Wet weight definition

Wet weight means the weight of harvested, non-dried cannabis, on the licensed premises or being transported between licensees that does not meet the net weight requirements in section 8406(b).
Sample 1Sample 2Sample 3
Wet weight means the biological mass of live abalone and dead abalone before dehydration.
Sample 1Sample 2

Examples of Wet weight in a sentence

  • Wet weight and net weight shall be measured, recorded, and reported in U.S. customary units (e.g., ounce or pound); or International System of Units (e.g., kilograms, grams, or milligrams).

  • Wet weight and net weight shall be determined following weighing device requirements pursuant to section 8213 of this chapter and measured, recorded, and reported in U.S. customary units (e.g., ounce or pound); or International System of Units (e.g., kilograms, grams, or milligrams).

  • Wet weight conversion will be made based on the weight and egg measurements.

  • Wet weight of soil core is determined immediately in lab after arrival.

  • Conversions: Wet weight = (dry weight) (1 - (percent moisture/100) Dry weight = (wet weight)/(1 - (percent moisture/100) Example: 0.8 mg.kg-1(dw) of a compound in a bony fish equals 0.2 mg.kg-1 (ww) assuming 75% moisture Wet weight = (dry weight) (1 - (percent moisture/100) 0.2 mg.kg-1 (ww) = (0.8 mg.kg-1(dw)) (1-75/100) Most BAF values and uptake factors are expressed in terms of dry weight of tissue and media (soil and sediment) concentrations.

  • Wet weight values can be converted to dry weight using the moisture content of the drilling waste sample.

  • Wf - Wt where : W = Wet weight in g of solid to be charged to extractor.

  • Wet weight tissue concentrations should be used in comparison to action level values or advisories reported as wet weight concentrations, such as Food and Drug Administration (FDA) Action Levels, or for use in risk modeling that makes assumptions of dose coming from consumption of “fresh” material, not dried matter.

  • No employee shall be permitted to make a written or verbal agreement with the Employer or its representative which may conflict with the terms of this Collective Agreement.

  • Wet weight and net weightshall be determined following weighing device requirements pursuant to section 8213 of this chapter and measured, recorded, and reported in U.S. customary units (e.g., ounce or pound); or International System of Units (e.g., kilograms, grams, or milligrams).

Related to Wet weight

  • Net weight means the weight of the goods themselves without packing materials and packing containers of any kind;

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Weight means aside from the obvious meaning in the physical sciences, the word is used in reference to a person's "size".

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Actual weight means the actual unladen weight of a vehicle or combination of

  • Gross weight means the aggregate weight of a vehicle or combination of vehicles and the load

  • Density means the permitted number of dwelling units per

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Deadweight (DW) means the difference in metric tons between the displacement of a ship in water of a specific gravity of 1.025 at the load waterline corresponding to the assigned summer freeboard and the lightweight of the ship.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Metric means a) when referenced in the context of a Named User, the individual Named User category and type (and corresponding Named User definition setting for such Named User’s use rights) as further described in Section 2.1 hereof -and- b) when referenced in the context of a Package, the individual business metric corresponding with each Package as further described in Section 2.2 hereof;

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Sewage sludge fee weight means the weight of sewage sludge, in dry U.S. tons, excluding admixtures such as liming materials or bulking agents. Annual sewage sludge fees, as per section 3745.11(Y) of the Ohio Revised Code, are based on the reported sludge fee weight for the most recent calendar year.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Psia means pounds per square inch absolute.

  • Weighting with respect to an Underlying means the weighting in relation to the relevant Underlying as specified in the table in the definition of such Underlying.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • height means the vertical distance between grade and the highest point of the building or structure;

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Hot Weather Alert means the notice provided by PJM to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for extreme hot and/or humid weather conditions which may cause capacity requirements and/or unit unavailability to be substantially higher than forecast are expected to persist for an extended period. IDR Transfer Agreement:

  • Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;

  • Runway means a defined rectangular area on a land aerodrome prepared for the landing and take-off of aircraft;