Waterproofing membrane definition

Waterproofing membrane means any clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate. Waterproofing Membranes are intended for the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials. Waterproofing Membranes shall meet the following criteria:
Sample 1Sample 2Sample 3
Waterproofing membrane means a clear or opaque coating labeled and formulated for application to concrete and masonry surfaces to provide a seamless coat that prevents any penetration of liquid water into the substrate. These coatings are intended for the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials.
Sample 1Sample 2Sample 3
Waterproofing membrane means a clear or opaque coating that is labeled and formulated to be applied in a single coat of at least 25 mils dry film thickness to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate and that is intended for any of the following waterproofing applications: below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters and under flooring materials. “Waterproofing membrane” does not include topcoats that are concrete or masonry sealer.
Sample 1Sample 2Sample 3

Examples of Waterproofing membrane in a sentence

  • Waterproofing membrane: Styrene-Butadiene-Styrene (SBS) elastomeric polymer, prefabricated sheet, reinforced with non-woven polyester weighing 180 g/m².

  • Waterproofing membrane shall be clamped into place and sealant shall be placed in the caulking recess.

  • The Contractor shall verify that surfaces to which Waterproofing membrane will be applied are sufficiently dry by the following method.

  • Waterproofing membrane shall meet or exceed the requirements contained in ASTM C836/C836M-12, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course.Table 41a-1.

  • Waterproofing membrane manufacturer hereby warrants the membrane and membrane flashings for leak coverage as a result of faulty materials for a period of [5 years] [10 years] [15 years] [20 years] from the date of substantial completion.

  • METHOD OF MEASUREMENT515.06 Waterproofing membrane including protective covering, complete in place, will be measured by the number of square yards of bridge deck covered.

  • Waterproofing membrane manufacturer hereby warrants the membrane and membrane flashings for leak coverage as a result of faulty materials for a period of [5 years] [10 years] [15 years] [20 years] years from the date of substantial completion.

  • Asphalt torch applied Waterproofing membrane at all toilet areas.

  • Mechanically remove curing compounds and form release agents from substrate that adversely affect adhesion of Self-Adhered Sheet Waterproofing membrane.

  • Waterproofing membrane manufacturer hereby warrants that the membrane and membrane flashings for leak coverage as a result of faulty materials or workmanship for a period of [5 years] [10 years] [15 years] [20 years] from the date of substantial completion.


More Definitions of Waterproofing membrane

Waterproofing membrane means a clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate.
Sample 1Sample 2Sample 3
Waterproofing membrane means a clear or opaque coating that is labeled and formulated for application to concrete and masonry surfaces to provide a seamless waterproofing membrane that prevents any penetration of liquid water into the substrate and does not include topcoats in the concrete/masonry sealer category. Waterproofing membranes are intended for below-grade surfaces, between concrete slabs, inside tunnels, inside concrete planters, and under flooring materials. Waterproofing membranes must be applied in a single coat of at least 25 mils (at least 0.025 inch) dry film thickness and meet or exceed the requirements contained in ASTM C836-06 “Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course” (2018).
Sample 1

Related to Waterproofing membrane

  • Floodproofing means any combination of structural and nonstructural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitation facilities, structures, and their contents.

  • Graffiti shall not include: (1) any sign or banner that is authorized by, and in compliance with, the applicable requirements of the San Francisco Public Works Code, the San Francisco Planning Code or the San Francisco Building Code; or (2) any mural or other painting or marking on the property that is protected as a work of fine art under the California Art Preservation Act (California Civil Code Sections 987 et seq.) or as a work of visual art under the Federal Visual Artists Rights Act of 1990 (17 U.S.C. §§ 101 et seq.). Any failure of Contractor to comply with this section of this Agreement shall constitute an Event of Default of this Agreement.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • Structural as herein used means any portion of the Premises or Complex which provides bearing support to any other integral member of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Flashing light means a light flashing at regular intervals at a frequency of 120 flashes or more per minute.

  • Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Duct is a single enclosed path to house facilities to provide Telecommunications Services.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.