Standard Base Conditions definition

Standard Base Conditions means a pressure of fourteen and sixty five hundredths pounds per square inch absolute (14.65 psia) at a temperature of sixty degrees Fahrenheit (60°F).
Standard Base Conditions means a pressure of fourteen and seventy three hundredths (14.73) Psia at a temperature of sixty degrees Fahrenheit (60°F). The atmospheric pressure used by Provider where Gas is measured shall be assumed to be thirteen and five tenths (13.5) Psia, irrespective of the actual elevation of the measurement station(s) above sea level or variations in atmospheric pressure that may occur from time to time.
Standard Base Conditions means a pressure of fourteen and seventy three hundredths (14.73) Psia at a temperature of sixty degrees Fahrenheit (60°F). The atmospheric pressure used by Gatherer where Gas is measured shall be assumed to be thirteen and five tenths (13.5) Psia, irrespective of the actual elevation of the measurement station(s) above sea level or variations in atmospheric pressure that may occur from time to time.

Examples of Standard Base Conditions in a sentence

  • For all purposes under this Agreement, volume will be measured in terms of, cubic feet of Gas at Standard Base Conditions.

  • The unit of measurement for all Owner's Gas delivered hereunder shall be one thousand (1,000) standard cubic feet at Standard Base Conditions.

  • For all purposes under this Agreement (including without limitation pricing and payment) the heating value of and the number of Btu contained in the Gas delivered hereunder will be measured in terms of, the gross number of Btu’s that would be contained in the volume of such Gas (measured in accordance with this Article) when saturated with water vapor and at Standard Base Conditions.


More Definitions of Standard Base Conditions

Standard Base Conditions means a temperature of 60° F and a pressure of 15.025 psia.
Standard Base Conditions means a temperature of 60 degrees Fahrenheit and a pressure of fourteen and sixty-five hundredths (14.65) pounds per square inch absolute.

Related to Standard Base Conditions

  • Release Conditions mean the following conditions: (i) Company has received the Executive’s executed Release and (ii) any rescission period applicable to the Executive’s executed Release has expired.

  • these Conditions means the standard terms and conditions of purchase set out in this document and (unless the context otherwise requires) includes any special terms and conditions agreed in writing between the Buyer and the Seller;

  • Mortgage Conditions means the mortgage conditions booklet reference MORT 0154 MAY 13 HF;

  • Standard Conditions means the “International Bank for Reconstruction and Development and International Development Association Standard Conditions for Grant Financing Made by the Bank out of Trust Funds”, dated February 25, 2019.

  • Licence Conditions means the licence terms and conditions contained in this document, as amended from time to time in accordance with this agreement.

  • Release Condition means the following:

