights Agent RIGHTS AGREEMENT Dated as of March 20, 2009Rights Agreement • March 24th, 2009 • Ufp Technologies Inc • Plastics foam products • Delaware
Rights Agreement, dated as of March 20, 2009 (“Agreement”), between UFP Technologies, Inc., a Delaware corporation (the “Company”), and American Stock Transfer & Trust Company, LLC, a New York state limited liability trust company, as Rights Agent (the “Rights Agent”).
LEASE AGREEMENTLease Agreement • November 12th, 2009 • Ufp Technologies Inc • Plastics foam products
Premises: That portion of the Building, containing approximately 78,913 rentable square feet, as determined by Landlord, as shown on Exhibit A.
February 20, 2001 Mr. Jeffrey L. Berkowitz Cramer, Berkowitz Partners, L.P. 40 Fulton Street, 24th Floor New York, NY 10038 RE: Agreement Letter to Purchase 300,000 Shares of UFPT Stock Dear Mr. Berkowitz: The purpose of this letter is to set forth...Ufp Technologies Inc • March 26th, 2001 • Plastics foam products • Massachusetts
Exhibit A STOCK UNIT AWARD AGREEMENT (Granted under the UFP Technologies, Inc. 2009 Director Stock Incentive Plan)Stock Unit Award Agreement • August 9th, 2019 • Ufp Technologies Inc • Plastics foam products • Delaware
Exhibit D STOCK UNIT AWARD AGREEMENT (Granted under the UFP Technologies, Inc. 2003 Incentive Plan)Stock Unit Award Agreement • February 21st, 2023 • Ufp Technologies Inc • Surgical & medical instruments & apparatus • Delaware
This Stock Unit Award Agreement is entered into as of the 14th day of February, 2023 by and between UFP Technologies, Inc. (hereinafter the “Company”) and _______________ (the “Awardee”). Capitalized terms used but not defined herein shall have the meanings assigned to them in the Company’s 2003 Incentive Plan, as amended (the “Plan”). Stock Unit Awards (SUA’s represent the Company’s unfunded and unsecured promise to issue shares of Common Stock at a future date, subject to the terms of this Award Agreement, including, without limitation, the performance objectives set forth in Schedule A hereto, and the Plan. Awardee has no rights under the SUAs other than the rights of a general unsecured creditor of the Company.
LEASE MULTI TENANT INDUSTRIAL MODIFIED NET LANDLORD:Lease • May 11th, 2001 • Ufp Technologies Inc • Plastics foam products • California
SUB LEASE AGREEMENTSub Lease Agreement • March 27th, 2008 • Ufp Technologies Inc • Plastics foam products • Texas
This Lease Agreement is executed as of the 1st day of July, 2007 , between Kessler Industries, Inc., (“Landlord” or “Lessor”) and UFP Technologies, Inc. (“Tenant” or “Lessee”).
Exhibit A INCENTIVE STOCK OPTION AGREEMENTIncentive Stock Option Agreement • February 21st, 2023 • Ufp Technologies Inc • Surgical & medical instruments & apparatus
INCENTIVE STOCK OPTION AGREEMENT made this 14th day of February 2023 between UFP TECHNOLOGIES, INC., a Delaware corporation (hereinafter called the Corporation), and R. JEFFREY BAILLY, an employee of the Corporation or one or more of its subsidiaries (hereinafter called the Employee).
EXHIBIT B NON-QUALIFIED STOCK OPTION AGREEMENTNon-Qualified Stock Option Agreement • August 7th, 2020 • Ufp Technologies Inc • Surgical & medical instruments & apparatus
OPTION AGREEMENT made as of the 10th day of June, 2020 between UFP TECHNOLOGIES, INC., a Delaware corporation (hereinafter called the “Corporation”), and , a non-employee director of the Corporation (hereinafter called the “Optionee”).
