Examples of Test Samples in a sentence
The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples – Do Not Post to Stock," Contract Number [ contractor insert] and Lot/Item Number [contractor insert]” adjacent to the MIL-STD-129 (latest revision) identification markings.
If the average aflatoxin level of Test Samples #1 and #2 is above 15 ppb, the lot fails and the laboratory shall fill out an Imported Pistachios—Failed Lot Notification report (Form FV–249).
Selection of Production Test Samples Not very often does a specification call for production test samples of field welding, but it does happen on occasions and therefore the inspector must have an idea of what is expected in taking these samples.
If the aflatoxin level of Test Sample #1 is above 10 ppb and at or below 20 ppb, the laboratory may, at the importer’s discretion, analyze Test Sample #2 and average the test results of Test Samples #1 and #2.
If the proper protocol was used, your measurement system may not be suitable for MPA-preserved samples; please contact us at 301- 975-3120 or jbthomas@NIST.gov.Do not analyze the test samples until you are satisfied that your system is performing properly and is suitable for the analysis of MPA-preserved serum! Protocol for Analysis of the Serum Control Materials and Test Samples The serum control material and test samples are in sealed ampoules.
Edwards, Statistical Analysis of ESP Verification Test Samples, WSRC- RP-94-1224, Rev.
If the importer directs the laboratory to proceed with the analysis of Test Sample #2, a lot will be certified as negative to aflatoxin and the laboratory shall issue an aflatoxin inspection certificate if the averaged result of Test Samples #1 and #2 is at or below 15 ppb.
If the importer directs the laboratory to proceed with the analysis of Test Sam- ple #2, a lot will be certified as nega- tive to aflatoxin and the laboratory shall issue an aflatoxin inspection cer- tificate if the averaged result of Test Samples #1 and #2 is at or below 15 ppb.
Summary of Quality Control and Contaminant Test Samples Type of SampleSample Characteristics Concentration Levels NA = not applicable, samples not fortified with any preservative, contaminant, or potential interference.
New Approval Applications must contain or reference the following items as described in detail in Sections 2 and 3 of this SAP.• NIOSH Standard Application Form.• Pretest Data.• Simplified Drawings.• Assembly Matrix.• Draft Approval Label(s).• Quality Assurance Manual (Manual to be submitted separately as a QA Application after first approval).• Product Quality Control Plan.o Classification of Defects Document.o Sampling Plan.• Application Fee, $200.• User Instructions.• Test Samples (Hardware).