Surface water standards definition

Surface water standards means surface water standards as established in 15A NCAC 02B .0200.
Sample 1Sample 2Sample 3

Examples of Surface water standards in a sentence

  • Surface water standards provided in Chapter 3745-1 of the Administrative Code, in accordance with paragraph (F)(2)(a) of rule 3745-300-08 of the Administrative Code, for all releases or source areas of hazardous substances on or from the property to surface waters of the state.

  • Surface water standards for potential bioaccumulation of chemicals in aquatic organisms and subsequent human consumption of these organisms were not directly considered in the selection of groundwater screening levels for potential aquatic habitat impacts.

  • The largest groups are gathered under the words league (sports league, American football league, Australian football league, etc.

  • Discharge standards for effluents, Surface water standards (IAC, Division 567, Chapters 61, 62) Relevant and Appropriate These regulations set the chemical concentration standards for discharges to surface water.

  • If the executive director [commission] revokes the approval authority of a municipality, owners of a project [any completed projects or projects under construction] whose plans and specifications were already approved by the municipality[prior to revocation] are not required to seek approval from the executive director [commission].

  • It provided water for a reservoir 40 feet in diameter and ten feet high.

  • Surface water standards are set to protect the quality of all waters of the state, including rivers, streams, bayous, lakes, reservoirs, wetlands, estuaries, and many other types of surface water.

  • Surface Water- Water sampling results are compared with Surface water standards IS 2296:1992.

  • Surface water standards rather than drinking water standards were used because groundwater at OU NSC is not potable due to the influence of seawater.

  • Surface water standards are established by the NHDES's Env-Ws 1700 "Surface Water Quality Regulations", effective May 21, 2008.

Related to Surface water standards

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. § 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. § 1317).

  • Clean air standards, as used in this clause, means:

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Occupational Health and Safety Act means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993);

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, ordinances and other provisions having the force or effect of law, all judicial and administrative orders and determinations, all contractual obligations and all common law concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, chemical substances or mixtures, pesticides, pollutants, contaminants, toxic chemicals, petroleum products or byproducts, asbestos, polychlorinated biphenyls, noise or radiation, each as amended and as now or hereafter in effect.

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • Agricultural waste means biomass waste materials capable of decomposition that are produced from the

  • Virginia Stormwater Management Act means Article 2.3 (§ 62.1-44.15:24 et seq.) of Chapter 3.1 of Title 62.1 of the Code of Virginia.

  • Cathodic protection means a technique designed to prevent the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. For example, protection can be accomplished with an impressed current system or a galvanic anode system.