AMENDED AND RESTATED CREDIT AND SECURITY AGREEMENT dated as of January 27, 2009 among UFP TECHNOLOGIES, INC., MOULDED FIBRE TECHNOLOGY, INC., SIMCO INDUSTRIES, INC., SIMCO AUTOMOTIVE TRIM, INC., STEPHENSON & LAWYER, INC. and PATTERSON PROPERTIES...Credit and Security Agreement • March 27th, 2009 • Ufp Technologies Inc • Plastics foam products • Massachusetts
THIS AMENDED AND RESTATED CREDIT AND SECURITY AGREEMENT dated as of January 27, 2009 (this “Agreement”) is by and among UFP Technologies, Inc., a Delaware corporation, Moulded Fibre Technology, Inc., a Maine corporation, Simco Industries, Inc., a Michigan corporation, Simco Automotive Trim, Inc., a Michigan corporation, Stephenson & Lawyer, Inc., a Michigan corporation, and Patterson Properties Corporation, a Michigan corporation, as joint and several borrowers, the guarantors from time to time party hereto, and BANK OF AMERICA, N.A., as Lender.
EXHIBIT A STOCK UNIT AWARD AGREEMENT (Granted under the UFP Technologies, Inc. 2009 Director Stock Incentive Plan)Stock Unit Award Agreement • August 7th, 2020 • Ufp Technologies Inc • Surgical & medical instruments & apparatus • Delaware
UFP Technologies, Inc. THE EXECUTIVE NONQUALIFIED EXCESS PLANSM PLAN DOCUMENTUfp Technologies Inc • November 13th, 2006 • Plastics foam products
Granted under the UFP Technologies, Inc. 2003 Incentive Plan)2012 Stock Unit Award Agreement • February 24th, 2012 • Ufp Technologies Inc • Plastics foam products • Delaware
This Stock Unit Award Agreement is entered into as of the 17th day of February, 2012 by and between UFP Technologies, Inc. (hereinafter the “Company”) and (the “Awardee”). Capitalized terms used but not defined herein shall have the meanings assigned to them in the Company’s 2003 Incentive Plan, as amended (the “Plan”). Stock Unit Awards (SUA’s represent the Company’s unfunded and unsecured promise to issue shares of Common Stock at a future date, subject to the terms of this Award Agreement, including, without limitation, the performance objectives set forth in Schedule A hereto, and the Plan. Awardee has no rights under the SUAs other than the rights of a general unsecured creditor of the Company.
AMENDMENT NO. 5 TO LEASE Raritan, New JerseyUfp Technologies Inc • March 13th, 2015 • Plastics foam products
BETWEEN: RARITAN JOHNSON ASSOCIATES, LLC, a New Jersey Limited Liability Company, having an office at 30 Route 22 West, Green Brook, New Jersey 08812, herein referred to as Landlord,
SECOND AMENDMENT TO CREDIT AGREEMENTCredit Agreement • August 11th, 2004 • Ufp Technologies Inc • Plastics foam products • Massachusetts
This SECOND AMENDMENT TO CREDIT AGREEMENT dated this 28th day of June, 2004 (this “Amendment”), is made by and among UFP Technologies, Inc., a Delaware corporation, Moulded Fibre Technology, Inc., a Maine corporation, Simco Industries, Inc., a Michigan corporation, and Simco Automotive Trim, Inc., a Michigan corporation (collectively, the “Borrowers”), and Fleet Capital Corporation (the “Lender”).
FIRST LEASE EXTENSION AGREEMENT AND SECOND AMENDMENT TO BUSINESS PROPERTY LEASEFirst Lease Extension Agreement • March 27th, 2008 • Ufp Technologies Inc • Plastics foam products
This Agreement entered into this day of , 2007 by and between QUADRATE DEVELOPMENT, L.L.C., a Michigan limited liability company, whose office is located at 15801 23 Mile Road, Macomb, MI 48042 (hereinafter “Landlord”) and SIMCO AUTOMOTIVE TRIM, INC., a Michigan corporation whose office is located at 51362 Quadrate Drive, Macomb Township, MI 48042 (hereinafter “Tenant”).
