Unmetered Load means electricity consumed on the Network that is not directly recorded using Metering Equipment, but is calculated or estimated in accordance with the Code;
Metered Quantity means apparent power, reactive power, active power, with associated time tagging and any other quantity that may be measured by a Party’s Metering Equipment and that is reasonably required by either Party for Security reasons or revenue requirements.
Cleanup costs means expenses (including but not limited to legal and professional fees) incurred in testing for, monitoring, cleaning up, removing, containing, treating, neutralizing, detoxifying or assessing the effects of Pollutants.
Routine patient care costs means Covered Medical Expenses which are typically provided absent a clinical trial and not otherwise excluded under the Policy. Routine patient care costs do not include:
Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.
Dosimetry processor means an individual or an organization that processes and evaluates individual monitoring devices in order to determine the radiation dose delivered to the monitoring devices.
Decontamination means a process that attempts to remove or reduce to an acceptable level a contaminant exceeding an allowable threshold set forth in these Rules in a harvest batch or production batch.
Training costs means reasonable costs incurred to upgrade the technological skills of Full-Time Employees in Illinois and includes: curriculum development; training materials (including scrap product cost); trainee domestic travel expenses; instructor costs (including wages, fringe benefits, tuition and domestic travel expenses); rent, purchase or lease of training equipment; and other usual and customary training cots. “Training costs” do not include, except where the Company receives prior written approval of the Department, costs associated with travel outside the United States, wages and fringe benefits of employees during periods of training, administrative costs related to Full-Time Employees of the Taxpayer, or amounts paid to an affiliate of the Company.
Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.
Generator Operator means the Person that Operates the Generating Facility and performs the functions of supplying electric energy and interconnected operations services within the meaning of the NERC Reliability Standards.
Metered Energy means the quantity of electric energy, expressed in kWh, as measured by (i) the CAISO-Approved Meter(s), which quantity will be adjusted so as not to include compensation factors, if any, introduced by the CAISO into the CAISO-Approved Meter(s) other than (x) electric energy consumed within the generator collection system as losses between the generator(s) and the high voltage side of the Generating Facility output transformer(s) and, (y) if applicable, the Generating Facility’s radial line losses, or (ii) Check Meters, as applicable, in each case for the specified Metering Interval.
Reagent means any product other than fuel that is stored on-board the vehicle and is provided to the exhaust after-treatment system upon request of the emission control system.
Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.
Extra Work means any work which is determined by City to be necessary for the proper completion of the Project, but which the Parties did not reasonably anticipate would be necessary at the execution of this Agreement. Consultant shall not perform, nor be compensated for, Extra Work without written authorization from City’s Representative.
Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.
Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.
Subprojects means more than one such Subproject.
Respiratory protective equipment means an apparatus, such as a respirator, used to reduce an individual's intake of airborne radioactive materials.
Manufacturing Costs means the costs of Processing that generate Manufacturing Proceeds received by Grantor.
Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.
The Contract Price/Project Cost means the price payable to the Vendor under the Contract for the full and proper performance of its contractual obligations.
Manufacturing Cost means [***].
Residual Metered Load means all load remaining in an electric distribution company’s fully metered franchise area(s) or service territory(ies) after all nodally priced load of entities serving load in such area(s) or territory(ies) has been carved out.
Supplies means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the DoD at the time of transportation by sea.
Start-Up Costs means all fees, costs, and expenses incurred in connection with establishing the State Mitigation Trust and the Indian Tribe Mitigation Trust and setting them up for operation. Start-up costs shall not include the cost of premiums for insurance policies.
Consumables means where the context permits, Digital Print Consumables, Inkjet Printing System Consumables and Prepress Consumables.