Standard Methods for the Examination of Water and Wastewater definition

Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;
Sample 1Sample 2Sample 3
Standard Methods for the Examination of Water and Wastewater means that standard which, for the purposes of this chapter, is the recognized standard that provides the protocol for the microbiological water quality standards for all public recreational bathing places and may be obtained from the American Public Health Association.
Sample 1Sample 2Sample 3
Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by
Sample 1Sample 2

Examples of Standard Methods for the Examination of Water and Wastewater in a sentence

  • The test methodology used shall be from the latest edition, Part 2540 G of Standard Methods for the Examination of Water and Wastewater American Public Health Association, American Water Works Association, and Water Environment Federation.

  • The test methodology used shall be from Part 2540 G of Standard Methods for the Examination of Water and Wastewater American Public Health Association, American Water Works Association, and Water Environment Federation, using the edition which is current on the issuance date of the permit.

  • Standard Methods for the Examination of Water and Wastewater describes dechlorination of samples (APHA, 1992).

  • The sample aliquots must be collected and stored in accordance with procedures prescribed in the most recent edition of Standard Methods for the Examination of Water and Wastewater.

  • Where collection, preservation, and handling procedures are not outlined in 40 CFR 136.3, procedures outlined in the 18th edition of Standard Methods for the Examination of Water and Wastewater shall be used.

  • Total Residual Chlorine may be performed using any of the following methods provided the required minimum limit (ML) is met.• APHA Standard Methods for the Examination of Water and Wastewater , 21st Edition-Method 4500-CL E Low Level Amperometric Titration-Method 4500-CL G DPD Colorimetric Method• USEPA 1983.

  • Tests on diluents (marine waters) shall be conducted using the Part 136 methods that yield the lowest MLs. *2 Either of the following methods from the 18th Edition of the APHA Standard Methods for the Examination of Water and Wastewater must be used for these analyses:-Method 4500-Cl E Low Level Amperometric Titration (the preferred method);-Method 4500-CL G DPD Photometric Method.

  • Where collection, preservation, and handling procedures are not outlined in 40 CFR § 136.3, procedures outlined in the 18th edition of Standard Methods for the Examination of Water and Wastewater shall be used.

  • Total Residual Chlorine may be performed using any of the following methods provided the required minimum limit (ML) is met.• APHA Standard Methods for the Examination of Water and Wastewater , 21st Edition- Method 4500-CL E Low Level Amperometric Titration- Method 4500-CL G DPD Colorimetric Method3.

  • Sample collection, preservation and handling shall be performed as described in 40 CFR 136 including the referenced Edition of Standard Methods for the Examination of Water and Wastewater, or by procedures referenced in A.R.S. Title 9, Chapter 14 of the Arizona Department of Health Services (ADHS) Laboratory Licensure rules.


More Definitions of Standard Methods for the Examination of Water and Wastewater

Standard Methods for the Examination of Water and Wastewater means "Standard Methods for the Examination of Water and Wastewater, 21st Edition, American Public Health Association, American Water Works Association and Water Environment Federation, 2005." This document is available on theinternet at http://www.standardmethods.org/.
Sample 1
Standard Methods for the Examination of Water and Wastewater means the latest edition, including any amendments and supplements, as published by the American Water Works Association (AWWA)/American Public Health Association/Water Environment Federation).
Sample 1
Standard Methods for the Examination of Water and Wastewater means the 18th edition (including the Supplement) as published by the American Water Works Association (AWWA)/American Public Health Association, or the most current subsequent edition of this publication. STORMWATER means all surface water run-off resulting from precipitation. TANKERED WASTE is water or other liquid, including waste matter in solution or suspension, which is conveyed by vehicle for disposal. TERRITORIAL AUTHORITY (TA) means a city council, or district council. TRADE PREMISES means any premises used or intended to be used for carrying on any trade or industry, and includes any land or premises wholly or mainly used for agricultural or horticultural purposes. TRADE WASTE is any liquid, with or without matter in suspension or solution, that is or may be discharged from a trade premises in the course of any trade or industrial process or operation, or in the course of any activity or operation of a like nature; but does not include condensing or cooling waters; stormwater, or domestic sewage. WASTEWATER means water or other liquid, including waste matter in solution or suspension, discharged from a premises to a sewer. WASTEWATER AUTHORITY (WWA) means the unit of a territorial authority including its authorized agents, responsible for the collection, treatment and disposal of wastewater.
Sample 1Sample 2
Standard Methods for the Examination of Water and Wastewater means that standard which, for the purposes of this chapter, is the recognized standard
Sample 1
Standard Methods for the Examination of Water and Wastewater means the approval methods developed by the APHA, the AWWA and the Water Environmental Federation. The current standard methods are contained in the 20th Edition, published by the AWWA.
Sample 1

Related to Standard Methods for the Examination of Water and Wastewater

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Electronic and Information Resources Accessibility Standards means the accessibility standards for electronic and information resources contained in 1 Texas Administrative Code Chapter 213.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Stormwater management measure means any practice, technology, process, program, or other method intended to control or reduce stormwater runoff and associated pollutants, or to induce or control the infiltration or groundwater recharge of stormwater or to eliminate illicit or illegal non-stormwater discharges into stormwater conveyances.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Stormwater runoff means water flow on the surface of the ground or in storm sewers, resulting from precipitation.

  • Stormwater management system means any equipment, plants,

  • Underground source of drinking water means an aquifer or its portion:

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Stormwater management BMP means an excavation or embankment and related areas designed to retain stormwater runoff. A stormwater management BMP may either be normally dry (that is, a detention basin or infiltration system), retain water in a permanent pool (a retention basin), or be planted mainly with wetland vegetation (most constructed stormwater wetlands).

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Stormwater Pollution Prevention Plan or "SWPPP" means a document that is prepared in accordance with good engineering practices and that identifies potential sources of pollutants that may reasonably be expected to affect the quality of stormwater discharges from the construction site, and otherwise meets the requirements of this Ordinance. In addition the document shall identify and require the implementation of control measures, and shall include, but not be limited to the inclusion of, or the incorporation by reference of, an approved erosion and sediment control plan, an approved stormwater management plan, and a pollution prevention plan.

  • Remediation waste management site means a facility where an owner or operator is or will be treating, storing or disposing of hazardous remediation wastes. A remediation waste management site is not a facility that is subject to corrective action under § 264.101 of this regulation, but is subject to corrective action requirements if the site is located in such a facility.

  • Train Unloading Infrastructure means train unloading infrastructure reasonably required for the unloading of iron ore from the Railway to be processed, or blended with other iron ore, at processing or blending facilities in the vicinity of that train unloading infrastructure and with the resulting iron ore products then loaded on to the Railway for transport (directly or indirectly) to a loading port. Company to obtain prior Ministerial in-principle approval

  • Tomographic plane means that geometric plane which is identified as corresponding to the output tomogram.

  • Maritime cargo handling services means activities exercised by stevedore companies, including terminal operators, but not including the direct activities of dockers, when this workforce is organised independently of the stevedoring or terminal operator companies. The activities covered include the organisation and supervision of:

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Stormwater management plan means the set of drawings and other documents that comprise all the information and specifications for the programs, drainage systems, structures, BMPs, concepts and techniques intended to maintain or restore quality and quantity of stormwater runoff to pre-development levels.

  • Septic tank means a water tight tank designed to receive sewage and to effect the adequate decomposition of organic matter in sewage by bacterial action;