Vent shaft definition

Vent shaft means an open, unobstructed passage or duct used to ventilate a bathroom, toilet compartment, kitchen or utility or other service room.
Sample 1Sample 2Sample 3
Vent shaft means a court used only to ventilate or light a water closet, bath, toilet, utility room or other service room.
Sample 1Sample 2

Examples of Vent shaft in a sentence

  • Vent shaft height and size shall be optimized and the same shall be included in the civil scope.

  • This engagement is now urgent regarding the Birchfield Road Vent shaft, which is of deep concern.

  • It is assumed that this alternative proposal would require the use of the Ruislip Vent shaft, which would not be possible without significant modifications to the vent shaft proposal or the Intervention Gap structure.

  • Air QualityRestriction #1: Vent shaft setback, monitoring porthole, and closureVent shafts shall be no closer (setback) than 1,500 ft to any adjoining property line, unless the owner of said location agrees to a lesser setback distance.

  • In particular a 3.6m high hoarding has been installed for the Greenpark Way Vent shaft site, adjacent to the Greenford Mail Centre, and alongside residential communities on Conway Crescent, Perivale.

  • From Vent shaft 5 to entrance of Saulspoort Dam, excluding mini-hydros and Saulspoort dam, and recommend repairs.

  • The following additional Mogul shafts have been identified:• Vent shaft above the Waeltz Plant, Ballygown (capped);• Two vent shafts to the east of the Magcobar pit (to be located during the topographical survey);• Two vent shafts to east of subsidence zone, Gorteenadiha (to be located during the topographical survey);• Vent shaft to west of subsidence zone, Gorteenadiha (capped).

  • Vent shaft No. 9 :Exterior view and cross-sectional view of the structure.

  • Main shaft Compressors Offices Winders: Vent shaft Fan ø8m ø6m Major milestones during the year included the commissioning of the dual purpose winder and the dedicated winder to 132 level for mid-shaft loading from the Kimberley Reef section.

  • Present shoulder construction and experience with shoulder stability in the immediate area.

Related to Vent shaft

  • shaft means an excavation having a longitudinal axis at an angle greater than forty-five degree from the horizontal—

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Smoke detector means a device which detects particles or products of combustion other than heat.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Metering Equipment means all metering equipment installed at the metering points designated in the appropriate appendix to an Interconnection Service Agreement. Minimum State of Charge:

  • Net metering period means the 12-month period following the date of final interconnection of the

  • Heating fuel means fossil-based heating fuel, including oil,

  • Valve means a device used to control the flow of water in the irrigation system.

  • Radiation detector means a device which in the presence of radiation provides a signal or other indication suitable for use in measuring one or more quantities of incident radiation.

  • Connected piping means all underground piping including valves, elbows, joints, flanges, and flexible connectors attached to a tank system through which regulated substances flow. For the purpose of determining how much piping is connected to any individual UST system, the piping that joins two UST systems should be allocated equally between them.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Boiler Fuel means natural gas used as fuel for the generation of steam and in internal combustion turbine engines for the generations of electricity.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Cooling curve means the graphical relationship between heat units stored and cooling time.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Improvement warranty period means a period:

  • Paint remover or stripper means any product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate. “Paint Remover or Stripper” does not include “Multi-purpose Solvent,” paint brush cleaners, products designed and labeled exclusively as “Graffiti Remover,” and hand cleaner products that claim to remove paints and other related coatings from skin.