Slope definition
Slope means the inclination of a surface expressed as one unit of rise or fall for so many horizontal units;
Slope of a linear regression ( ) means:
Slope means an inclined earth surface, the inclination of which is expressed as the ratio of horizontal distance to vertical distance.
Examples of Slope in a sentence
Excavated slopes shall be consistent with Clause 4-5 Cut Slope Ratio.
To maintain and carry out at their own expense all works in respect of any and all Slope Structures as required by the Land Grant and in accordance with the Geotechnical Guidelines and the Slope Maintenance Manuals.
BUS: The Barrow Utilidor System owned by the North Slope Borough.
Conductivity (cm/sec) Drainage Length (ft) Drain Slope (%) Leachate Recirc.
A photocopy of the Slope Maintenance Manuals shall be provided to any Owner upon request at the expense of such Owner and on the payment of a reasonable charge.
More Definitions of Slope
Slope means the inclination, measured as a percentage (see Figure 9 below), of the supporting surface produced by raising or lowering one side of the supporting surface in relation to the horizontal in such a manner that the intersection of the supporting surface and the horizontal plane is perpendicular to the longitudinal median plane of the vehicle;
Slope of a linear regression (a1) means:
Slope means average inclination of a surface, measured from its horizontal, generally expressed as the ratio of a unit of vertical distance to a given number of units of horizontal distance (e.g., 1v:5h). It may also be expressed as a percentage or in degrees.
Slope means the deviation of a plane surface from the horizontal. It is usually expressed as a ratio or percentage of number of units of vertical rise or fall per unit of horizontal distance.
Slope means the ratio of the change in voltage, based on reference 1 pu voltage, to a change in reactive power in-feed from zero to maximum reactive power, based on maximum reactive power;
Slope means an inclined ground surface.
Slope means the degree of deviation of a surface from the horizontal, measured as a numerical ratio, percent, or in degrees. Expressed as a ratio, the first number is the horizontal distance (run) and the second is the vertical distance (rise), as 2:1. A 2:1 slope is a 50 percent slope. Expressed in degrees, the slope is the angle from the horizontal plane, with a 90-degree slope being vertical (maximum) and 45 degrees being a 1:1 or 100 percent slope.