Slurry Wall definition

Slurry Wall means a man-made barrier made of geologic material which is constructed to prevent or impede the movement of contamination into a certain area.
Sample 1Sample 2Sample 3
Slurry Wall and “Slurry Walls” shall mean, but only as applicable to the Xxxxxx Farm Parcel, any one or more Soil-Bentonite Slurry-Trench Cutoff Wall(s) and/or any other impermeable barrier(s) including, but not limited to, earth-berms and/or clay liners that have been designed, constructed and utilized to circumscribe, line and seal certain gravel pits located on the Parcel (but only those gravel pits which have been specifically designated in this Agreement as Storage Cells), so that the water Storage Cells thus created meet and/or exceed the criteria therefor set forth by the Office of the State Engineer in Paragraph 2.0 “Construction Standards” and Paragraph 3.0 “Performance Standards” in its “State Engineer Guidelines for Lining Criteria for Gravel Pits”, August 1999. For purposes of clarity, the term “Slurry Wall(s)” will specifically exclude any temporary safety berm(s) which are or may be required to be constructed by LGE on the Xxxxxx Farm Parcel during LGE’s mining operations thereon in compliance with the regulations of the Mine Safety and Health Administration of the United States Department of Labor; the Parties hereby acknowledging that such temporary safety berm(s) will not in any event be able to satisfy the required design or construction requirements for Slurry Wall(s) set forth above, and cannot therefore be considered to be “Slurry Walls” as such term is defined herein.
Sample 1

Examples of Slurry Wall in a sentence

  • Title to the Fee Parcels, Damage Parcels 2 and 8B, and the Slurry Wall Easements vested in ESD on March 12, 2012.The real property interests acquired by ESD in the FeeParcels are fee simple absolute interests.

  • Under this program, the licensee shall operate and maintain Tertiary Pond Slurry Wall hydraulic monitoring system in accordance with the MP SAP, Attachment 15 of this license.

  • Figure 1: Cross Section of a Typical Keyed-In Slurry Wall Source: Adapted from the Department of Energy (DOE) website There are different materials, and combinations of materials, that can be used to construct slurry cutoff walls including soil-bentonite, cement-bentonite, and plastic concrete.

  • While it will ultimately be determined that the Lime Basins Slurry Wall was constructed as designed (i.e., approval of the Construction Completion Report), issues related to chemical compatibility of the piping material have been identified.

  • No later than seven (7) business days after PNM transmits such notice, the Parties shall confer in good faith to agree on any necessary alternative Slurry Wall Construction Standards or Trench Construction Standards that are consistent with good engineering practices based on specific site conditions.

  • The reference in EPA’s comment is for the Lime Basins Slurry Wall Dewatering project, not the Groundwater Mass Removal project.

  • Compatibility of Ninth Avenue Superfund Site Groundwater With Two Soil-Bentonite Slurry Wall Backfill Mixtures - COE Omaha District; Role: PI; Funding: $120K (1988-1990) 2.

  • No costs are projected moving forward therefore the Element is deemed Complete  Element 2: Levee Improvements (Slurry Wall and Waterside Slope Erosion Protection) Pre-CEQA Determination Support EffortsThis element only includes the preliminary alternatives analysis and CEQA/NEPA document preparation (that work only eligible for 50% cost share by the State).

  • If PNM determines that site conditions require deviation from the Slurry Wall Construction Standards or Trench Construction Standards, it shall immediately notify Sierra Club.

  • For consistency with the other portions of Section 4.1.1.3, it is also recommended that this subsection be titled “Lime Basins Slurry Wall (Dewatering).” Response: a The descriptions of the individual remedial actions in Section 4.0 have been made more consistent; however, the details of the assessment for each remedial action are provided in Section 7.

Related to Slurry Wall

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • PAD means a Preauthorized Debit.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Grading means the movement or redistribution of the soil, sand, rock, gravel, sediment, or other material on a site in a manner that alters the natural contour of the land.

  • Encapsulation means the application of an encapsulant.

  • Barrier means Barrier Level x R (initial).

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Recycled water or “reclaimed water” means treated or recycled waste water of a quality suitable for non-potable uses such as landscape irrigation and water features. This water is not intended for human consumption.

  • Grease means an organic substance recoverable by procedures set forth in "Standard Methods" and includes but is not limited to hydrocarbons, esters, fats, oils, waxes and high molecular carboxylic acids;

  • Pile means any non-containerized accumulation of solid, nonflowing hazardous waste that is used for treatment or storage and that is not a containment building.

  • Potable water means water that is fit for human consumption;

  • Underground storage tank system means an underground storage tank and the connected underground piping, underground ancillary equipment, and containment system, if any.

  • Rubbing alcohol means any product containing isopropyl alcohol (also called isopropanol) or denatured ethanol and labeled for topical use, usually to decrease germs in minor cuts and scrapes, to relieve minor muscle aches, as a rubefacient, and for massage.