Specific Density definition

Specific Density means the ratio between the mass of a volume of Gas and the mass of a corresponding volume of dry air at the same temperature (15°C) and pressure (1.01325 Bar) conditions. [“Densità Relativa” in the Italian text]
Sample 1Sample 2Sample 3

Examples of Specific Density in a sentence

  • Test Method for Specific Density of Smoke Generated by Solid Materials.

  • Active Ingredient: Physical state: Liquid Specific Density: 0.844±0.06 g/cm3 Temp: 20 °C Odor: Waxy, fatty Partition coefficient n-octanol/water: Log P: 8.540±0.253 Temp: 25ºC pH: Not applicable Solubility: Not soluble in water.

  • Inserting the following in subsection .2(b) Site Specific Density: "Notwithstanding Section 4.12.1(b), private mooring buoys are not permitted for the surface of the lake adjacent to Section 5, Township 22, Range 9, W6M, KDYD, shown as common property on Plan K46.

  • In summary, quantum gravitational interactions correlate with the mass densities of individual elements and substances, in the requisite form of their relative equivalent Specific Density: 1 𝑅𝜌𝜌=𝑢𝑛kg·m-3·u-1 (1.20) where 𝜌 = mass density, 𝑢 = atomic mass units and 𝑛 = molecular element number (the number of atoms that form a molecular element, else 1).

  • The starting condition in all simulations is x = y = 30, (b = 0 for the AM network).

  • Optimization of Seed Potato Specific Density, Starch and Dry Matter Contents and Tuberization Capacity of Resultant Plants Through Integrated Irrigation, Nitrogen and Phosphorus Management.

  • Temp: 25 °C Flash Point: Flash Point: 139.7±15.9 °C SPLAT GM-O (Mixture: Active Ingredient + Inert Ingredients) Physical state: Thick liquid, semi-solid, grease-like consistency Specific Density: 0.93 g/cm3 Temp: 25 °C Odor: Waxy, fatty Partition coefficient n-octanol/water: Data not available pH: 6.88 Solubility: Partially soluble in water Melting point: Data Not Available Evaporation Rate: Data Not Available Boiling point: Above 100ºC Vapor Pressure: Data not available Flash Point: Not applicable.

  • Eggs were collected within 24 hours of lay tested for Specific Density (SG), dried and stored overnight at 5oC; on the next day, 10 egg samples from each strain were weighed and broken for further analysis.

  • Specific Density (Dm)552568563257320236Clear Beam177199158454DMC (Corrected Dm)375369404418400387Average Ds 1.5 min149 19.9 Average Ds 4.0 min468 13 Average Dm561 271 Average Dm (Corrected)383 267 ●ASTM E-662, Smoke Density, ASTM E-662, NFPA 258, The Polylast material meets this standard.

  • Then, experimenting with it, I have discovered the Information Content Specific Density Conservation principle (Diamant, 2002).

Related to Specific Density

  • Density means the permitted number of dwelling units per

  • Intensity means the number of Program Unique Supervised Hours divided by the Duration for a course or qualification, being a measure of the concentration of training and assessment delivered from the Eligible Individual’s perspective.

  • Licensed Level means a) when referenced in the context of a Named User, the quantity of Metric for which each individual Named User category and type is licensed -and- b) when referenced in the context of a Package, the quantity of Metric for which each individual Package is licensed; and

  • Width means, in relation to a lot,

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Dose is a generic term that means absorbed dose, dose equivalent, effective dose equivalent, committed dose equivalent, committed effective dose equivalent, total organ dose equivalent, or total effective dose equivalent. For purposes of these regulations, "radiation dose" is an equivalent term.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • height means the vertical distance between grade and the highest point of the building or structure;

  • Specific goals means specific goals as contemplated in section 2(1)(d) of the PPPFA which may include contracting with persons, or group of persons, historically disadvantaged by unfair discrimination on the basis of race, gender and disability including the implementation of programmes of the Reconstruction and Development Programme as published in Government Gazette No. 16085 dated 23 November 1994.

  • Population means the population as ascertained at the last preceding census of which the relevant figures have been published;

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Tolerance means a state of adaptation in which exposure to a drug induces changes that result in a diminution of one or more of the drug’s effects over time.

  • Contract Specific Goals means the subcontracting goals for MBE and WBE participation established for a particular contract.

  • Routine use means the disclosure of a record without the consent of the subject or subjects, for a purpose which is compatible with the purpose for which the record was collected. It includes disclosures required to be made by statute other than the public records law, Iowa Code chapter 22.

  • Lot width means the shorter of the following two linear measurements:

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Adult theater means a theater, concert hall, auditorium, or similar commercial establishment which regularly features persons who appear in a state of nudity or live performances which are characterized by the exposure of "specified anatomical areas" or by "specified sexual activities."

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Reference biological product means the single biological product licensed pursuant to 42 U.S.C.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Energy Use Intensity (EUI means the kBTUs (1,000 British Thermal Units) used per square foot of gross floor area.

  • Total Floor Area means, the sum total of the total areas of all floors in a building or structure whether at above or below grade measured between the exterior faces of the exterior walls of the building or structure or from the centre line of a common wall separating two uses or from the outside edge of a floor where the outside edge of the floor does not meet an exterior or common wall, and;

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);