Standard size definition

Standard size. ’ means a clothes dryer with a drum capacity of 4.4 cubic feet or greater.
Standard size means 8.5” x 11”; 8.5” x 14”; and 11” x 17”.
Standard size. This is typically $100,000 of base currency but maybe more or less than some pairs from time to time. “Total Equity” The sum of (i) cash; plus (ii) gains on open positions; less (iii) losses on open positions.

Examples of Standard size in a sentence

  • Rock Core Samples Obtained Using Standard Size Diamond Bits SPT N-VALUE (N-INDEX) The standard penetration test (SPT) provides a qualitative evaluation of compactness and a qualitative comparison of subsoil stratification.

  • Standard Size of Sieve % Passing 3/8 “ 100% #4 60-90% #8 5-60% #16 0-30% #200 0-2% Note: A certified sieve analysis is required prior to delivery or pick up of the materials.

  • When Auto Standard Size or Auto Standard Width is selected and the document is not centered, but is instead shifted left on the scanner, the media space added for the standard size may view or print as a black or stripped area on the scanned image depending on the scanning mode used.


More Definitions of Standard size

Standard size means a packaged terminal air conditioner or packaged terminal heat pump with wall sleeve dimensions having an external wall opening of greater than or equal to 16 inches high or greater than or equal to 42 inches wide, and a cross-sectional area greater than or equal to 670 square inches.
Standard size means 81 /2 x 11 inches or 21.59 x 27.94 centimeters (SB 98 by Senator
Standard size means a card size of 2 1/2" x 3 1/2".
Standard size means a card size of 2-1/2" x 3-1/2" except that the standard size "Jam Session" card shall be 2-1/2" x 4-11/16".
Standard size. ’ means a clothes
Standard size. This is typically $100,000 of base currency but maybe more or less than some pairs from time to time.

Related to Standard size

  • Standard Services means the standard Services referred to in Schedule 1 (Services) of this Framework Agreement;

  • Lot Size means the number Underlying Assets in one Lot in a CFD.

  • Standard Conditions means the “International Bank for Reconstruction and Development and International Development Association Standard Conditions for Grant Financing Made by the Bank out of Trust Funds”, dated February 25, 2019.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Standard fertility preservation services means procedure based upon current evidence-based standards of care established by the American Society for Reproductive Medicine, the American Society for Clinical Oncology, or other national medical associations that follow current evidence-based standards of care.

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Staging pile means an accumulation of solid, non- flowing remediation waste (as defined in this section) that is not a containment building and that is used only during remedial operations for temporary storage at a facility. Staging piles must be designated by the Director according to the requirements of § 264.554 of this regulation.

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Air navigation facility means any facility, other than one owned and operated by the United States, used in, available for use in, or designed for use in aid of air navigation, including any structures, mechanisms, lights, beacons, markers, communicating systems, or other instrumentalities or devices used or useful as an aid, or constituting an advantage or convenience to the safe taking off, navigation, and landing of aircraft, or the safe and efficient operation or maintenance of an airport, and any combination of any or all of such facilities.

  • Automobile Headliner Adhesive means an aerosol adhesive designed to bond together layers in motor vehicle headliners.