Utilization Standards definition

Utilization Standards means an operational target for facilities or services that may demonstrate operational efficiencies, minimum proficiency or other performance parameters. Utilization standards and their purposes are established by category of service. Utilization may be expressed by various ratios, such as facility or bed service occupancy rates or hours of use for types of equipment, operating rooms, dialysis stations, etc.
Sample 1Sample 2Sample 3
Utilization Standards means the utilization standards established by the director under section 9 that apply in respect of the timber harvested under a timber disposition.
Sample 1
Utilization Standards means an operational target for facilities or services that may demonstrate operational efficiencies, minimum proficiency or other
Sample 1

Examples of Utilization Standards in a sentence

  • All trees that meet Utilization Standards within “Clearcutting Units” are designated for cutting.

  • Pieces meeting Utilization Standards from such dead or unstable live trees shall be removed, unless there is agreement that to do so could damage the road.

  • All trees within “Understory Removal Units” are designated for cutting when they meet Utilization Standards and are smaller than the diameter limits shown on Sale Area Map.

  • All trees within “Overstory Removal Units” are designated for cutting when they meet Utilization Standards and equal or exceed the diameter limits shown on Sale Area Map.

  • Purchaser may buck out cull material when necessary to produce pieces meeting Utilization Standards.

  • Un- designated timber meeting Utilization Standards and un- necessarily damaged or negligently or willfully cut by Pur- chaser, if included by Contracting Officer.

  • In consideration for granting an extension, Purchaser shall pay the Government for Purchaser’s failure to cut and remove timber meeting Utilization Standards prior to Contract Term Extension, an amount that shall be the total of the costs to the Government resulting from the delay in harvest of Included Timber.

  • The estimated volumes of timber by species designated for cutting under B2.3 and expected to be cut under Utilization Standards are listed in A2.

  • Incidental amounts of products or portions of trees of species listed in A2 that do not meet Utilization Standards may be removed without charge.

  • As pro- vided under B8.32, undesignated live and dead timber within Sale Area, meeting Utilization Standards, and af- fected by Catastrophic Damage.

Related to Utilization Standards

  • Generally applicable environmental radiation standards means standards issued by the U.S. Environmental Protection Agency (EPA) under the authority of the Atomic Energy Act of 1954, as amended, that impose limits on radiation exposures or levels, or concentrations or quantities of radioactive material, in the general environment outside the boundaries of locations under the control of persons possessing or using radioactive material.

  • Network Connection Standards means the Distributor’s written technical and safety standards for connection of an Electrical Installation to the Network that are issued by the Distributor and updated from time to time, and include:

  • Availability Standards has the meaning set forth in the CAISO Tariff.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Emission standard means specified limitations on the discharge of air contaminants into the atmosphere.

  • Good Laboratory Practices or “GLP” means the then-current good laboratory practice standards promulgated or endorsed by the FDA, as defined in U.S. 21 C.F.R. Part 58 (or such other comparable regulatory standards in jurisdictions outside the United States, as they may be updated from time to time).

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Benchmarks Regulation means Regulation (EU) 2016/1011 of the European Parliament and of the Council of 8 June 2016 on indices used as benchmarks in financial instruments and financial contracts or to measure the performance of investment funds and amending Directives 2008/48/EC and 2014/17/EU and Regulation (EU) No 596/2014;

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Modernization means the replacement and upgrading of existing facilities which increases the productive input or output, updates the technology or substantially lowers the unit cost of the operation. Modernization may result from the construction, alteration or installation of buildings, structures, fixed machinery or equipment. It shall not be for the purpose of reconditioning, refurbishing, or repairing.

  • Good Laboratory Practice or “GLP” means the applicable then-current standards for laboratory activities for pharmaceuticals (including biologicals) or vaccines, as applicable, as set forth in the Act and any regulations or guidance documents promulgated thereunder, as amended from time to time, together with any similar standards of good laboratory practice as are required by any Regulatory Authority having jurisdiction over the applicable activity.

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Uniform standard means a standard adopted by the Commission for a Product line, pursuant to Article VII of this Compact, and shall include all of the Product requirements in aggregate; provided, that each Uniform Standard shall be construed, whether express or implied, to prohibit the use of any inconsistent, misleading or ambiguous provisions in a Product and the form of the Product made available to the public shall not be unfair, inequitable or against public policy as determined by the Commission.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Service Standards means the set of Service Measures, Service Levels, conditions and Service Guarantee Payments as set out in Schedule 1;