Well plugging definition

Well plugging means the closure of an abandoned well with plugging materials by procedures which will permanently seal the well from contamination by surface drainage and permanently seal off the well from contamination into an aquifer. “Well plugging” involves the proper application of filling and sealing materials.
Sample 1Sample 2Sample 3
Well plugging means the closure of an abandoned well with plugging materials by procedures which will permanently seal the well from contamination by surface drainage and permanently seal off the well from contamination into an aquifer. “Well plugging” involves the proper application of filling and sealing materials. “Well plugging contractor” means a well contractor certified to plug only Class 1 or Class 3 wells but notcertified to abandon Class 2 wells or perform any other well services.Commented [16]: Well reconstruction - Defined in Chapter 49.
Sample 1
Well plugging means the closure of an abandoned well with plugging materials by procedures which will permanently seal the well from contamination by surface drainage and permanently seal off the well from c ontamination into an aquifer. “Well plugging” includes the proper application of filling and sealing material. 567—48.3(455B) Applicability. The provisions contained herein apply to all GHEX loop boreholes constructed for the purpose of utilizing the heat-exchange properties of the ground or groundwater. They shall apply to all GHEX loop borehole systems constructed 20 feet or greater in depth. They shall also apply to both residential and commercial installations. These rules do not apply to surface water GHEX systems, trench installations less than 20 feet in depth, or other types of GHEX installations less than 20 feet deep. All GHEX pump and dump well systems, GHEX pump and re-inject well systems, GHEX standing column heat-exchange well systems or any other
Sample 1

Examples of Well plugging in a sentence

  • The Permittee shall obtain written approval from EPA of any proposed and requested Plugging and Abandonment Plan revisions/modifications prior to resuming Injection Well plugging and abandonment activities at the Facility.

  • The Permittee shall notify the Director, in writing and in accordance with Paragraph II.A., above, at least forty-five (45) days before initiating any Injection Well plugging and abandonment activities, as described in Paragraph III.C., below, of this Permit.

  • The Permittee shall submit any proposed revisions to the Plugging and Abandonment Plan attached to, and incorporated within, this Permit to the Director, in writing and in accordance with Paragraph II.A., above, no less than forty-five (45) days prior to initiating any Injection Well plugging and abandonment activities at the Facility.

  • Well plugging reports, post-injec- tion site care data, including, if appro- priate, data and information used to develop the demonstration of the alter- native post-injection site care time- frame, and the site closure report col- lected pursuant to requirements at §§ 146.93(f) and (h) shall be retained for 10 years following site closure.

  • The Permittee shall submit any proposed revisions to the Plugging and Abandonment Plan attached to, and incorporated within, this Permit to the Director, in writing and in accordance with Paragraph II.A., above, no less than forty-five (45) calendar days prior to initiating any Injection Well plugging and abandonment activities at the Facility.

  • Well plugging and decommissioning When the productive life of a well is over, or where it has been unsuccessful, wells are plugged and abandoned.

  • The Permittee shall notify the Director, in writing and in accordance with Paragraph II.A., above, at least forty-five (45) calendar days before initiating any Injection Well plugging and abandonment activities, as described in Paragraph III.C., below, of this Permit.

  • Well plugging and sealing and site reclamation shall follow the procedures outlined in Sections 2 and 3.

  • The Permittee shall obtain written approval from EPA of any proposed and requested Plugging and Abandonment Plan revisions/ modifications prior to resuming Injection Well plugging and abandonment activities at the Facility.

  • Plugging reports are usually completed by the operator or operator’s agent and must be submitted within a certain time following the conclusion of plugging.In some states a separate affidavit of plugging is Figure 7 Well plugging requirements by numbers of statesrequired if a plug job is not witnessed by agency personnel.

Related to Well plugging

  • Well-logging means all operations involving the lowering and raising of measuring devices or tools that may contain sources of radiation into well-bores or cavities for the purpose of obtaining information about the well or adjacent formations.

