Test speed definition

Test speed means the vehicle speed measured the moment the driver begins to actuate the brake control(s). For tests where the simultaneous actuation of two controls is specified, the vehicle speed is taken from the point the first control is actuated.
Test speed means the vehicle speed measured at the moment of application of the brake control(s).
Test speed means the vehicle speed measured the moment the rider begins to actuate the brake control. For tests where simultaneous actuation of two controls is specified, the vehicle speed is taken from the moment the first control is actuated.

Examples of Test speed in a sentence

  • UNIT – II, DC MACHINES:Principle of operation of DC generator – emf equation - types – DC motor types –torque equation – applications – three point starter, swinburn’s Test, speed control methods.

  • Test speed is 0.8 Vmax for motorcycles with Vmax > 125 km/h and < 200 km/h.

  • Test speed Vehicle speed at the moment of impact shall be 50 -0/ +1 km/h.

  • Test speed is 100 km/ h or 0.9 Vmax, whichever is lower.(c) Brake application.

  • Test speed is 160 km/h for motorcycles with Vmax≥ 200 km/h.(c) Brake application.

  • Test speed is 50 km/h and 100 km/h or 0.8 Vmax, whichever is lower.(c) Brake actuation force.

  • Low friction - Initial brake temperature: ≥ 55 °C and ≤ 100 °C - Test speed: (a) On high friction surface: 80 km/h or 0.8 Vmax, whichever is lower.

  • UNIT - IIDC MACHINES :Principle of operation of DC generator – emf equation - types – DC motor types –torque equation – applications – three point starter, swinburn’s Test, speed control methods.

  • Test conditions and procedure - Initial brake temperature : ≥ 55 °C and ≤ 100 °C - Test speed: 60 km/h or 0.9 Vmax, whichever is the lower.

  • Test speed and gear selection The vehicle shall be tested at the operating conditions as described in paragraph 3.1.2.2. of Annex 3.


More Definitions of Test speed

Test speed means the vehicle speed measured at the moment of application of the brake control(s). When tests are conducted with simultaneous application of two controls, the control applied first is considered as the moment of application of the control.

Related to Test speed

  • Invasive plant species means species of plants not historically found in California that spread outside cultivated areas and can damage environmental or economic resources. Invasive species may be regulated by county agricultural agencies as noxious species. Lists of invasive plants are maintained at the California Invasive Plant Inventory and USDA invasive and noxious weeds database.

  • Test Plan means a plan for the Testing of the or Deliverables and other agreed criteria related to the achievement of Milestones as described further in paragraph 4 of Call Off Schedule 4;

  • Test cycle means a sequence of test points each with a defined speed and torque to be followed by the engine under steady state (WHSC) or transient operating conditions (WHTC).

  • Contract Specific Goals means the subcontracting goals for MBE and WBE participation established for a particular contract.

  • Test Fail has the meaning stated in Section 3.4(a).

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • SRS means the scheme referred to by the Ministry of Finance as the Supplementary Retirement Scheme or such other scheme as shall replace or supersede the Supplementary Retirement Scheme from time to time.

  • Test Complete has the meaning stated in Section 3.4(c).

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Pilot or "Payment in Lieu of Tax" shall mean any payment made to the Agency or an affected tax jurisdiction equal to all or a portion of the real property taxes or other taxes which would have been levied by or on behalf of an affected tax jurisdiction with respect to a project but for tax exemption obtained by reason of the involvement of the Agency in such project, but such term shall not include Agency fees.

  • Autocycle means the same as that term is defined in Section 53-3-102.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Baseline data means information gathered at a selected point in time and used thereafter as a basis from which to monitor change.

  • Wind Turbine means a mechanical/electrical system that converts the kinetic energy of blowing wind into mechanical or electric power.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Filter profile means a graphical representation of individual filter performance, based on continuous turbidity measurements or total particle counts versus time for an entire filter run, from startup to backwash inclusively, that includes an assessment of filter performance while another filter is being backwashed.