Temperature sensor definition

Temperature sensor means a thermometer or thermocouple used to measure temperature.
Sample 1Sample 2Sample 3
Temperature sensor means a thermometer or thermo- couple used to measure temperature.
Sample 1Sample 2
Temperature sensor means a thermometer, potentiometer with thermocouple, or other temperature sensing device calibrated with an approved standard.
Sample 1Sample 2Sample 3

Examples of Temperature sensor in a sentence

  • Table 2: Gaging System Components Component Quantity Transmitter 139 Repeater 6 Rain Sensor 129 Stage Sensor 76 Wind Sensor 16 Relative Humidity Sensor 16 Temperature Sensor 16 Solar Radiation Sensor 1 Barometric Pressure Sensor 4 Fuel Moisture & Temperature 2 OneRain proposes to evaluate these maintenance procedures for the equipment listed in Table 2 above over the course of the 2005 season.

  • COVERED: Main Control Board, Fan Motor, Thermistor, Inverter, Compressor, High Limit Thermostat, Temperature Control Thermostat, Temperature Sensor, Defrost Thermostat, Defrost Heater Assembly, Defrost Timer, Evaporator Fan Motor, Y Clip, Snap Retaining Ring, Start Relay, Damper Control Assembly, Fan Blade, Start Device.

  • Suspension R&R Single Shock .25 Hours A-Arms R&R Each .25 Hours Bed Frame R&R 1 Hour Complete Frame R&R 12 Hours Roll Cage R&R 0.75 Hours Front Bumper R&R 0.5 Hours Electrical System Battery R&R 0.5 Hours Wire harness R&R 2 Hours Lights R&R (Headlights, Taillights) 0.25 Hours Electrical Switch R&R 0.25 Hours Power Steering R&R 1 Hour Speedometer R&R 0.25 Hours ECM R&R 1 Hour Sensor R&R (Vehicle Speed Sensor, Temperature Sensor, Crank Position Sensor, Map Sensor, Fuel sensor) etc..

  • COVERED: Bake Element, Element Receptacle and Wire Kit, Valves, Sensors, Spark Electrode, Surface Element Switch, Coil Surface Element, Surface Burner, Oven Control Board, Temperature Sensor, Manifold Transformer, Diode.

  • The following is a complete list of parts covered by the Customer’s Xxxxxxx Home Protection Cooling Plan: • Add-on Fan Centres • Capacitor • Line Components • Internal Copper Tubing • Low Ambient Temperature Sensor • Add-on Indoor Fan Relay • Cooling Contractor/Relay • Evaporator Coil • Internal Electric/Wiring • Condenser Fan Motor • Thermostat • Fan Blade Natural gas powered, ductless, wall unit, heat pump and high velocity air conditioning units are not eligible for coverage.

  • The purpose of the recall is to remedy a safety related defect by installing a High Temperature Sensor (HTS).

  • Suspension R&R Single Shock .25 Hours A-Arms R&R Each .25 Hours Bed Frame R&R 1 Hour Complete Frame R&R 12-14 Hours Roll Cage R&R 0.75 Hours Front Bumper R&R 0.5 Hours Electrical System Battery R&R 0.5 Hours Wire harness R&R 2 Hours Lights R&R (Headlights, Taillights) 0.25 Hours Electrical Switch R&R 0.25 Hours Power Steering R&R 1 Hour Speedometer R&R 0.25 Hours ECM R&R 1 Hour Sensor R&R (Vehicle Speed Sensor, Temperature Sensor, Crank Position Sensor, Map Sensor, Fuel sensor) etc..

  • Table 7: Smart Router - MoC Component Equipment Type Means of Communication 1 Intelligent Temperature Sensor IPv6 2 Local Data Server (CMS) IPv6 3 Safety Server IPv6 Figure 11: Safety Server as EUT (AA_SafetyServer) Putting the Safety Server into focus, Figure 11 shows several communication dependencies that need to be validated with respect to the chosen scenario.

