Standard Cubic Feet definition

Standard Cubic Feet or “Scf” means, in relation to gas, the quantity of dry real gas, at a temperature of sixty (60) degrees Fahrenheit and an abolute pressure of fourteen decimal six nine six (14.696) pounds per square inch respectively.
Sample 1Sample 2Sample 3
Standard Cubic Feet or "scf" means the quantity of gas which, when saturated with water vapor at a temperature of sixty degrees Fahrenheit (60°F) and an absolute pressure of 14.73 pounds per square inch, occupies 1 cubic foot;
Sample 1
Standard Cubic Feet means, in relation to natural gas, the quantity of dry ideal gas at a temperature of sixty (60) degrees Fahrenheit and a pressure of fourteen decimal six nine six (14.696) pounds per square inch absolute contained in a volume of one (1) cubic foot;
Sample 1

Examples of Standard Cubic Feet in a sentence

  • Under considerable pressure from the federal government, from the Treuhand Agency, and even from the public, representatives of the banking associations f i- nally announced in 1993 that they would support the Treuhand Agency with a billion marks to aid in the process of privatization.

  • The Annual Meeting/General Session Chair will be responsible for assisting the NGAT Board of Directors in preparation for the Annual Meeting and/or General Session.

  • A stored pressure air supply shall store not less than 5,000 Standard Cubic Feet (SCF) of air or be capable of refilling not less than 50 empty breathing air cylinders of a size and pressure used by the fire department, whichever is greater.

  • Measurement of Carbon Dioxide shall be determined on the basis of pound-mass quantities, which shall be converted to Standard Cubic Feet quantities.

  • Each sample is filtered through a 0.6-cm-diameter surface area in the membrane.

  • I understand that should the exception be granted, I may be required to file a CNG Form 1500, Application to Install CNG Facility (Aggregate Capacity Greater than 240 Standard Cubic Feet Water Volume); CNG Form 1500A, Notice of Proposed Compressed Natural Gas Installation; or CNG Form 1501, Completion Report for CNG Commercial Installations of 240 Standard Cubic Feet Water Volume or Less.

  • Special units for GSV are allowed on the master side, but the device being polled (slave) cannot have special units set for density, otherwise the master will reject the base density and report an A115: No External Input or Polled Data Alert.ProcedureSet Gas Standard Volume Flow Unit to the unit you want to use.The default setting for Gas Standard Volume Flow Unit is SCFM (Standard Cubic Feet per Minute).

  • As noted in D.17-06-015 at 22, the 2015 baseline for PG&E is 3,294,368.32 Mscf (thousand Standard Cubic Feet) and for SoCalGas is 2,779,852.63 Mscf.54 Accordingly, in 2025 and subsequent years, PG&E may not recover shrinkage allowances of any methane emissions reported for the year exceeding 2,635,495 Mscf and SoCalGas may not recover the cost for any methane emissions exceeding 2,223,882 Mscf.

  • No. Identification Number MMBTUMillion British Thermal UnitsMMSCF/yr Million Standard Cubic Feet per year NOx Nitrogen OxidesPM10 Particulate matter less than 10 microns in diameter SO2 Sulfur DioxideEPA United States Environmental Protection Agency VOC Volatile Organic CompoundsMBTA Migratory Bird Treaty Act List of Tables Table 1.

  • The Fox FT4X measures the mass flow of gases directly Thousand Standard Cubic Feet per Day (MSCFD), Normal Cubic Meters per Hour (NM3H), Kilogram per Hour (Kg/Hr), and other mass units without the need for pressure or temperature compensation.


More Definitions of Standard Cubic Feet

Standard Cubic Feet or "scf" means the quantity of gas which, when saturated with water vapor at a temperature of sixty degrees Fahrenheit (60°F) and an absolute pressure of 14.73 pounds per square inch, occupies 1 cubic foot; "Start-Up and Performance Tests" means the commissioning procedures and FSRU performance tests, including the Rxxxx Tests, in accordance with the program to be agreed in accordance with Schedule 4;
Sample 1

Related to Standard Cubic Feet

  • Standard Cost means any cost computed with the use of preestablished measures.

  • Gross Standard Volume as herein used means volume corrected to a temperature of sixty degrees (60°) Fahrenheit, in accordance with the latest API/ASTM measurement standards, and at equilibrium vapor pressure.

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • On-premise beer retailer means a beer retailer who is:

  • Standard Rate means, for any day, a rate per annum equal to the Bank's announced Prime Rate minus 0% per annum, and each change in the Standard Rate shall be effective on the date any change in the Prime Rate is publicly announced as being effective.

  • Standard Methods means the examination and analytical procedures set forth in the most recent edition of "Standard Methods for the Examination of Water and Wastewater" published jointly by the American Public Health Association, the American Water Works Association, and the Water Pollution Control Federation.

  • Lowest Achievable Emission Rate (LAER means, for any source, the more stringent rate of emissions based on the following:

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Modular building retailer means any person who purchases or acquires a modular building from a

  • Standard Services means the standard Services referred to in Schedule 1 (Services) of this Framework Agreement;

  • Standard Turnover means the turnover achieved between the date of commencement of your business and the date of the damage, converted to the selected indemnity period.

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • HICP Daily Inflation Reference Index means (A) in relation to the first calendar day of any given month, the HICP Monthly Reference Index of the third month preceding such month, and (B) in relation to a calendar day (D) (other than the first calendar day) in any given month (M), the linear interpolation of the HICP Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Zero tolerance means that the school will not tolerate the possession of any weapon by any person. The term “weapon” is defined as any object or substance which by its design, threatened use, or use could cause bodily injury or property damage, including any object which could reasonably be mistaken for a weapon. The division director and dean of student life shall use their discretion when interpreting the use and intent of such articles at school.

  • Lowest achievable emission rate or “LAER” means, for any source, the more stringent rate of emissions based on the following:

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • CPI Daily Inflation Reference Index means (A) in relation to the first day of any given month, the CPI Monthly Reference Index of the third month preceding such month, and (B) in relation to a day (D) (other than the first day) in any given month (M), the linear interpolation of the CPI Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Standard Materials means all Materials not specified as Custom Materials.

  • Brand Name or Equal Specification means a specification which uses one or more manufacturer’s names or catalogue numbers to describe the standard of quality, performance, and other characteristics needed to meet District requirements, and which provides for the submission of equivalent products.

  • Top Level Domain means the portion of the Domain Name to the right of the right-most period. (In the example, “COM”.) “Second Level Domain” means that portion of a domain name to the left of the right-most period, up to the second period from the right, if any, plus the Top Level Domain. (In the example, “XXXXXXXXX.XXX”.) “Third Level Domain” means that portion of a domain name to the left of the second period from the right, if any, up to the third period from the right, if any, plus the Second Level Domain. (In the example, “XXXXXXXXX.XXXXXXXXX.XXX”.).

  • Bid with Lowest Evaluated Cost means the bid quoting lowest cost amongst all those bids evaluated to be substantially responsive;

  • Day-ahead System Energy Price means the System Energy Price resulting from the Day- ahead Energy Market.

  • Standard Service means Facilities which meet good economic electric industry practice including safety, reliability and operating criteria and standards consistent with the particular characteristics of service as determined by FortisAlberta acting reasonably;

  • Fully Burdened Manufacturing Cost means, with respect to any Licensed Product supplied by or on behalf of NVCR to Zai hereunder if such Licensed Product (or any precursor or intermediate thereof) is manufactured by a Third Party manufacturer [***].