Sulfur oxides definition

Sulfur oxides means sulfur dioxide, sulfur trioxide, their acids and the salts of their acids. The concentration of sulfur dioxide is measured by the methods specified in this Subchapter.
Sulfur oxides means sulfur dioxide, sulfur trioxide, their acids, and the salts of their acids.
Sulfur oxides means compounds of sulfur dioxide (SO2), and other oxides of sulfur, which are typically created during combustion of sulfur containing fuels.

Examples of Sulfur oxides in a sentence

  • Oxides Emissions Cost, CAISO Hourly Particulate Matter Emissions Cost, and CAISO Hourly Carbon Monoxide Emissions Cost The CAISO Hourly Organic Gases (OG) Emissions Cost, CAISO Hourly Sulfur Oxides (SOx) Emissions Cost, CAISO Hourly Particulate Matter (PM) Emissions Cost, and CAISO Hourly Carbon Monoxide (CO) Emissions Cost are each calculated in accordance with Equation C1-17.


More Definitions of Sulfur oxides

Sulfur oxides or “SOx” means all oxides of sulfur.

Related to Sulfur oxides

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • CO2 means carbon dioxide.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by:

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Cannabinoid concentrate means a substance obtained by separating cannabinoids from marijuana by:

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Condensate means hydrocarbon liquid separated from natural gas which condenses due to changes in the temperature or pressure and remains liquid at standard conditions.

  • Polystyrene foam means blown polystyrene and expanded and

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Slow sand filtration means a process involving passage of raw water through a bed of sand at low velocity (generally less than 0.4 meters per hour (m/h)) resulting in substantial particulate removal by physical and biological mechanisms.

  • Kerosene means all grades of kerosene, including, but not limited to, the 2 grades of kerosene, No. 1-K and No. 2-K, commonly known as K-1 kerosene and K-2 kerosene respectively, described in American society for testing and materials specifications D-3699, in effect on January 1, 1999, and kerosene-type jet fuel described in American society for testing and materials specification D-1655 and military specifications MIL-T-5624r and MIL-T-83133d (grades jp-5 and jp-8), and any successor internal revenue service rules or regulations, as the specification for kerosene and kerosene-type jet fuel. Kerosene does not include an excluded liquid.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.