Tolerance zone definition

Tolerance zone means 24 inches on each side of the field marking placed by the operator in one of the following ways:

Tolerance zone means the horizontal space within eighteen

Tolerance zone means the horizontal space within eighteen inches of the outside wall or edge of a line or facility.

Examples of Tolerance zone in a sentence

• Figure 5-34 Tolerance zone for straightness control RFS As you can imagine, deriving a median line or plane is a complex procedure that’s extremely difficult without the help of a microprocessor-based machine.

• Process Capability Indices Cp, Cpk, Pp, Ppk are the various capability indices have been developed in an attempt to quantify process capability in a single number.Cp = Tolerance zone / 6σ, where tolerance zone = USL-LSL Cpk = Min(Zu, Zl)/3, where min(Zu,Zl) is defined as the smallest Z value.

• We use this method for a final containment fit.• Tolerance zone representation module, representing tolerance zone as a function of nominal geometry.

• Tolerance zone of electronic services, which is less than the one of real services as well as expectations, determine quality evaluation changes.

• Tolerance zone" means the area notless more than 24 inches of the outside dimensions in all horizontal directions of an underground facility, except that a larger tolerance zone for a tier 1, 2 or 3 facility may be established by rules and regulations adopted under K.S.A. 66- 1815, and amendments thereto.

More Definitions of Tolerance zone

Tolerance zone means the area surrounding a facility that:

Tolerance zone means 24 inches from the outer edge of either side of the exterior surface of a marked underground facility.

Tolerance zone means the range of Imbalances within an Account where it is considered to be in balance without action being taken to adjust receipts into or deliveries from that Account;

Tolerance zone means the area within 24 inches surrounding the outside dimensions of all sides of an underground facility.

Tolerance zone means the site of the underground utility facility including the width of the underground utility facility plus eighteen inches on each side of the facility.

Tolerance zone means the area within 24 inches surrounding the outside dimensions of all sides of an underground facility. (See Tolerance Zone illustration below.)

Tolerance zone means the area within 24 inches of the outside dimensions in all horizontal directions of an underground facility.