  • Performance Conditions means specific levels of performance of the Company (and/or one or more members of the Company Group, divisions or operational and/or business units, product lines, brands, business segments, administrative departments, or any combination of the foregoing), which may be determined in accordance with GAAP or on a non-GAAP basis, including, without limitation, the following measures: (i) net earnings, net income (before or after taxes), or consolidated net income; (ii) basic or diluted earnings per share (before or after taxes); (iii) net revenue or net revenue growth; (iv) gross revenue or gross revenue growth, gross profit or gross profit growth; (v) net operating profit (before or after taxes); (vi) return measures (including, but not limited to, return on investment, assets, capital, employed capital, invested capital, equity, or sales); (vii) cash flow measures (including, but not limited to, operating cash flow, free cash flow, or cash flow return on capital), which may be but are not required to be measured on a per share basis; (viii) actual or adjusted earnings before or after interest, taxes, depreciation, and/or amortization (including EBIT and EBITDA); (ix) gross or net operating margins; (x) productivity ratios; (xi) share price (including, but not limited to, growth measures and total stockholder return); (xii) expense targets or cost reduction goals, general and administrative expense savings; (xiii) operating efficiency; (xiv) objective measures of customer/client satisfaction; (xv) working capital targets; (xvi) measures of economic value added or other ‘value creation’ metrics; (xvii) enterprise value; (xviii) sales; (xix) stockholder return; (xx) customer/client retention; (xxi) competitive market metrics; (xxii) employee retention; (xxiii) objective measures of personal targets, goals, or completion of projects (including, but not limited to, succession and hiring projects, completion of specific acquisitions, dispositions, reorganizations, or other corporate transactions or capital-raising transactions, expansions of specific business operations, and meeting divisional or project budgets); (xxiv) comparisons of continuing operations to other operations; (xxv) market share; (xxvi) cost of capital, debt leverage, year-end cash position or book value; (xxvii) strategic objectives; (xxviii) gross or net authorizations; (xxix) backlog; or (xxx) any combination of the foregoing. Any one or more of the aforementioned performance criteria may be stated as a percentage of another performance criteria, or used on an absolute or relative basis to measure the performance of one or more members of the Company Group as a whole or any divisions or operational and/or business units, product lines, brands, business segments, or administrative departments of the Company and/or one or more members of the Company Group or any combination thereof, as the Committee may deem appropriate, or any of the above performance criteria may be compared to the performance of a selected group of comparison companies, or a published or special index that the Committee, in its sole discretion, deems appropriate, or as compared to various stock market indices.

  • Payment Conditions means, at the time of determination with respect to any specified transaction or payment, that:

  • fair and reasonable conditions means appropriate conditions, including possible financial terms or royalty-free conditions, taking into account the specific circumstances of the request for access, for example the actual or potential value of the results or background to which access is requested and/or the scope, duration or other characteristics of the exploitation envisaged;

  • Step Down Conditions As of any Distribution Date on which any decrease in any Senior Prepayment Percentage may apply, (i) the outstanding Principal Balance of all Mortgage Loans 60 days or more Delinquent (including Mortgage Loans in REO and foreclosure), averaged over the preceding six month period, as a percentage of the aggregate of the Class Certificate Principal Balances of the Classes of Subordinate Certificates on such Distribution Date, does not equal or exceed 50% and (ii) cumulative Realized Losses with respect to all of the Mortgage Loans do not exceed: · for any Distribution Date on or after the seventh anniversary until the eighth anniversary of the first Distribution Date, 30% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, · for any Distribution Date on or after the eighth anniversary until the ninth anniversary of the first Distribution Date, 35% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, · for any Distribution Date on or after the ninth anniversary until the tenth anniversary of the first Distribution Date, 40% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, · for any Distribution Date on or after the tenth anniversary until the eleventh anniversary of the first Distribution Date, 45% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, and · for any Distribution Date on or after the eleventh anniversary of the first Distribution Date, 50% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date.

  • Unsafe condition as used in this clause means the actual or potential exposure of contractor or Government employees to a hazardous material as defined in Federal Standard No. 313, and any revisions thereto during the term of this contract, or any other material or working condition designated by the Contracting Officer's Technical Representative (COTR) as potentially hazardous and requiring safety controls.

  • Escrow Release Conditions has the meaning set forth in the Escrow Agreement.

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Acute condition means a disease, illness or injury that is likely to respond quickly to treatment which aims to return the person to his or her state of health immediately before suffering the disease/ illness/ injury which leads to full recovery.

  • Normal Operating Conditions means those Service conditions which are within the control of Grantee. Those conditions which are not within the control of Grantee include, but are not limited to, natural disasters, civil disturbances, power outages, telephone network outages, and severe or unusual weather conditions. Those conditions which are ordinarily within the control of Grantee include, but are not limited to, special promotions, pay-per-view events, rate increases, regular peak or seasonal demand periods, and maintenance or upgrade of the Cable System.

  • Performance Condition means a condition related to performance which is specified by the Committee under Rule 4.1 (Terms of grant);

  • the Conditions means the standard terms and conditions set out in this document;

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Terms & Conditions means the Special Conditions of Contract and General Conditions of Contract herein mentioned and other stipulations incorporated in any part of Tender Document and /or Agreement.