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • drilling means the act of boring a hole to reach a proposed bottom hole location through which oil or gas may be produced if encountered in paying quantities, and includes redrilling, sidetracking, deepening, or other means necessary to reach the proposed bottom hole location, testing, logging, plugging, and other operations necessary and incidental to the actual boring of the hole;

  • Water well means an excavation that is drilled, cored, bored, augered, washed, driven, dug, jetted, or otherwise constructed for the purpose of exploring for groundwater, monitoring groundwater, utilizing the geothermal properties of the ground, or extracting water from or injecting water into the aquifer. “Water well” does not include an open ditch or drain tiles or an excavation made for obtaining or prospecting for oil, natural gas, minerals, or products mined or quarried.

  • Oil well means any well capable of producing oil or oil and casinghead gas from a common source of supply as determined by the commission.

  • Deep well means a well located and constructed in such a manner that there is a continuous layer of low permeability soil or rock at least 5 feet thick located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Development Well means a well drilled inside the established limits of an oil or gas reservoir, or in close proximity to the edge of the reservoir, to the depth of a stratigraphic horizon known to be productive.

  • Remediation waste means all solid and hazardous wastes, and all media (including groundwater, surface water, soils, and sediments) and debris that are managed for implementing cleanup.

  • Workover means operations on a producing well to restore or increase production.

  • Gas well means a well producing gas or natural gas from a common source of gas supply as determined by the commission.

  • Test Well means a well constructed for the purpose of obtaining information needed to design a well prior to its construction. Test wells are cased and can be converted to observation or monitoring wells and under certain circumstances to production wells

  • well-being , in relation to individuals, means well-being so far as relating to any of the following—

  • Exploration Well means a well that is not a development well, a service well or a stratigraphic test well.

  • Salvaging means the lawful and controlled removal of reusable materials from solid waste.

  • Exploratory Well means a well that is not a development well, a service well or a stratigraphic test well.

  • Remediation means any response, remedial, removal, or corrective action, any activity to cleanup, detoxify, decontaminate, contain or otherwise remediate any Hazardous Materials, Regulated Substances or USTs, any actions to prevent, cure or mitigate any Release, any action to comply with any Environmental Laws or with any permits issued pursuant thereto, any inspection, investigation, study, monitoring, assessment, audit, sampling and testing, laboratory or other analysis, or any evaluation relating to any Hazardous Materials, Regulated Substances or USTs.

  • Decommissioning means the measures taken at the end of a facility's operating life to assure the continued protection of the public from any residual radioactivity or other potential hazards present at a facility.

  • Horizontal well means a well bore drilled laterally at an angle of at least eighty (80) degrees to the vertical or with a horizontal projection exceeding one hundred (100) feet measured from the initial point of penetration into the productive formation through the terminus of the lateral in the same common source of supply.

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Drill means a response to a planned, simulated event.

  • Shallow well means a well located and constructed in such a manner that there is not a continuous layer of low permeability soil or rock (or equivalent retarding mechanism acceptable to the department) at least 5 feet thick, the top of which is located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • stratigraphic test well means a drilling effort, geologically directed, to obtain information pertaining to a specific geologic condition. Ordinarily, such wells are drilled without the intention of being completed for hydrocarbon production. They include wells for the purpose of core tests and all types of expendable holes related to hydrocarbon exploration. Stratigraphic test wells are classified as (i) "exploratory type" if not drilled into a proved property; or (ii) "development type", if drilled into a proved property. Development type stratigraphic wells are also referred to as "evaluation wells".

  • JOA means the joint operating agreement currently in force in respect of operations pursuant to a Licence and identified as such in Schedule 1;

  • Demolition waste means that solid waste that is produced by the destruction of structures, or their foundations, or both, and includes the same materials as construction waste.

  • Dry well means a type of infiltration practice that allows storm water run-off to flow directly into the ground via a bored or otherwise excavated opening in the ground surface.