Test engine definition

Test engine means any engine used in certification, production line testing, quality audit, or compliance testing. A test engine can be a prototype engine or a production engine depending on the testing program in which it is used.
Sample 1Sample 2Sample 3
Test engine means the engine or group of engines that an engine manufacturer uses during certification, production-line and in-use testing to determine compliance with emission standards.
Sample 1Sample 2Sample 3
Test engine means an engine in a test sample.
Sample 1Sample 2Sample 3

Examples of Test engine in a sentence

  • Test engine generator set manufactured for this Project to demonstrate compatibility and functionality.

  • Test engine must support the following functionalities apart from other functions.

  • Test engine protective and automatic shutdown devices, where applicable, low oil pressure, low coolant level, high coolant temperature, over‐speed, etc.

  • All work shall be performed in accordance with Section 02110 - Clearing and Grubbing of the Charles County Department of Planning and Growth Management, Standard Specifications for Construction, dated May 1996.

  • Test engine description must list the engine family name, make, model, model year, horsepower, displacement, OEM configuration with all exhaust components identified by OEM part number, engine serial number, and PM and NOx certification levels.

  • Steady Load Test: Test engine generator set at steady load run of 60 minutes minimum duration at 100 percent full-rated load.

  • Test engine selection: was selection in accordance with regulations?6.

  • Test engine and vehicle must be identified by the engine family name, make, model, model year, engine serial number, horsepower, PM and NOx certification levels, and vehicle manufacturer, model and vehicle identification number.

  • Test engine start circuits, time delay circuits, status points, and system control points.

  • For the mixed intake gas, Cylinders Table 1: Engine characteristics F Air filterF H2 flow meterAir flow meterH2 buffer vesselRHThrottle valveBuffer vesselRHTWCH2 injectionBypass valveCompressorIntercoolerRHBuffer vesselMixing section EGR valve EGR cooler Figure 3: Test engine layout with indicated measuring places for relative humidity (RH) the relative humidity is measured using a capacitive humidity sensor (Honeywell HIH-4000).


More Definitions of Test engine

Test engine is the SaaS subscription service provided by the Supplier which automatically executes tests defined in the Controller application. Also called the AutomatePro Test Engine (ATE).
Sample 1

Related to Test engine

  • Test Energy means any Net Output during periods prior to the Commercial Operation Date and related Capacity Rights.

  • Stand-Alone Test Environment or "SATE" shall have the meaning set forth in Section 12.2.9.3.2.

  • aircraft engines means aircraft engines (other than those used in military, customs or police services) powered by jet propulsion or turbine or piston technology and:

  • Test Plan means a plan for the Testing of the or Deliverables and other agreed criteria related to the achievement of Milestones as described further in paragraph 4 of Call Off Schedule 4;

  • Collateral Quality Test A test satisfied as of the Effective Date and any other date thereafter on which such test is required to be determined hereunder if, in the aggregate, the Collateral Obligations owned (or in relation to a proposed purchase of a Collateral Obligation, both owned and proposed to be owned) by the Issuer satisfy each of the tests set forth below (or, after the Effective Date, if any such test is not satisfied at the time of reinvestment, the level of compliance with such test is maintained or improved as described in the Investment Criteria):

  • Collateral Quality Tests means the Collateral Quality Tests set out in the Investment Management Agreement being each of the following:

  • Discharge Monitoring Report or "DMR" means the EPA uniform national form, including any subsequent additions, revisions, or modifications, for the reporting of self-monitoring results by permittees.

  • Diesel engine means an internal combustion, compression-ignition (CI) engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Test Fail has the meaning stated in Section 3.4(a).

  • Test Complete has the meaning stated in Section 3.4(c).

  • Test cycle means a sequence of test points each with a defined speed and torque to be followed by the engine under steady state (WHSC) or transient operating conditions (WHTC).

  • Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.

  • Financial Monitoring Report or “FMR” means each report prepared in accordance with Section 4.02 of this Agreement;

  • Test Report means a written report issued by The Sequoia Project that documents the outcomes of the Testing Process; that is, the Applicant’s compliance with the Specifications and Test Materials.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Acceptance Test Document means a document, which defines procedures for testing the functioning of installed system. The document will be finalized with the contractor within 7 days of issuance of the Letter of Award.

  • Integrated resource plan means a plan which contains the demand and energy forecast for at least a fifteen‑year period, contains the supplier’s or producer’s program for meeting the requirements shown in its forecast in an economic and reliable manner, including both demand‑side and supply‑side options, with a brief description and summary cost‑benefit analysis, if available, of each option which was considered, including those not selected, sets forth the supplier’s or producer’s assumptions and conclusions with respect to the effect of the plan on the cost and reliability of energy service, and describes the external environmental and economic consequences of the plan to the extent practicable. For electrical utilities subject to the jurisdiction of the South Carolina Public Service Commission, this definition must be interpreted in a manner consistent with the integrated resource planning process adopted by the commission. For electric cooperatives subject to the regulations of the Rural Electrification Administration, this definition must be interpreted in a manner consistent with any integrated resource planning process prescribed by Rural Electrification Administration regulations.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Internal combustion engine or ‘engine’ means an energy converter, other than a gas turbine, designed to transform chemical energy (input) into mechanical energy (output) with an internal combustion process; it includes, where they have been installed, the emission control system and the communication interface (hardware and messages) between the engine's electronic control unit(s) and any other powertrain or non-road mobile machinery control unit necessary to comply with Chapters II and III;

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Root Cause Analysis Report means a report addressing a problem or non-conformance, in order to get to the ‘root cause’ of the problem, which thereby assists in correcting or eliminating the cause, and prevent the problem from recurring.

  • Stationary internal combustion engine means a spark or compression ignited, reciprocating internal combustion engine which is not a portable emission unit.