  • Table 6: Intelligent Temperature Sensor - MoC Component Equipment Type Means of Communication Figure 10: Smart Router as EUT (AA_SmartRouter) The Smart Router component as EUT (Figure 10) is responsible for distributing messages according to their tagging in an IoT6 network.

  • An Intelligent Temperature Sensor reads the temperature and performs a tagging of noncritical and critical temperatures according to a predefined threshold.


More Definitions of Temperature sensor

Temperature sensor means a device that measures temperature by employing an electrical signal;
Sample 1Sample 2Sample 3
Temperature sensor means a thermometer or thermocouple used to measuretemperature.
Sample 1
Temperature sensor has the meaning set out in Section 40 90 02 of Appendix 6-2 [Technical Specifications];
Sample 1

Related to Temperature sensor

  • indenture securities means the Notes.

  • Capture system means all equipment (including, but not limited to, hoods, ducts, fans, booths, ovens, dryers, etc.) that contains, collects, and transports an air pollutant to a control device.

  • Fire Service means any deployment of firefighting personnel and/or equipment to extinguish a fire or perform any preventative measure in an effort to protect equipment, life, or property in an area threatened by fire. It also includes the deployment of firefighting personnel and/or equipment to provide fire suppression, rescue, extrication, and any other services related to fire and rescue as may occasionally occur.

  • Indenture Secured Parties means the Noteholders.

  • indenture security holder means a Noteholder.

  • indenture securityholder means a Holder or Securityholder.

  • other indenture securities means securities upon which the Company is an obligor outstanding under any other indenture (i) under which the Trustee is also trustee, (ii) which contains provisions substantially similar to the provisions of this Section, and (iii) under which a default exists at the time of the apportionment of the funds and property held in such special account.

  • Permitted Cure Security means an equity security of the Borrower having no mandatory redemption, repurchase or similar requirements prior to 91 days after the Latest Maturity Date of all Classes of Loans or Commitments, and upon which all dividends or distributions (if any) shall be payable solely in additional shares of such equity security.

  • obligor on the indenture securities means the Company. All other terms used in this Indenture that are defined by the TIA, defined in the TIA by reference to another statute or defined by SEC rule have the meanings therein assigned to them.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • indenture to be qualified means this Indenture.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • NACE means National Association of Corrosion Engineers

  • Cabinet radiography means industrial radiography conducted in an enclosure or cabinet shielded so that radiation levels at every location on the exterior meet the limitations specified in 641—40.26(136C).

  • Emitter means a drip irrigation emission device that delivers water slowly from the system to the soil.

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Electrostatic application means the application to a substrate of charged atomized paint droplets that are deposited by electrostatic attraction.

  • Tomographic plane means that geometric plane which is identified as corresponding to the output tomogram.

  • Sediment means solid material, mineral or organic, that is in suspension, is being transported, or has been moved from its site of origin by air, water or gravity as a product of erosion.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • MECOD refers to the Multiple Exchange Carriers Ordering and Design Guidelines for Access Services - Industry Support Interface, a document developed by the Ordering/Provisioning Committee of the OBF, which functions under the auspices of the CLC of ATIS. The MECOD document, published by ATIS as ATIS/OBF- MECAB- Issue 3, February 1993, establishes methods for processing orders for access service which is to be provided to an IXC by two or more telecommunications providers.

  • Sedimentation means a process for removal of solids before filtration by gravity or separation.

  • Leak-detection system means a system capable of detecting the failure of either the primary or secondary containment structure or the presence of a release of hazardous waste or accumulated liquid in the secondary containment structure. Such a system must employ operational controls (e.g., daily visual inspections for releases into the secondary containment system of aboveground tanks) or consist of an interstitial monitoring device designed to detect continuously and automatically the failure of the primary or secondary containment structure or the presence of a release of hazardous waste into the secondary containment structure.

  • Core Services means the services described in the Main Agreement that BNYM is obligated to perform for Company (for clarification: excluding the products and services provided pursuant to this Schedule C).