Standard Capacity definition

Standard Capacity means for any EG Product the product of (a) the Width Capacity for such EG Product times (b) the quotient of the specified thickness of the processed steel substrate divided by *** times (c) the quotient of *** divided by the Coating Weight applied to the processed steel substrate.
Standard Capacity means the capacity at the entry/exit points to/from the distribution area. It has a firm and an interruptible part, with the availability of the firm part depending on the current off- take in the distribution area;
Standard Capacity means, for each Dedicated Unit, the generating capacity of such Unit without duct firing or steam injection, as such capacity is determined in accordance with Section 11.1 and Appendix B.

Examples of Standard Capacity in a sentence

  • Standard Capacity of truck : say 18MTb. HSD : Say Rs. "A", increase per litre, Escalation per MT = A/(3.0*18) in Rs./MT/KMThe decision of the Corporation on the calculations as well as implementation will be final and binding.

  • Both Standard Capacity and High Capacity filters are to be used in this specification.

  • The Transporter shall notify to the JBP Operator the applicable Transporter Reserve Price for each Standard Capacity Product which may be applied in each Capacity Auction and the Transporter Large Price Step and Transporter Small Price Step for each Standard Capacity Product which may be applied for in each Ascending Clock Auction.

  • Each auction process, relating to a single Standard Capacity Product, shall allocate capacity independently of every other auction process.

  • Bids for the different Standard Capacity Products shall be considered independently from each other in the application of the auction algorithm.

  • The new incentive mechanism replaces the previously existing Standard Capacity Product and utilizes a resource’s economic and self schedule bids to evaluate Resource Adequacy and Capacity Procurement Capacity availability.

  • The transmission system operator shall rank all bids relating to a given Standard Capacity Product according to their bid price, the highest price ranking first.

  • In 2010, the CAISO implemented a Standard Capacity Product to streamline the RA program.

  • The Standard Capacity Product also enhances grid reliability and market efficiency by providing an incentive for Resource Adequacy Resources to be available during peak hours.

  • The cost of purchasing, installing, maintaining, and reading a separate meter shall be at Tenant's expense, and Tenant shall pay to Landlord, on demand, the cost of the consumption of electrical services within the Premises in excess of the Building Standard Capacity at rates determined by Landlord in accordance with applicable laws.


More Definitions of Standard Capacity

Standard Capacity means the generating capacity of the Dedicated Unit at full combustion turbine output without duct firing or steam injection. The Standard Capacity shall be determined in accordance with Section 11.1 and Appendix A. The Standard Capacity shall adjust with ambient conditions in accordance with the actual capability of the Dedicated Unit.
Standard Capacity means the capacity at the entry or exit points into or from the distribution area. It is composed of a fixed and an interruptible part, where the availability of the fixed part is dynamic and depends on the current sales in the distribution area.
Standard Capacity means, for each Dedicated Unit, the Contract Standard Capacity adjusted to actual ambient conditions in accordance with the Ambient Condition Adjustment Formulas.

Related to Standard Capacity

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Base Capacity Resource means a Capacity Resource as described in Tariff, Attachment DD, section 5.5A(b).

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement. Generation Interconnection Customer: