Technical Characteristics definition

Technical Characteristics means the physical, electrical and other relevant characteristics and the network interworking and service management protocols.
Sample 1Sample 2Sample 3
Technical Characteristics means a set of technical parameters describing the technical capabilities of the Plant, including (a) minimum capacity for stable operation,(b) ramping speed for increasing and decreasing production capacity, and (c) minimum up-time and minimum down-time. Technical Characteristics shall be more fully described in the Operations Manual. For the avoidance of doubt, Technical Characteristics shall not include the Anticipated Available Capacity.
Sample 1Sample 2
Technical Characteristics. The information published on the page xxxx://xxxxx.xxxxx.xx/login.aspx containing the technical characteristics of the Service. Terms and Conditions: these Terms and Conditions for the supply of the Xxxxx.xx Hosting service.
Sample 1Sample 2

Examples of Technical Characteristics in a sentence

  • U.S. Congressional Budget Office, Estimated Costs and Technical Characteristics of Selected Missile Defense Systems, Jan.

  • ITU–R Recommendation M.540–2 (‘‘ITU–R M.540–2’’), ‘‘Operational and Technical Characteristics for an Auto- mated Direct-printing Telegraph Sys- tem for Promulgation of Navigational and Meteorological Warnings and Ur- gent Information to Ships,’’ including Annexes, 1990, IBR approved for §§ 80.905, 80.1101, and 80.1135.

  • There are other forms of internal control of the police represented in the Ministry of Internal Affairs of the Republic of Serbia, namely: control by means of disciplinary accountability, control as to the use of force (the Rulebook on the Technical Characteristics and Methods of Use of Force was developed, envisaging the creation of the Commission for Examining the Justification for the Use of Force), hierarchy and other types of control.

  • Selected Technical Characteristics of the Airport Surveillance Radar.

  • The Line Rates for the WFLLA FTTC Service are as set out in the Wholesale FibreLine Local Access Technical Characteristics document (CIP040) and for any individual connection will depend on the service option the CP has specified on the Order.

  • The Line Rates for the WFL FTTC Service are as set out in the Wholesale FibreLine Access Technical Characteristics document (CIP037) and for any individual connection will depend on the service option the CP has specified on the Order.

  • NTIA employed an I/N protection criterion of –10 dB, indicating that this level is contained in a proposed revision to ITU-R M.1313-1 under consideration by ITU-R Study Group 8 and entitled, Technical Characteristics of Maritime Radionavigation Radars.

  • To prevent cycles and guarantee deadlock freedom, all the remaining pairs which end in this link type and are still blank, are marked as Not allowed.

  • The first Lower Level Liaison Committee (LLLC) Encapsulation Plant and Geological Repository (EPGR) Liaison Group meeting was scheduled for January 2013 to discuss the draft versions for Basic Technical Characteristics of the encapsulation plant and the geological repository.

  • Potential Wind Generation by ZoneFigure 2.1. New York Control Area Load Zones, and Potential Wind Generation AWS Scientific also provided technical reports relating to wind generation, including • Wind Generation Technical Characteristics for the NYSERDA Wind Impacts Study• Overview of Wind Energy Generation ForecastingThese reports are presently in draft form, and will be released in February 2004.


More Definitions of Technical Characteristics

Technical Characteristics means, for the purpose of Condition RVTD7, the physical, electrical and other relevant characteristics and the network interworking and service management protocols; and
Sample 1
Technical Characteristics means the intrinsic properties of a product and its external characteristics, including inter alia the product's reactions in a given environment (humidity, temperature, etc.);
Sample 1
Technical Characteristics. The information published on the page xxxx://xxxxx.xxxxx.xx/login.aspx containing the technical characteristics of the Service. Clauses for registering .it domains: the document containing the terms of the contract provided by the Registry of xxXXX.xx, published on the page xxxx://xxxxxxx.xxxxx.xx/termini- condizioni.asp?Lang=EN, which the Customer must accept and undertake to observe in the case of registering a domain name with xxXXX.xx.
Sample 1

Related to Technical Characteristics

  • Case characteristics means demographic or other objective characteristics of a small

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Technical Specifications means the detailed requirements for the Work furnished by the Architect and set forth in Book 3 of the Contract Documents.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Obligation Characteristics means any one or more of Not Subordinated, Specified Currency, Not Sovereign Lender, Not Domestic Currency, Not Domestic Law, Listed and Not Domestic Issuance, and:

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Outputs means the goods or services that are produced by an entity or other person;

  • Quality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs;

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Category 4 Data is data that is confidential and requires special handling due to statutes or regulations that require especially strict protection of the data and from which especially serious consequences may arise in the event of any compromise of such data. Data classified as Category 4 includes but is not limited to data protected by: the Health Insurance Portability and Accountability Act (HIPAA), Pub. L. 104-191 as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), 45 CFR Parts 160 and 164; the Family Educational Rights and Privacy Act (FERPA), 20 U.S.C. §1232g; 34 CFR Part 99; Internal Revenue Service Publication 1075 (xxxxx://xxx.xxx.xxx/pub/irs-pdf/p1075.pdf); Substance Abuse and Mental Health Services Administration regulations on Confidentiality of Alcohol and Drug Abuse Patient Records, 42 CFR Part 2; and/or Criminal Justice Information Services, 28 CFR Part 20.

  • functionality means the ability of a tenderer to provide goods or services in accordance with specifications as set out in the tender documents.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production. Manual Load Dump Action:

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.

  • Categorical pretreatment standard or "categorical standard" means any regulation containing pollutant discharge limits promulgated by the environmental protection agency in accordance with sections 307(b) and (c) of the Act (33 U.S.C. section 1317) that apply to a specific category of users and that appear in 40 CFR chapter I, subchapter N, parts 405 through 471.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Service Specifications means the following documents, as applicable to the Services under Your order:

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.