Vehicle Standards definition

Vehicle Standards means the Road Traffic (Vehicle Standards) Regulations 2002 and the Road Traffic (Vehicle Standards) Rules 2002;
Sample 1Sample 2Sample 3
Vehicle Standards means the standards for registration described in clause 1 of Schedule 2;
Sample 1
Vehicle Standards means the Road Traffic (Vehicle Standards) Rules 2002.(2) Unless the context requires otherwise, a reference in these regulations to the visibility of a light is a reference to itsRoad Traffic (Bicycles) Regulations 2002 r. 4 visibility, or its capacity to be visible, under normal atmospheric conditions, at any time between sunset and sunrise.4. ApplicationThese regulations apply to a bicycle if it is on a road.5. Adaptations for bicycle riders with physical disabilitiesIf the Director General believes that a person with a physical disability cannot safely ride a bicycle unless the bicycle is constructed, equipped or adapted in a particular manner, the Director General may, by notice in writing to the person with the disability and the owner of the bicycle, vary these regulations in so far as they apply to the bicycle while it is being ridden by the person with the disability, by requiring that the bicycle be constructed, equipped or adapted accordingly.6. BrakesA bicycle must be capable of being braked by either or both of the following means —
Sample 1

Examples of Vehicle Standards in a sentence

  • The number of faculty members so requested shall constitute a majority minus one for specific committees related to academic issues, such as the search for deans.

  • It should be noted that as policing and criminal justice is not a devolved matter, the Statutory Taxi and Private Hire Vehicle Standards issued under the Policing and Crime Act 2017 will continue to have effect in Wales although responsibility for taxi and private hire vehicle policy was devolved to the Welsh Assembly in April 2018.

  • The Department has carefully considered the measures contained in the Statutory Taxi and Private Hire Vehicle Standards and recommend that these should be put in to practice and administered appropriately to mitigate the risk posed to the public.

  • The term ‘private hire vehicle’ is used throughout this document to refer to all such vehicles.2. Consideration of the Statutory Taxi and Private Hire Vehicle Standards The past failings of licensing regimes must never be repeated.

  • A person may, in accordance with rule 148(2) of the Road Traffic (Vehicle Standards) Rules 2002, affix to an identification tablet or number plate that has been issued to him by the Director General a label indicating that the vehicle to which the identification tablet or number plate is fixed uses Liquefied Petroleum Gas as fuel.

  • The fee payable for an application under the Road Traffic (Vehicle Standards) Regulations 2002 regulation 42 is $50.

  • The fee payable for the issue or renewal of an accreditation certificate for the purposes of the Road Traffic (Vehicle Standards) Regulations 2002 regulation 23 is $225.

  • This policy is based on the Statutory Taxi and Private Hire Vehicle Standards issued by the Department of Transport in July 2020, Annex - Assessment of Previous Convictions.

  • Consideration of the Statutory Taxi and Private Hire Vehicle Standards 63.

  • Declaration as to immobiliser A person applying for the grant or transfer of a licence for a motor vehicle to which rule 176 of the Road Traffic (Vehicle Standards) Rules 2002 applies, must declare in writing, at the time of making the application, whether the vehicle complies with that rule.


More Definitions of Vehicle Standards

Vehicle Standards means the Road Traffic (Vehicle Standards) Rules 1999; "warning light" means a light that complies with the specifications in Part 7; "warning sign" means a sign that complies with Part 8;
Sample 1
Vehicle Standards means the vehicle standards under the Road Traffic Act 1961. (2) For the purposes of this Part, a heavy vehicle is to be taken to have been involved in a relevant speeding offence if—
Sample 1

Related to Vehicle Standards

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Service Standards means the set of Service Measures, Service Levels, conditions and Service Guarantee Payments as set out in Schedule 1;

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Operating Standards shall have the meaning given such term in Section 2.1.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Servicing Standards As defined in Section 3.01(a).

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • PREVENTIVE CARE SERVICES means covered healthcare services performed to prevent the occurrence of disease as defined by the Affordable Care Act (ACA). See Preventive Care and Early Detection Services in Section 3. PRIMARY CARE PROVIDER (PCP) means, for the purpose of this plan, professional providers that are family practitioners, internists, and pediatricians. For the purpose of this plan, gynecologists, obstetricians, nurse practitioners, and physician assistants may be credentialed as PCPs. To find a PCP or check that your provider is a PCP, please use the “Find a Doctor” tool on our website or call Customer Service.

  • Municipal Systems Act means the Local Government: Municipal Systems Act, 2000 (Act No. 32 of 2000);

  • Clean air standards, as used in this clause, means:

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Centers for Medicare and Medicaid Services or “CMS” means the federal office under the Secretary of the United States Department of Health and Human Services, responsible for the Medicare and Medicaid programs.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Performance Standards or “PS” shall mean the cleanup levels and other measures of achievement of the remedial action objectives, as set forth in the ROD.