  • Termination Conditions means, collectively, (a) the payment in full in cash of the Obligations (other than (i) contingent indemnification obligations not then due and (ii) Obligations under Secured Hedge Agreements and Secured Cash Management Agreements) and (b) the termination of the Commitments and the termination or expiration of all Letters of Credit under this Agreement (unless the Outstanding Amount of the L/C Obligations related thereto has been Cash Collateralized on terms reasonably acceptable to the applicable Issuing Bank, backstopped by a letter of credit reasonably satisfactory to the applicable Issuing Bank or deemed reissued under another agreement reasonably acceptable to the applicable Issuing Bank).

  • Payment Condition at any time of determination with respect to any Specified Transaction, that the following conditions are all satisfied: (x) (1) 30-Day Specified Excess Availability (divided by Availability as of such time of determination and expressed as a percentage) and (2) the Specified Availability on the date of such Specified Transaction (divided by Availability as of such time of determination and expressed as a percentage), in each case exceed the applicable Availability Percentage (as defined below), (y) unless the Fixed Charge Condition (as defined below) is satisfied (to the extent applicable), the Parent Borrower shall be in Pro Forma Compliance with a minimum Consolidated Fixed Charge Coverage Ratio of at least 1.00:1.00 and (z) if reasonably requested by the Administrative Agent, the Borrower Representative shall have delivered to the Administrative Agent (i) a copy of calculations required by preceding clause (y) in reasonable detail and (ii) a calculation of Specified Unrestricted Cash. As used herein, the following terms shall have the following meanings: (i) “Availability Percentage” shall mean (a) in respect of any Restricted Payment pursuant to Subsection 8.3(k), 12.5%; (b) in respect of (A) any investment or acquisition permitted pursuant to clause (u) of the definition of “Permitted Investments” or (B) clause (c)(i) of the definition of “Permitted Acquisitions,” 10.0%; (c) in respect of any payment, repurchase or redemption pursuant to Subsection 8.6(a), 12.5%; (d) in respect of any merger, consolidation, amalgamation or asset sale pursuant to Subsection 8.2(a) or 8.2(b), 10.0%; and (e) in respect of any Asset Sale that would otherwise have to comply with Subsection 8.5, 10.0%; and (ii) “Fixed Charge Condition” shall mean 30-Day Specified Excess Availability (divided by Availability as of such time of determination and expressed as a percentage) exceeds: (a) in respect of any Restricted Payment pursuant to Subsection 8.3(k), 17.5%; (b) in respect of any acquisition permitted pursuant to clause (c)(i) of the definition of “Permitted Acquisitions”, 15.0%; (c) in respect of any investment permitted pursuant to clause (u) of the definition of “Permitted Investments”, 15.0%; (d) in respect of any payment, repurchase or redemption pursuant to Subsection 8.6(a), 15.0%; and (e) in respect of (A) any merger, consolidation, amalgamation or asset sale pursuant to Subsection 8.2(a) or 8.2(b) or (B) any Asset Sale that would otherwise have to comply with Subsection 8.5, 15.0%.

  • Trading Price Condition shall have the meaning specified in Section 14.01(b)(i).

  • Monthly Remittance Condition has the meaning set forth in Section 4.2 of the Sale and Servicing Agreement.

  • Condition Satisfaction Date shall have the meaning set forth in Section 7.2.

  • Performance Requirements The ordering entity reserves the right to inspect and verify that all deliveries are in accordance with specifications, both at the point of delivery and at the point of use. For orders that specify an “authorized party” to receive and inspect deliveries and/or installations, acceptance and inspection procedures must be performed by the” authorized party” to be considered and accepted by the ordering entity. Products inspected at the time of use are subject to refusal and return requirements for issues of quality such as defects in manufacturing and/or workmanship. Products will not be considered accepted by the ordering entity until the installation is complete for the applicable products.