SECURITIES PURCHASE AGREEMENTSecurities Purchase Agreement • December 23rd, 2021 • Ufp Technologies Inc • Surgical & medical instruments & apparatus • Delaware
This Securities Purchase Agreement (this “Agreement”) is made as of December 22, 2021 (the “Signing Date”), by and among UFP Technologies, Inc., a Delaware corporation (“Buyer”), DAS Medical Holdings LLC, a Georgia limited liability company (the “Company”), Parallax Investments, LLC, a Georgia limited liability company (“Seller”), and the Purchase Price Beneficiaries defined in Article XII and set forth on the signature pages to this Agreement. The Purchase Price Beneficiaries are parties to this Agreement solely with respect to Section 3.10 (Limited Reliance Disclaimer), 9.5 (Confidentiality), Article V (Indemnification) and Section 11.17 (Representation of the Company and Company Entities). Buyer, Company, Seller, and the Additional Parties may be collectively referenced herein as “Parties” and individually referenced herein as “Party”.
THIRD AMENDMENT TO LEASELease • November 7th, 2008 • Ufp Technologies Inc • Plastics foam products
THIS AMENDMENT is made this 20 day of August, 2008 by and between CLINTON BASE COMPANY, LLC, a limited liability company whose address for the purpose of this Amendment is 1003 31st Avenue, Camanche, IA 52730 (hereinafter called “Landlord”) and MOULDED FIBRE TECHNOLOGY, INC., a corporation whose address for the purpose of this Amendment is 1521 Windsor Drive, Clinton, IA 52732 (hereinafter called “Tenant”).
MODIFICATION AGREEMENTModification Agreement • August 14th, 2002 • Ufp Technologies Inc • Plastics foam products
This Modification Agreement (“Agreement”) is made as of May 15, 2002, by and among Citizens Bank of Massachusetts, a Massachusetts banking corporation (“Citizens”), on the one hand, and UFP Technologies, Inc., a Delaware corporation (“UFP”), Moulded Fibre Technology, Inc., a Maine corporation (“MFT”), Simco Industries, Inc., a Michigan corporation (“SII”) and Simco Automotive Trim, Inc., a Michigan corporation (“SAT” and together with UFP, MFT and SII, collectively, “Borrowers”), on the other.
Granted under the UFP Technologies, Inc. 2003 Incentive Plan)Stock Unit Award Agreement • February 22nd, 2013 • Ufp Technologies Inc • Plastics foam products • Delaware
This Stock Unit Award Agreement is entered into as of the 18th day of February, 2013 by and between UFP Technologies, Inc. (hereinafter the “Company”) and R. Jeffrey Bailly (the “Awardee”). Capitalized terms used but not defined herein shall have the meanings assigned to them in the Company’s 2003 Incentive Plan, as amended (the “Plan”). Stock Unit Awards (SUA’s represent the Company’s unfunded and unsecured promise to issue shares of Common Stock at a future date, subject to the terms of this Award Agreement, including, without limitation, the performance objectives set forth in Schedule A hereto, and the Plan. Awardee has no rights under the SUAs other than the rights of a general unsecured creditor of the Company.
STOCK PURCHASE AGREEMENTStock Purchase Agreement • November 5th, 2021 • Ufp Technologies Inc • Surgical & medical instruments & apparatus • Delaware
This Stock Purchase Agreement (this “Agreement”) is made as of October 21, 2021 (the “Effective Date”), by and among UFP Technologies, Inc., a Delaware corporation (“Buyer”), Contech Medical, Inc., a Rhode Island corporation (the “Company”), and all of the Company’s shareholders, the names of which are set forth on the signature pages to this Agreement (collectively, “Sellers” and, individually, “Seller”), and Christopher M. Brynes, solely in his capacity as agent for Sellers (the “Sellers’ Representative” and, together with Buyer, Company, and Sellers, the “Parties”).
October 8, 2007Letter Agreement • October 12th, 2007 • Ufp Technologies Inc • Plastics foam products • Massachusetts
This letter agreement constitutes the entire agreement between UFP Technologies, Inc. (the “Company”) and you regarding the terms of your employment with the Company.
ContractTo Lease • March 10th, 2017 • Ufp Technologies Inc • Plastics foam products
This 2016 Amendment to Lease ("2016 Amendment") is made and entered into as of May 12, 2016 by and between 6077 Fulton Industrial Boulevard, LLC, ("Landlord") and Simco Automotive Trim, Inc., ("Tenant") with reference to the following Recitals:
